Deliverables
The report contains the proceedings of the workshop on AFA steels
The report contains a proposal for Material Design Curves relevant to HLM conditions
The report contains a proposal for Design Rules and Assessment procedures on the incorporation of environmental effects to RCCMRx and related to welds
The report describes the characteristics of the weld specimen preparation for residual stress measurements and modelling, including experimental data from welded specimens of 316L(N)
The report describes the optimized process parameters for PLD, gun deposition and surface alloying
The report contains the guidelines for qualification of AFA steels surface alloys and coatings
The report contains the final results on coatings and surface alloys
The report contains the proceedings of the workshop on Evolution of austenitic stainless steels and of protective coatings under irradiation
The report contains the progress of the activities and the results obtained during the first 18 months of the Project
The report contains an assessment of the liquid metal corrosion for candidate materials and welds of MYRRHA primary circuitNote that KIT substituted CORRIDA loop test results by analysis of plugging event Due to late availability of welded joints material SCK CEN initiated additional test in flowing conditions that will be reported in the deliverable
The report describes the results of the characterization of the mechanical properties and the microstructure of the reference welds in air
The document contains the plan for the management of the data in GEMMA Project
The report describes the characteristics of the selected most promising AFA alloys
The report describes the as-elaborated sample characteristics
The report is an intermediate summary of the modeling activities and microstructure investigations of the corrosion damage
The report describes the progress of the activities and the results obtained during the second reporting period (MM18-MM36)
The report describes the oxidation and corrosion behaviour of steels in high temperature helium environments simulating GFR conditions
The report contains an assessment of liquid metal corrosion for candidate materials and welds for the LFR reactor. Due to malfunctioning of LECOR loop a substitute facility was employed in October 2020 and 8000 h out of 16000 were lost. The tests in the new facility are progressing at 550°C with oxygen concentration of 10-8 wt.% according to the specifications and will end in October 2021 with a maximum time of exposure of 8000h . To compensate for the reduction in lead exposure time, it is proposed to integrate the data produced by the BID1 facility with the microstructural characterizations of the oxides grown in lead produced by ENEA as part of the JPNM in-kind project MOLECOS. These are microstructural characterizations with RAMAN, TEM, SEM and x-ray diffraction techniques. The data collected evidence a defined behavior in temperature as well thus allowing to establish a temperature regime for safe operations of the austenitic steels in molten lead. accurate characterizations of the oxidation processes of the steels in HLM providing information that can be transferred/extended to the austenitic alloys 316 and 1515-Ti. We believe that the elaboration of the deliverable D4.2 based on the tests in the BID1 facility, the characterizations of the in-kind JPNM MOLECOS and associated with the tests in flowing lead carried out by the project partner CV REZ will provide the expected output for the designers of the lead-cooled systems that originated the experimental program of the GEMMA project
The report describes the results of residual stress simulations, benchmarking and validation
The report contains the proceedings of the workshop dedicated to HLM corrosion and helium damages
The report describes the performance of self-ion-irradiated alumina forming alloys and modified surface layers
The report contains the results on residual stress measurements
The report describes the effects of liquid Pb on mechanical properties of austenitic steels, their welds and implications for design
The report describes the results of the DFT calculations: point defect properties in Ni-Cr system
The report contains the final results on the characterization of the AFA steels
The report describes the results of the mechanical tests in air and inert environment
The report describes the performance of heavy-ion-irradiated Al2O3 coatings
The report provides an overview of the available thermodynamic and structural data for mixed oxides of the steel components with lead and LBE and outline the missing data
The report describes the effect of corrosion mitigation techniques on susceptibility of steels to liquid metal embrittlement
The report describes selected mitigation techniques against liquid metal corrosion in heavy liquid metals
The report contains the final results of the modeling activities and of the microstructure investigations of the corrosion damage
The report describes the kinetic model of Fe-Ni-Cr implemented in the AKMC simulations
The report contains the proceedings of the workshop celebrated on weldings
The report contains the plan for the activities of dissemination of the results of GEMMA
The report describes the erosion of materials in flowing lead and LBE and definition of the liquid metal flow velocity limits
The report provides the quality plan for the Project, including: organisation of the working team; roles and responsibilities of each participant; control actions planned; time schedules; definition of requirement specifications and quality objectives; procedures for acceptance and quality control
The report gives recommendations for residual stress measurements and modelling for component design and safetyintegrity assessments according to RCCMRx
The report outlines the effects of liquid LBE on mechanical properties of austenitic steels their welds and implications for design
The report describes the weld manufacturing technologies for welded components
The report contains the specifications for the preparation of the weld specimens and their characterization
The deliverable is a data catalog listing all the relevant data sets
Searching for OpenAIRE data...
Publications
Author(s): Austin,T.; Bey,K.; Efthymiadis,T.; Koumoulos,E.P.
Published in: Data, 11, 2021, ISSN 2306-5729
Publisher: MDPI
DOI: 10.3390/data6090096
Author(s): Valentyn Tsisar, Erich Stergar, Serguei Gavrilov, Wouter Van Renterghem, Pierre Louette, Stéphane Lucas
Published in: Corrosion Science, 2021, ISSN 0010-938X
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.corsci.2021.109963
Author(s): Jean Bernard Vogt; Ingrid Proriol Serre
Published in: Coatings 11(1) 53-68, 6, 2021, ISSN 2079-6412
Publisher: MDPI
DOI: 10.3390/coatings11010053
Author(s): Maylise Nastar, Lisa T. Belkacemi-Rebrab, Estelle Meslin and Marie Loyer-Prost
Published in: Communication Materials, 2021, ISSN 2662-4443
Publisher: Springer Nature
DOI: 10.1038/s43246-021-00136-z
Author(s): Hao Shi, Adrian Jianu, Alfons Weisenburger, Chongchong Tang, Annette Heinzel, Renate Fetzer, Fabian Lang, Robert Stieglitz, Georg Müller
Published in: Journal of Nuclear Materials, 524, 2019, Page(s) 177-190, ISSN 0022-3115
Publisher: Elsevier BV
DOI: 10.1016/j.jnucmat.2019.06.043
Author(s): Lorenzo Malerba, Pietro Agostini, Marjorie Bertolus, Fabienne Delage, Annelise Gallais-During, Christian Grisolia, Karine Liger, Pierre-François Giroux
Published in: EPJ Nuclear Sciences & Technologies, 6, 2020, Page(s) 32, ISSN 2491-9292
Publisher: EDP science
DOI: 10.1051/epjn/2019021
Author(s): A. Zaborowska, Ł. Kurpaska, E. Wyszkowska, M. Clozel, M. Vanazzi, F. Di Fonzo, M. Turek, I. Jóźwik, A. Kosińska, J. Jagielski
Published in: Surface and Coatings Technology, 386, 2020, Page(s) 125491, ISSN 0257-8972
Publisher: Elsevier BV
DOI: 10.1016/j.surfcoat.2020.125491
Author(s): Anas H. Yaghi, Thomas H. Hyde, Adib A. Becker, Wei Sun, Wu Wen, Gabrielle Hilson, Sarinova Simandjuntak, Peter EJ. Flewitt, Martyn J. Pavier, David J. Smith
Published in: International Journal of Pressure Vessels and Piping, 181, 2020, Page(s) 104076, ISSN 0308-0161
Publisher: Elsevier BV
DOI: 10.1016/j.ijpvp.2020.104076
Author(s): A. Lescur, E. Stergar, J. Lim, S. Hertel, R. H. Petrov
Published in: Materials Characterization, 2021, ISSN 1044-5803
Publisher: Elsevier BV
DOI: 10.1016/j.matchar.2021.111524
Author(s): E. Toijer, L. Messina, J. Vidal, C. Domain, C.S. Becquart, and P. Olsson
Published in: Physical Review Materials, 2021, ISSN 2475-9953
Publisher: American Physical Sociiety
DOI: 10.1103/physrevmaterials.5.013602
Author(s): A. HOJNÁ, P. HALODOVÁ, L. ROZUMOVÁ, F. DI GABRIELE, M. CHOCHOLOUŠEK
Published in: IAEA publication Structural Materials for Heavy Liquid Metal Cooled Fast Reactors., 2019
Publisher: IAEA
Author(s): Alfons Weisenburger, Hao, Shi, Adrian Jianu, Annette Heinzel, Sabina Schlabach, Vinga Szabo, and Georg Müller
Published in: IAEA publication Structural Materials for Heavy Liquid Metal Cooled Fast Reactors., 2020
Publisher: IAEA
Author(s): Peter Dömstedt, Marta Serrano Garcia, Rebeca Hernandez, Peter Szakalos
Published in: AEA publication Structural Materials for Heavy Liquid Metal Cooled Fast Reactors., 2020
Publisher: IAEA
Author(s): M. Vanazzi, B. Paladino, D. Iadicicco, F.G. Ferré, S. Bassini, M. Utili, M. Tarantino, P. Agostini, M.G. Beghi and F. Di Fonzo
Published in: IAEA publication Structural Materials for Heavy Liquid Metal Cooled Fast Reactors., 2020
Publisher: IAEA
Author(s): Zoltán Száraz, Kamil Tuček, Radek Novotný, Karl-Fredrik Nilsson
Published in: IAEA publication Structural Materials for Heavy Liquid Metal Cooled Fast Reactors., 2020
Publisher: IAEA