Cel
KRAKEN will develop a disruptive hybrid manufacturing concept to equip SME and large industries with affordable All-in-one machine for the customised design, production/reparation and quality control of functional parts (made in aluminium, thermoset or both materials combined from 0,1m till 20m) through subtractive and novel additive technologies in vast working areas without floor space requirements.
In KRAKEN project, new additive technologies targeting large areas using aluminium grades as well as thermoset materials will be validated at lab scale (TRL 4) and in relevant environments (TRL 5) and finally integrated and combined (¡Error! No se encuentra el origen de la referencia.) for the demonstration in industrial relevant environments (TRL 6).
KRAKEN will collaborate to the consolidation of the Hybrid Manufacturing value chain by means of a consortium specially selected for linking research results to technological necessities in the fields of software, monitoring, automation, materials, standardization and end-users.
KRAKEN machine will be devoted to the production and reparation of functional parts of any size with dimensional tolerances under 0.3 millimetres and surface roughness under Ra 0,1 µm aiming to achieve 40% reduction in time and 30 % in cost and 25% increase in productivity.
KRAKEN machine will be based on hybrid approach merging MEGAROB subtractive machine (working area 20x6x3 metres) together with high efficient metallic and novel non-metallic AM.
After the end of the project, KRAKEN machine will be an affordable solution (1.5M€ estimated selling price, lower than current equipment and strategies for the production of final parts) for the customised production of large size functional parts; decreasing time (40%) and cost (30%), increasing productivity (at least 25%) and with a 90 % reduction of floor space required because it uses an ceiling installation broadly extended into the whole industry
Dziedzina nauki
- engineering and technologymechanical engineeringmanufacturing engineering
- natural sciencescomputer and information sciencessoftware
- engineering and technologymechanical engineeringvehicle engineeringautomotive engineering
- natural scienceschemical sciencesinorganic chemistrypost-transition metals
- natural sciencesearth and related environmental sciencesphysical geography
Program(-y)
Zaproszenie do składania wniosków
Zobacz inne projekty w ramach tego zaproszeniaSzczegółowe działanie
H2020-FOF-2016
System finansowania
RIA - Research and Innovation actionKoordynator
50720 Zaragoza
Hiszpania
Zobacz na mapie
Uczestnicy (16)
CB21 6AL Cambridge
Zobacz na mapie
2000 Neuchatel
Zobacz na mapie
28033 MADRID
Zobacz na mapie
10043 Orbassano
Zobacz na mapie
10100 TURIN
Zobacz na mapie
061072 Bucuresti
Zobacz na mapie
9435 Heerbrugg
Zobacz na mapie
Zakończenie uczestnictwa
GL3 4AH GLOUCESTER
Zobacz na mapie
50410 CUARTE DE HUERVA
Zobacz na mapie
Zobacz na mapie
CV35 0HU WARWICK
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
2449 LUXEMBOURG
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
1200 Bruxelles / Brussel
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
061072 Bucuresti
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
GL3 4AH GLOUCESTER
Zobacz na mapie
Podmiot prawny inny niż podwykonawca, stowarzyszony lub mający inne powiązania prawne z uczestnikiem. Podmiot realizuje prace na podstawie warunków umowy o grant, dostarcza towary lub świadczy usługi związane z działaniem, jednak nie podpisuje umowy o grant. Podmiot zewnętrzny przestrzega zasad i wymogów dotyczących danego uczestnika wynikających z umowy o grant, dotyczących kwalifikowalności kosztów oraz kontroli wydatków.
GL3 4AH GLOUCESTER
Zobacz na mapie