Resultado final
The S-N curves and fatigue limit for specimens with an as built AM surface will be compared to that of specimens with different post processing histories. The results will be analyzed and reported.
Evaluation of at least five different post processes for improved surface characteristicsSeveral different post processing methods will be investigated and their effect on fatigue performance of EBM and SLM surfaces will be determined.
Demands for complex metal AM design and modellingA report that links critical metal powder bed AM process parameters and post-processing options to the designer’s geometrical specifications. The report will suggest how these interrelated parameters could be controlled in a CAE-assisted design environment to improve the designer’s ability to predict the performance of components built by powder bed AM.
Material characterization of surface and anisotropic propertiesThe mechanical properties of AM components will be dependent of the building orientation. There are several different reasons for this but the main source of anisotropy comes from; (1) non-random grain orientation due columnar grain growth during the building process, (2) the impact of the high surface roughness for thin structures elongated in one direction, (3) non-random orientation or clustering of defects along a certain direction caused by either lack of fusion or hot cracking between columnar grains during solidification and cooling. Mechanical testing will be will be performed on samples with different geometries, processing histories and orientations. The results will be analyzed and reported.
Final dissemination and exploitation planThe final update and publication of the dissemination and exploitation plan
Initial dissemination and exploitation plan including communicationOne of the key objectives of the project is to maximise the impact of the project results by dissemination and exploitation activities including communication. Further, dissemination and exploitation of project results are an obligation for every Horizon 2020 project. Therefore, the project will set up a dissemination and exploitation plan at the beginning of the project which will be then carried on and updated throughout the project's lifespan.
A computer implementation which makes it possible for a geometry description in CATIA to be used by a mesh generator, giving input to the FE program TRINITAS.
Computer implementation of TO method for optimal AM including uncertaintyA computer implementation of the deterministic approach to uncertainties that considers residual stresses and uncertain material properties.
Computer implementation of TO method for optimal AMA computer implementation of TO, based on the SIMP approach, taking into account (1) anisotropic material properties, (2) the built direction of the AM process, (3) graded material, and (4) stress constraints modeling experimentally determined yield and strength properties.
The purpose of this deliverable is to to develop the project website and to create the dissemination materials to promote and communicate the project at local, national and European level.
Publicaciones
Autores:
Shyam Suresh, Carl-Johan Thore, Bo Torstenfelt, Anders Klarbring
Publicado en:
Structural and Multidisciplinary Optimization, 2020, ISSN 1615-147X
Editor:
Springer Verlag
DOI:
10.1007/s00158-020-02644-x
Autores:
Mikael Segersäll; Annie Kerwin; Alex Hardaker; Magnus Kahlin; Johan Moverare
Publicado en:
Fatigue & Fracture of Engineering Materials & Structures, Edición Volume44, Edición7, 2021, Página(s) 1931-1943, ISSN 1460-2695
Editor:
John Wiley & Sons Ltd
DOI:
10.1111/ffe.13461
Autores:
Stefan B. Lindström, Carl-Johan Thore, Shyam Suresh, Anders Klarbring
Publicado en:
International Journal of Fatigue, Edición 136, 2020, Página(s) 105582, ISSN 0142-1123
Editor:
Elsevier BV
DOI:
10.1016/j.ijfatigue.2020.105582
Autores:
Anton Wiberg, Johan Persson, Johan Ölvander
Publicado en:
Rapid Prototyping Journal, Edición ahead-of-print/ahead-of-print, 2019, ISSN 1355-2546
Editor:
Emerald Group Publishing Ltd.
DOI:
10.1108/rpj-10-2018-0262
Autores:
M. Kahlin, H. Ansell, D. Basu, A. Kerwin, L. Newton, B. Smith, J.J. Moverare
Publicado en:
International Journal of Fatigue, Edición 134, 2020, Página(s) 105497, ISSN 0142-1123
Editor:
Elsevier BV
DOI:
10.1016/j.ijfatigue.2020.105497
Autores:
Shyam Suresh, Stefan B. Lindström, Carl-Johan Thore, Bo Torstenfelt, Anders Klarbring
Publicado en:
Structural and Multidisciplinary Optimization, Edición 61/3, 2020, Página(s) 1011-1025, ISSN 1615-147X
Editor:
Springer Verlag
DOI:
10.1007/s00158-019-02400-w
Autores:
C.-J. Thore, H. Alm Grundström, B. Torstenfelt, A. Klarbring
Publicado en:
Structural and Multidisciplinary Optimization, Edición 60/1, 2019, Página(s) 59-67, ISSN 1615-147X
Editor:
Springer Verlag
DOI:
10.1007/s00158-019-02194-x
Autores:
M. Kahlin, H. Ansell, D. Basu, A. Kerwin, L. Newton, B. Smith and J.J. Moverare
Publicado en:
International Journal of Fatigue, Edición Volume 134, May 2020, 105497, 2020, ISSN 1879-3452
Editor:
Elsevier Bv
Autores:
M. Kahlin, H. Ansell, A. Kerwin, B. Smith, J. Moverare
Publicado en:
International Journal of Fatigue, Edición 142, 2021, Página(s) 105945, ISSN 0142-1123
Editor:
Elsevier BV
DOI:
10.1016/j.ijfatigue.2020.105945
Autores:
Shyam Suresh; Stefan B. Lindström; Carl-Johan Thore; Anders Klarbring
Publicado en:
Structural and Multidisciplinary Optimization, Edición 63, 2021, Página(s) 161–172, ISSN 1615-147X
Editor:
Springer Verlag
DOI:
10.1007/s00158-020-02677-2
Autores:
Magnus Kahlin
Publicado en:
Doctoral thesis, 2021, ISBN 9789179296476
Editor:
Linköping University Electronic Press
DOI:
10.3384/diss.diva-178726
Autores:
Henrik Alm Grundström
Publicado en:
Independent thesis advanced level, Edición ISRN: LIU-IEI-TEK-A--17/02790—SE, 2017
Editor:
Linköping University Electronic Press
Autores:
Anton Wiberg
Publicado en:
Swedish Licentiate Thesis, 2019, ISBN 978-91-7929-985-9
Editor:
LiU-Tryck
Autores:
Henrik Alm Grundström
Publicado en:
Report, Edición ISRN: LIU-IEI-WP--18/00009—SE, 2018
Editor:
Linköping University Electronic Press
Autores:
Henrik Alm Grundström
Publicado en:
Tutorial Document, 2018
Editor:
Linköping: Linköping University Electronic Press
Autores:
Anton Wiberg, Johan Persson and Johan Ölvander
Publicado en:
Proceedings of the Tools and Methods of Competitive Engineering (TMCE) 2018 Symposia edited by I. Horváth and J.P. Suárez, Edición 7-11 May, 2018, Las Palmas de Gran Canaria, Spain, 2018, Página(s) 533-542, ISBN 978-94-6186-910-4
Editor:
TMCE 2018
Autores:
Shyam Suresh, Stefan B. Lindström, Carl-Johan Thore, Bo Torstenfelt, Anders Klarbring
Publicado en:
EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization, 2019, Página(s) 844-854, ISBN 978-3-319-97772-0
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-97773-7_73
Autores:
Anton Wiberg, Johan Persson, Johan Ölvander
Publicado en:
Volume 2A: 45th Design Automation Conference, 2019, ISBN 978-0-7918-5918-6
Editor:
American Society of Mechanical Engineers
DOI:
10.1115/detc2019-97915
Autores:
Johan A. Persson, Anton Wiberg
Publicado en:
AIAA Scitech 2020 Forum, 2020, ISBN 978-1-62410-595-1
Editor:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2020-0547
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles