Objectif
KRAKEN will develop a disruptive hybrid manufacturing concept to equip SME and large industries with affordable All-in-one machine for the customised design, production/reparation and quality control of functional parts (made in aluminium, thermoset or both materials combined from 0,1m till 20m) through subtractive and novel additive technologies in vast working areas without floor space requirements.
In KRAKEN project, new additive technologies targeting large areas using aluminium grades as well as thermoset materials will be validated at lab scale (TRL 4) and in relevant environments (TRL 5) and finally integrated and combined (¡Error! No se encuentra el origen de la referencia.) for the demonstration in industrial relevant environments (TRL 6).
KRAKEN will collaborate to the consolidation of the Hybrid Manufacturing value chain by means of a consortium specially selected for linking research results to technological necessities in the fields of software, monitoring, automation, materials, standardization and end-users.
KRAKEN machine will be devoted to the production and reparation of functional parts of any size with dimensional tolerances under 0.3 millimetres and surface roughness under Ra 0,1 µm aiming to achieve 40% reduction in time and 30 % in cost and 25% increase in productivity.
KRAKEN machine will be based on hybrid approach merging MEGAROB subtractive machine (working area 20x6x3 metres) together with high efficient metallic and novel non-metallic AM.
After the end of the project, KRAKEN machine will be an affordable solution (1.5M€ estimated selling price, lower than current equipment and strategies for the production of final parts) for the customised production of large size functional parts; decreasing time (40%) and cost (30%), increasing productivity (at least 25%) and with a 90 % reduction of floor space required because it uses an ceiling installation broadly extended into the whole industry
Champ scientifique
- engineering and technologymechanical engineeringmanufacturing engineering
- natural sciencescomputer and information sciencessoftware
- engineering and technologymechanical engineeringvehicle engineeringautomotive engineering
- natural scienceschemical sciencesinorganic chemistrypost-transition metals
- natural sciencesearth and related environmental sciencesphysical geography
Programme(s)
Régime de financement
RIA - Research and Innovation actionCoordinateur
50720 Zaragoza
Espagne
Voir sur la carte
Participants (16)
CB21 6AL Cambridge
Voir sur la carte
2000 Neuchatel
Voir sur la carte
28033 MADRID
Voir sur la carte
10043 Orbassano
Voir sur la carte
10100 TURIN
Voir sur la carte
061072 Bucuresti
Voir sur la carte
9435 Heerbrugg
Voir sur la carte
Participation terminée
GL3 4AH GLOUCESTER
Voir sur la carte
50410 CUARTE DE HUERVA
Voir sur la carte
Voir sur la carte
CV35 0HU WARWICK
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
2449 LUXEMBOURG
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
1200 Bruxelles / Brussel
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
061072 Bucuresti
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
GL3 4AH GLOUCESTER
Voir sur la carte
Entité juridique autre qu’un sous-traitant qui est affiliée ou juridiquement liée à un participant. L’entité réalise des travaux dans les conditions prévues par la convention de subvention, fournit des biens ou des services pour l’action, mais n’a pas signé la convention de subvention. Le tiers respecte les règles applicables au participant qui lui est lié dans le cadre de la convention de subvention en ce qui concerne l’éligibilité des coûts et le contrôle des dépenses.
GL3 4AH GLOUCESTER
Voir sur la carte