Deliverables Websites, patent fillings, videos etc. (1) Project Website. This deliverable will consist in the set-up of the project website that is part of the work of task T8.1. Demonstrators, pilots, prototypes (2) Validation of the developed demanufacturing process-chains and characterization of the recovered materials. This deliverable will report the work of task T2.4. It will contain the results of the validation of the developed demanufacturing processes on the samples of disassembled parts obtained in the target use-cases. Realization of a physical and a virtual library of rGFRP and rCFRP FiberEUse parts. This deliverable will report the work of task T77 It will consist of a physical and virtual library of the demonstrated new products and the related functionalities and properties to be showcased at large group of stakeholders Documents, reports (15) Part validation by non-destructive analysis. This deliverable will report the work of task T4.6. It will contain a description and the results of tests on composite parts of non destructive analysis of remanufactured products. Mapping and assessment of waste composition. This deliverable will report the work of task T1.1 concerning the analysis, mapping and assessment of the waste material composition and volumes, in the target use-cases. Recovered glass and carbon fibers characterization This deliverable will report the work of task T2.5. It will contain the characterization of the recycled fibers and a benchmark of the developed solutions with respect to state-of-the-art and the target KPIs. Composite material validation and testing. This deliverable will report the work of task T3.5. It will contain a report with the assessment of material properties derived by the application of the developed material preparation methods, to be used to benchmark and to select the suitable technologies for demonstration. Generalization to future industrial scenarios This deliverable will report the work of task T15 It will contain a formalized vision of the application potential of the FiberEUse solution in future industrial scenarios for European Manufacturers The deliverable will include a highvisibility book and a public white paper Customer feedback collection and co-design approach. This deliverable will report the work of task T5.1 related to the development of the approach for gathering customer feedback for co-design. It will contain the description of the methodology and the main mechanisms to support the co-design procedure. Reverse logistics optimization. This deliverable will report the work of task T7.2. It will contain the description of the methodology for reverse logistics optimization and the optimal configuration of reverse logistics networks in the demo-cases. Guidelines for composites demanufacturing and energy assessment This deliverable will report the work of tasks T2.6 and T2.7. It will contain the energy-related assessment of the developed technologies and generalized demanufacturing guidelines for composite-made complex products. Legislation boundaries and recommendations for policy makers. This deliverable will report the work of task T76 It will contain the identification of potential legislative barriers and a set of recommendations for policy makers on how the legislation should be improved in order to promote the reuse of composite materials in the target sectors Catalogue of dissemination and exploitation activities This deliverable will report a public summary of all the dissemination and exploitation activities carried out in the FiberEUse project New service-oriented business models. This deliverable will report the work of task T7.1. It will contain the description of the business models to be implemented in order to increase the profitability of the business cases in the project demonstrators. Final evaluation of KPIs and impacts of the use cases This deliverable will report the work of task T69 related to the analysis of the final status of the democases Generalized product design guidelines. This deliverable will report the work of task T5.6. It will contain the generalized product design guidelines for improving the ability to disassemble and demanufacture the input composite-made products. Ex-ante analysis of the use cases and approach for demonstration This deliverable will report the work of task T6.9 related to the analysis of the ex-ante status of the demo-cases. A revision of the target KPIs and a description of the design approach for the demonstration will be reported. Economic risk assessment of the new value-chain business cases. This deliverable will report the work of task T75 It will contain a description of the developed methodology for risk assessment and the identification and quantification of the major risks in the valuechains of the demonstrators Other (4) LCA and LCC solution. This deliverable will report the work of task T74 It will contain a description of the LCA and LCC methodologies as well as the software modules integrated in the cloudbased platforms to support environmental and economic analysis Industrial training and value-chain thematic workshops. This deliverable will report the work of task T86 It will consist of a report including the training objectives and the developed training material as well as the outcomes from the thematic workshops Cloud-based software for value-chain integration. This deliverable will report the work of task T73 It will contain a description of the main functionalities of the cloudbased platform for valuechain integration as well as the delivery of the software platform Customer feedback collection software tool. This deliverable will report the work of task T5.1 related to the development of a web-based application to support customer feedback collection for product co-design. Publications Peer reviewed articles (10) Metallization of Thermoplastic Polymers and Composites 3D Printed by Fused Filament Fabrication Author(s): Alessia Romani; Andrea Mantelli; Paolo Tralli; Stefano Turri; Marinella Levi; Raffaella Suriano Published in: Technologies, Issue 9, 2021, ISSN 2227-7080 Publisher: mdpi DOI: 10.3390/technologies9030049 Resizing Approach to Increase the Viability of Recycled Fibre-Reinforced Composites Author(s): Vsevolod Matrenichev, Maria Clara Lessa Belone, Sarianna Palola, Pekka Laurikainen and Essi Sarlin Published in: Materials, Issue 13(24), 2020, ISSN 1996-1944 Publisher: MDPI Open Access Publishing DOI: 10.3390/ma13245773 Environmental Profile and Technological Validation of New High-Tg Unsaturated Polyesters from Fully Bio-Based Monomers and Reactive Diluents Author(s): Raffaella Suriano; Maria Nelly Garcia Gonzalez; Stefano Turri Published in: Journal of Polymers Environment, Issue 29(4), 2021, Page(s) 1-12, ISSN 1566-2543 Publisher: Kluwer Academic/Plenum Publishers DOI: 10.1007/s10924-020-01928-z Additive Re-Manufacturing of Mechanically Recycled End-of-Life Glass Fiber-Reinforced Polymers for Value-Added Circular Design. Author(s): Alessia Romani; Andrea Mantelli; Raffaella Suriano; Marinella Levi; Stefano Turri Published in: Materials, Issue 13, 2020, ISSN 1996-1944 Publisher: MDPI Open Access Publishing DOI: 10.3390/ma13163545 Reverse supply network design for circular economy pathways of wind turbine blades in Europe Author(s): Athanasios Rentizelas; Athanasios Rentizelas; Nikoletta L. Trivyza; Sarah Oswald; Stefan Siegl Published in: International Journal of Production Research, 2020, ISSN 0020-7543 Publisher: Taylor & Francis DOI: 10.1080/00207543.2020.1870016 Elastic constant determination of unidirectional composite via ultrasonic bulk wave through transmission measurements: A review Author(s): David A.P. Paterson, Winifred Ijomah, James F.C. Windmill Published in: Progress in Materials Science, Issue 97, 2018, Page(s) 1-37, ISSN 0079-6425 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.pmatsci.2018.04.001 UV-Assisted 3D Printing of Polymer Composites from Thermally and Mechanically Recycled Carbon Fibers Author(s): Andrea Mantelli; Alessia Romani; Raffaella Suriano; Marco Diani; Marcello Colledani; Essi Sarlin; Stefano Turri; Marinella Levi Published in: Polymers, Issue 13(5), 2021, ISSN 2073-4360 Publisher: mdpi DOI: 10.3390/polym13050726 Remanufacturing of end-of-life glass-fiber reinforced composites via UV-assisted 3D printing Author(s): Andrea Mantelli; Marinella Levi; Stefano Turri; Raffaella Suriano Published in: Rapid Prototyping Journal, Issue 26-6, 2020, Page(s) 981-992, ISSN 1355-2546 Publisher: Emerald Group Publishing Ltd. DOI: 10.1108/rpj-01-2019-0011 Direct Ink Writing of Recycled Composites with Complex Shapes: Process Parameters and Ink Optimization Author(s): Andrea Mantelli; Alessia Romani; Raffaella Suriano; Marinella Levi; Stefano Turri Published in: Advanced Engineering Materials, Issue 9, 2021, ISSN 1527-2648 Publisher: Wiley Onlnie Library DOI: 10.1002/adem.202100116 Reverse supply network design for circular economy pathways of wind turbine blades in Europe Author(s): Athanasios Rentizelas, Nikoletta Trivyza, Sarah Oswald, Stefan Siegl Published in: International Journal of Production Research, 2020, ISSN 0020-7543 Publisher: Taylor & Francis DOI: 10.1080/00207543.2020.1870016 Conference proceedings (6) Energy consumption assessment and modeling of a comminution process: The glass fibers reinforced composites case-study Author(s): Marco Diani; Marcello Colledani Published in: Procedia CIRP, Issue 90, 2020, Page(s) 483-487 Publisher: ELSEVIER DOI: 10.1016/j.procir.2020.01.117 FiberEUse: Large-Scale Demonstration of New Circular Economy Value Chains Based on the Reuse of End-of-Life Fiber-Reinforced Composites—A Circular It Platform to Manage Innovative Design and Circular Entities Author(s): Dena Arabsolgar, Andrea Musumeci Published in: Issue 2504-390, 2021, ISSN 2504-3900 Publisher: MDPI DOI: 10.3390/proceedings2020065023 Reverse logistics optimisation model for end-of-life wind turbine blades waste composites Author(s): Athanasios Rentizelas, Nikoletta Trivyza, Georg Lichtenegger Published in: 25th International Joint Conference on Industrial Engineering and Operations Management, 2019 Publisher: International Joint Conference on Industrial Engineering and Operations Management Indirect 3D Printing of recycled glass fibres from end-of-life products: towards a design engineering approach to circular design Author(s): Alessia Romani, Marinella Levi Published in: 2021 Publisher: Verlag der Technischen Universität Graz DOI: 10.3217/978-3-85125-842-4-10 Cyber-Physical Systems formalization in de- and remanufacturing and application to size reduction stage Author(s): Marco Diani; Marcello Colledani Published in: Procedia CIRP, Issue 91, 2020, Page(s) 741-746 Publisher: ELSEVIER DOI: 10.1016/j.procir.2020.03.117 High throughput mechanical micro-scale characterization of composites and the utilization of the results in finite element analysis Author(s): Pekka Laurikainen, Sandra Pötz, Jarno Jokinen, Mathias Essen von, Mari Lindgren, Pasi Kallio, Mikko Kanerva, Gernot Oreski, Essi Sarlin Published in: Proceedings of the 18th European Conference on Composite Materials (ECCM), 2018, ISBN 9781510896932 Publisher: Applied Mechanics Laboratory Searching for OpenAIRE data... There was an error trying to search data from OpenAIRE No results available