Skip to main content

Advanced materials and processes to improve performance and cost-efficiency of Shallow Geothermal systems and Underground Thermal Storage

Deliverables

Social life cycle Assesment

A social analysis of the materials and technologies will be conducted using social life cycle assessment (S-LCA). S-LCA will assess the social and socio-economic aspects of materials or processes and their potential positive and negative impacts along their life cycle. These aspects assessed in S-LCA are those that may directly or indirectly affect stakeholders, including workers, local community, consumers, value chain actors and society. S-LCA also follows a life cycle approach, but the impacts in this case are related to socio-economic processes and comprise human rights, working conditions, health and safety, socio-economic repercussion, and so forth.

Life Cycle Assesment

Report describing the application of the Life Cycle Assesment (LCA) methodology to evaluate the environmental burdens associated with a product or process by identifying and quantifying energy and materials used and wastes released to the environment; to assess the impact of those energy and material uses and releases to the environment; and to identify and evaluate opportunities for environmental improvements. LCA includes the entire life cycle of the product or process, which encompasses: extracting and processing raw materials; manufacturing, transportation and distribution; use, reuse and maintenance, and final disposal.

Final Dissemination and Communication Plan, including a Report on Training & Clustering activities

Final Dissemination and Communication Plan, including a Report on Training & Clustering activities

E-learning modules

E-learning modules

Searching for OpenAIRE data...

Publications

On the Influence of Operational and Control Parameters in Thermal Response Testing of Borehole Heat Exchangers

Author(s): Borja Badenes, Miguel Mateo Pla, Lenin Lemus-Zúñiga, Begoña Sáiz Mauleón, Javier Urchueguía
Published in: Energies, Issue 10/9, 2017, Page(s) 1328, ISSN 1996-1073
DOI: 10.3390/en10091328

How Reliable Are Standard Thermal Response Tests? An Assessment Based on Long-Term Thermal Response Tests Under Different Operational Conditions

Author(s): Javier Urchueguía, Lenin-Guillermo Lemus-Zúñiga, Jose-Vicente Oliver-Villanueva, Borja Badenes, Miguel Pla, José Cuevas
Published in: Energies, Issue 11/12, 2018, Page(s) 3347, ISSN 1996-1073
DOI: 10.3390/en11123347

GEOCOND: Advanced materials and processes to improve performance and cost-efficiency of Shallow Geothermal systems and Underground Thermal Storage

Author(s): Sanner, B., Urchueguia, J. F.
Published in: ENERSTOCK 2018, 14th International Conference on Energy Storage, Issue every 3 years, 2018, Page(s) paper ID 172

Project GEOCOND: Advanced Materials and Processes to Improve Performance and Cost Efficiency of Shallow Geothermal Systems and Underground Thermal Energy Storage

Author(s): Javier Urchueguía, Burkhard Sanner
Published in: Proc. European Geothermal Congress 2019 (EGC 2019), Den Haag, Issue every 3 years, 2019, Page(s) "paper #228, 9 p."

GIS-Supported evaluation and mapping of the physical parameters affecting shallow geothermal systems efficiency at a continental scale

Author(s): A. Ramos-Escudero, M.S. Garcá-Cascales, J.M. Cuevas, J.F. Urchueguía, B. Sanner
Published in: Proc. European Geothermal Congress (EGC 2019), Den Haag, Issue every 3 years, 2019, Page(s) "paper #287, 10 p."

Assessing the Shallow Geothermal Laboratory at Universitat Politècnica de València

Author(s): Miguel A. Mateo Pla, Borja Badenes, Lenin Lemus, Javier F. Urchueguía
Published in: Proc. European Geothermal Congress (EGC 2019), Den Haag, Issue every 3 years, 2019, Page(s) "paper #343, 9 p."

Optimization methodology of borehole heat exchangers (BHE) according geometric characteristics material properties and installation and operating cost

Author(s): Borja Badenes, Miguel A. Mateo, José M. Cuevas, Lenin G. Lemus, Jose V. Oliver, Javier F. Urchueguía
Published in: Alternative Energy Sources, Materials and Technologies (AESMT'19), Issue Vol. 1 (2019), 2019, Page(s) 37-38, ISSN 2603-364X