Objetivo
Several technological applications need tools for keeping a stable micrometric distance between two surfaces. The requirements are more stringent if electrical insulation has to be guaranteed between the surfaces and even more if also thermal insulation has to be satisfied.
The dielectric microspacers (DMSs) here described represent a microtechnology able to meet all these requirements. DMSs were developed in the ProME3ThE2US2 FET project to separate two electrodes of an innovative high-temperature solar cell prototype. Since that device is part of the wider set of thermionic energy converters (TECs), DMS technology can be successfully applied to them, thus solving a technical problem only mitigated by palliative solutions during the last 50 years.
The potentials connected to DMS technological innovation are scalability, robustness, high resolution, fabrication on large areas, thermal resistance and stability, very high electric and thermal resistivity, uniformity of physical properties, versatility of arrangement, and very accurate control of the separation gap.
As mentioned, the immediate application is in TECs, initially for nuclear and aerospace applications and subsequently for allowing their introduction in the enormously increasing sector of industrial waste heat recovery. Application is expected also in fabrication of electronic devices.
However, since new devices require effective and performing tools, in the same way as new tools open new perspectives for hi-tech devices, novel applications can be imagined. With this aim, DMS project starts with a critical study on possible complementary applications as well as on technical limitations and improvements. This activity will be preparatory for protecting the intellectual property in the widest possible application domain. A second phase will focus on technology transfer by qualifying and quantifying the possible market(s) and actors, aimed at defining an effective exploitation plan and promotion strategy.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véase: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véase: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- ingeniería y tecnologíaingeniería ambientalenergía y combustiblesenergía fósilcarbón
- ingeniería y tecnologíaingeniería ambientalenergía y combustiblesenergía fósilpetróleo
- ciencias socialeseconomía y empresagestión y empresasmodelo de negocio
- ingeniería y tecnologíaotras ingenierías y tecnologíasmicrotecnología
- ingeniería y tecnologíaingeniería ambientalenergía y combustiblesenergía renovableenergía solarenergía solar de concentración
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Convocatoria de propuestas
(se abrirá en una nueva ventana) H2020-FETOPEN-2016-2017
Consulte otros proyectos de esta convocatoriaConvocatoria de subcontratación
H2020-FETOPEN-4-2016-2017
Régimen de financiación
CSA - Coordination and support actionCoordinador
00185 Roma
Italia