Objectif
The principal aims of the project are to determine firm design criteria for ignition prevention pick sprays and to validate a practical system using a full-scale experimental rig.
The introduction of stringent water pressure and flow monitoring has enabled high quality experimental data to be obtained relating ignition probability to the geometry and performance of back-face flushing sprays.
A relationship between frictional ignition probability, spray geometry and water pressure has been confirmed which can be used as a basis for designing effective radial pick-water spray systems.
The experimental results obtained with the radial picks indicate that less water is required behind the pick than is currently specified in British Coal guidance notes for ignition prevention. However, it is important that high-quality nozzles which produce well-formed solid cone sprays are used.
When point attack and radial pick data are plotted on the same graph, the trend indicates that optimum spray design may be independent of pick type. Unfortunately, there are too few point attack pick-water spray data to be conclusive. Further experiments are needed with point attack picks using a proprietary box mounted spray which provides a higher spray density than can be achieved with the experimental arrangement described in this report.
An average of about 9 frictional ignitions per year have occurred in Britain during the period 1986 to 1992 on coalfaces and in drivages. The majority of the incidents have occurred whilst the heading or coalface machine was cutting sandstone in the roof or floor of the seam in the presence of methane derived either from cut coal or from a localised feeder.
The principal protection against frictional ignitions in British mines is provided by machine ventilation on the coalface and cutting zone ventilation in headings. Water applied to the back of picks generally forms a second line of defence but becomes of primary importance in situations where unusually high localised methane flows are prone to arise.
In a previous study a relationship was proposed for radial and forward attack picks which suggests a reduction in water flow to the back of the cutting picks could be traded off against pressure without incurring an increase in ignition risk.
The design principle adopted required the leading edge of the spray to pass through the base of the carbide insert. In this way protection is provided for a de-tipped tool whilst allowing a high proportion of the incident spray to strike the rock immediately behind the pick.
The principal objective of this project was to determine and validate quantitative design criteria to facilitate the development of effective, low water consumption ignition control sprays.
Spray systems applied to both radial and point attack picks were to be investigated and the benefits of pick activated sprays assessed.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Données non disponibles
Coordinateur
DE15 0QD Burton upon Trent
Royaume-Uni
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.