European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS

Development of methods for deriving optimized shapes of morphing structures considering both aerodynamic performances and specific mechanical morphing boundary conditions

Objetivo

The OPTIMOrph project addresses the development of a robust and reliable numerical optimization methodology able to identify target shapes for deflected positions of morphing structures based on optimal aerodynamic characteristics (i.e. basically lift and drag), while taking into account in a consistent way feasibility issues related to mechanical considerations and material properties. This is actually a requirement very specific to morphing structures, where the mechanical feasibility and complexity is one of the key features to be taken into consideration throughout the design process. The project objectives will be achieved through the implementation of a general multi-disciplinary, multi-objective, multi-constrained optimization procedure able to enhance aerodynamic performance in a compliant way with the pertinent morphing mechanisms and materials limitations, thus enabling the implementation of a step-change in the design of morphing structures. In OPTIMOrph, a multi-fidelity approach will be adopted, in which a high-fidelity FSI solver will be used for reconstruction of a surrogate model (low-fidelity), which in turn will assist a very advanced optimization engine where GAs featuring unique operators are included. This approach will ensure that the optimal solutions achieved are accurate and reliable, while keeping the computational effort within acceptable limits also for an industrial application. The methodology implemented in OPTIMOrph will contribute to the inclusion of morphing technologies since the very early stages of the aircraft design process and will open unprecedented design opportunities to be applied either to re-engineering of current aircraft or to completely new upcoming aircraft architectures. Although very general, the procedure will be applied to a morphing wing leading edge, and a series of optimal indications will be delivered for implementing an integrated aerodynamic/structural proof of concept.

Coordinador

HIT09 SRL
Aportación neta de la UEn
€ 236 850,00
Dirección
PIAZZETTA BETTIOL GIUSEPPE 15
35137 Padova Pd
Italia

Ver en el mapa

Pyme

Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención.

Región
Nord-Est Veneto Padova
Tipo de actividad
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Enlaces
Coste total
€ 236 850,00

Participantes (1)