Skip to main content

Improvement of the plastic packaging waste chain from a circular economy approach

Deliverables

System design and preliminary specifications

System design and preliminary specifications [SAV; M6]: - This deliverable will include the results of T2.1. including the container design and architecture, list of materials and component and flow diagrams. -The information on this deliverable will be the basis for T2.2. to 2.7. and WP3.

Technical description of the sorter to be developed

[D4.2] Technical description of the sorter to be developed [PICVISA, M16]. -This deliverable is based on the results of T4.2. and T4.3. -It is a report describing the technical specifications and design of the sorter: THz (Tera-Hertz) imaging and Whisk Broom Scanner. -This deliverable is the basis for T4.4. and T4.5.

Technical description of the production processes in lab scale.

[D5.2] Technical description of the production processes in lab scale. [SINTEF, M30]. -This deliverable is based on the results of T5.2. -It will be a report technically describing the production processes developed in lab scale: formulation of materials and process parameters. -This deliverable will be the basis for T5.3.

General architecture of the collection and transport system

General architecture of the collection and transport system: User/ system requirements [ITENE, M4]. -This deliverable will be based on the result of WP2 and the initial expectations defined in T3.1. and T3.3. - It will be a report describing the general architecture of the system as well as the requirements of users and the system in general. This document will guide the work within the WP. -This deliverable will be the basis for all the tasks of the WP (T3.1. to T3.5).

Sorting requirements

D4.1] Sorting requirements [AXION, M10]. -This deliverable is based on the results of T4.1. -It is a report on the requirements of the sorted fractions to be taken into consideration for the development of the prototype: composition of packaging waste collected and sorted, characterization protocol, technical requirements of sorted fractions. -This deliverable is the basis for all the tasks of this WP (T4.2 to T4.5.).

Life cycle definition and description

[D7.1] Life cycle definition and description [ITENE, M8]. -This deliverable is based on the results of T7.1. - It will include the life cycle model of the current plastic waste collection, transport, sorting and treatment in the three cities and in a EU level. -This deliverable is the basis for T7.2., T7.3., T7.4., T7.5. and T7.6.

Pilot Utrecht

[D6.3] Pilot Utrecht [UTRECHT, M34]. -This deliverable is based on the results of T6.3. - It is a report describing the results obtained in the pilot in Utrecht. - This deliverable is the basis for T6.4. and T6.5.

Characterization protocol and compensation procedure

Characterization protocol and compensation procedure. [ITENE, M18]. -This deliverable will be based on the results of the T3.3. -It will be a report on the description of the procedure to characterize unitary garbage bags by waste managers and the associated proposal for citizens´compensation. -This deliverable will be the basis for T3.5.

Pilot Valencia

[D6.2] Pilot Valencia [LAS NAVES, M30]. -This deliverable is based on the results of T6.2. - It is a report describing the results obtained in the pilot in Valencia - This deliverable is the basis for T6.3., T6.4. and T6.5.

Specifications required by end users and comparison with sorted material. Pretreatment needed. Final

[D5.3] Specifications required by end users and comparison with sorted material. Pretreatment needed. Final [AXION, M35]. -This deliverable will include the final results of T5.1. -It will be a report describing the technical specifications required in the material for each one of the applications to be developed: foam boards, automotive parts, bituminous roofing membranes, garbage bags and urban furniture. Also, a comparative will be done with the properties of the materials obtained in WP4. -This deliverable will be the basis for T5.3. and T5.4.

Market Analysis for treatment of plastic packaging waste market. Updated M18-36

[D8.1] Market Analysis for treatment of plastic packaging waste market [KIMbcn, M6]. -It will be updated on M18 and M36. -This deliverable is based on the results of T8.2. -It will be a study of actual treatment of plastic packaging waste market needs and size in order to better define the approach for commercialisation. Updated M18-36

Initial Environmental, Economic and Social LCA

[D7.2] Initial Environmental, Economic and Social LCA [ITENE, M18]. -This deliverable is based on the preliminary results of T7.2., T7.3. and T7.4 -It will be based on the environmental, economic and social LCA for the initial situation on the three cities and in Europe in general. -This deliverable is the basis for T7.5.

Training Plan [SAV, M10].

[D9.5] Training Plan [SAV, M10]. -This deliverable is based on the results of T9.3. -It is a scheme and report of the planned training activities.

Specifications required by end users and comparison with sorted material. Pretreatment needed. Draft

[D5.1] Specifications required by end users and comparison with sorted material. Pretreatment needed. Draft [AXION, M15]. -This deliverable will include the preliminary results of T5.1. -It will be a report describing the technical specifications required in the material for each one of the applications to be developed: foam boards, automotive parts, bituminous roofing membranes, garbage bags and urban furniture. Also, a comparative will be done with the properties of the materials obtained in WP4. -This deliverable will be the basis for T5.2., T5.3. and T5.4.

Driving Behaviour Guidance

-This deliverable will be based on the results of T3.4. -It will be a report on the technical description of sensor CAN-Bus and efficient driving. -This deliverable will be the basis for T3.5.

Dissemination and communication plan [ICLEI, M6].

[D9.3] Dissemination and communication plan [ICLEI, M6]. -This deliverable is based on the results of T9.1 and T9.5. -It is a scheme and report of the planned dissemination and communication activities. -This deliverable is the basis for T9.2 and T9.6.

Definition of the PlastiCircle data management plan [ICLEI, M6].

[D9.2] Definition of the PlastiCircle data management plan [ICLEI, M6]. -This deliverable is based on the results of all WPs -It is a plan on how to manage the data generated within the project. Concretely it is a first version of the PlastiCircle Data Management Plan, including the link to PlastiCircle portal. -This deliverable is the basis for dissemination and communication activities

Visual identity: logo and templates

D9.1] Visual identity: logo and templates [ICLEI, M3]. -This deliverable is based on the results of T9.6.

Searching for OpenAIRE data...