CORDIS - EU research results

Design for Resource and Energy efficiency in cerAMic kilns


D3.1 Hot flue gas conditions report

Dcument on the chemical and thermal characterization of the hot flue gas including the particles loading

D1.1 SoA Analysis

Report containing a technology study on biofuel-fed CHP units

D4.1.1 Testing requirements

Document containing the specifications and standards regarding new materials testing

D7.1.2 Project website

Creation of the webpage dedicated to the DREAM project

D7.1.3 Leaflets, posters, articles

Collection of the documentation produced during the project and employed to disseminate the impact of the various actions


Numerical analysis of the exhaust gases recovery from a turbine CHP unit to improve the energy efficiency of a ceramic kiln

Author(s): L. Montorsi, M. Milani, M. Stefani, S. Terzi
Published in: Thermal Science and Engineering Progress, Issue 5, 2018, Page(s) 444-453, ISSN 2451-9049
Publisher: Elsevier
DOI: 10.1016/j.tsep.2018.01.013

CFD analysis of a full-scale ceramic kiln module under actual operating conditions

Author(s): Massimo Milani, Luca Montorsi, Matteo Stefani, Matteo Venturelli
Published in: E3S Web of Conferences, Issue 22, 2017, Page(s) 00117, ISSN 2267-1242
Publisher: Elsevier
DOI: 10.1051/e3sconf/20172200117

Effects of a CHP turbine unit exhaust gases recovery on the energy efficiency of a ceramic kiln

Author(s): Montorsi, L.; Milani, M.; Stefani, M.; Terzi, S.
Published in: Issue 1, 2018
Publisher: Elsevier

Acid emissions monitoring needs in ceramic tile industry: challenges derived from new policy trends

Author(s): Irina Celades, Salvador Gomar, Fernando Romero, Amisha Chauhan, Bertrand Delpech, and Hussam Jouhara
Published in: 2017
Publisher: E3S Web of Conferences 22, 00026 (2017) DOI: 10.1051/e3sconf/20172200026 ASEE17

A numerical approach for the energy efficiency analysis of an entire ceramic tunnel kiln

Author(s): Massimo Milani, Luca Montorsi, Matteo Venturelli, J.M. Tiscar, J. García-Ten
Published in: 2018

Measuring The Effect Of Coatings On The Heat Transfer Through Refractory Linings In The Laboratory

Author(s): R. Simmat, C. Dannert, B. Bernard, V. Finke, L. Guaita
Published in: 2018
Publisher: Proceedings 61th International Colloquium on Refractories

Energy efficiency enhancement and waste heat recovery in industrial processes by means of the heat pipe technology: Case of the ceramic industry

Author(s): Bertrand Delpech, Massimo Milani, Luca Montorsi, Davide Boscardin, Amisha Chauhan, Sulaiman Almahmoud, Hussam Jouhara
Published in: Journal Energy, Issue 158, 2018, Page(s) 656-665, ISSN 0360-5442
Publisher: Pergamon Press Ltd.

Experimental investigation of a radiative heat pipe for waste heat recovery in a ceramics kiln

Author(s): Bertrand Delpech, Brian Axcell, Hussam Jouhara
Published in: Energy, Issue 170, 2019, Page(s) 636-651, ISSN 0360-5442
Publisher: Pergamon Press Ltd.
DOI: 10.1016/

Searching for OpenAIRE data...

There was an error trying to search data from OpenAIRE

No results available