Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2022-11-21

Control of respirable dust and methane at high output sites

Objetivo

To complete work already in progress aimed at providing ventilation systems for effective dust control and ventilation of the cutting zone, on machines producing large makes of dust and methane, particularly where output is high.

To reduce the water consumption of spray systems fitted to cutting heads for control of dust and frictional ignitions.

To develop a computer 'expert system' to give advice to collieries on dust control in drivages and on faces

With coalface outputs still increasing, and drivage rates rising to meet the needs of the larger proportion of longwall coalfaces worked on retreat, the effectiveness of environmental control systems must be improved to ensure that the gains made in safety and health are not jeopardised in the future. The objectives of the present project were to improve and develop control systems for sites where outputs were high. For coalfaces the main areas of work were:-

a) Enhancement of extraction drum efficiency.
b) Reduction of water flows to shearers.
c) Improvement of extraction drum reliability.

In drivages, British Coal is increasingly using roof-bolts for primary roof support in high speed, flat-topped drivages cut by American-type continuous miners. Development of effective dust and methane control systems for such sites is of paramount importance to the future of Bitish Coal's drive for increased productivity. Consequently a considerable proportion of the project was spent on testing and development of control systems for these machines.

In arch section drivages, introduction of water powered cutting zone ventilators for ignition prevention on all drivage machines led to reduced advance rates at some sites due to problems with excess water on the floor. Reduction of water requirements for ventilation on boom-type machines was therefore another objective of the project.

In addition, because of the expected reduction in speciaist environmetnal staff at mines in the future, development of a computer expert system for dust control was started, although little progress was made due to the higher priority of work on the continuous miners.

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

Datos no disponibles

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

Datos no disponibles

Coordinador

British Coal plc
Aportación de la UE
Sin datos
Dirección
Eastwood Hall
NG16 3EB Eastwood
Reino Unido

Ver en el mapa

Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos
Mi folleto 0 0