Leistungen
The report contains the proceedings of the workshop on AFA steels
Proposal for Material Design Curves relevant to HLM conditionsThe report contains a proposal for Material Design Curves relevant to HLM conditions
Proposal for Design Rules and Assessment procedures on the incorporation of environmental effects to RCC-MRx, and related to weldsThe report contains a proposal for Design Rules and Assessment procedures on the incorporation of environmental effects to RCCMRx and related to welds
Report on weld specimen preparation for residual stress measurements and modelling, including experimental data from welded specimens of 316L(N)The report describes the characteristics of the weld specimen preparation for residual stress measurements and modelling, including experimental data from welded specimens of 316L(N)
Intermediated report on optimized process parameters for PLD, gun deposition and surface alloyingThe report describes the optimized process parameters for PLD, gun deposition and surface alloying
Guidelines for qualification of AFA steels, surface alloys and coatingsThe report contains the guidelines for qualification of AFA steels surface alloys and coatings
Final report on coatings and surface alloysThe report contains the final results on coatings and surface alloys
Final ReportThe report describes the activities carried out and the results obtained in GEMMA Project
Proceedings of the workshop on Evolution of austenitic stainless steels and of protective coatings under irradiationThe report contains the proceedings of the workshop on Evolution of austenitic stainless steels and of protective coatings under irradiation
First Activity Progress reportThe report contains the progress of the activities and the results obtained during the first 18 months of the Project
Assessment of liquid metal corrosion for candidate materials and welds of MYRRHA primary circuitThe report contains an assessment of the liquid metal corrosion for candidate materials and welds of MYRRHA primary circuitNote that KIT substituted CORRIDA loop test results by analysis of plugging event Due to late availability of welded joints material SCK CEN initiated additional test in flowing conditions that will be reported in the deliverable
Characterization of mechanical properties and microstructure of reference welds in airThe report describes the results of the characterization of the mechanical properties and the microstructure of the reference welds in air
Data Management PlanThe document contains the plan for the management of the data in GEMMA Project
Report on selection of most promising AFA alloysThe report describes the characteristics of the selected most promising AFA alloys
Report describing as-elaborated sample characteristicsThe report describes the as-elaborated sample characteristics
Modelling and microstructure investigations of the corrosion damage Intermediate ReportThe report is an intermediate summary of the modeling activities and microstructure investigations of the corrosion damage
Second Activity Progress ReportThe report describes the progress of the activities and the results obtained during the second reporting period (MM18-MM36)
Oxidation and corrosion behaviour of steels in high temperature helium environments simulating GFR conditionsThe report describes the oxidation and corrosion behaviour of steels in high temperature helium environments simulating GFR conditions
Assessment of liquid metal corrosion for candidate materials and welds of LFR reactorThe report contains an assessment of liquid metal corrosion for candidate materials and welds for the LFR reactor. Due to malfunctioning of LECOR loop a substitute facility was employed in October 2020 and 8000 h out of 16000 were lost. The tests in the new facility are progressing at 550°C with oxygen concentration of 10-8 wt.% according to the specifications and will end in October 2021 with a maximum time of exposure of 8000h . To compensate for the reduction in lead exposure time, it is proposed to integrate the data produced by the BID1 facility with the microstructural characterizations of the oxides grown in lead produced by ENEA as part of the JPNM in-kind project MOLECOS. These are microstructural characterizations with RAMAN, TEM, SEM and x-ray diffraction techniques. The data collected evidence a defined behavior in temperature as well thus allowing to establish a temperature regime for safe operations of the austenitic steels in molten lead. accurate characterizations of the oxidation processes of the steels in HLM providing information that can be transferred/extended to the austenitic alloys 316 and 1515-Ti. We believe that the elaboration of the deliverable D4.2 based on the tests in the BID1 facility, the characterizations of the in-kind JPNM MOLECOS and associated with the tests in flowing lead carried out by the project partner CV REZ will provide the expected output for the designers of the lead-cooled systems that originated the experimental program of the GEMMA project
Report on residual stress simulations, benchmarking and validationThe report describes the results of residual stress simulations, benchmarking and validation
Proceedings of the workshop on HLM corrosion and helium damagesThe report contains the proceedings of the workshop dedicated to HLM corrosion and helium damages
Report on the performance of self-ion-irradiated alumina forming alloys and modified surface layersThe report describes the performance of self-ion-irradiated alumina forming alloys and modified surface layers
Report on residual stress measurementsThe report contains the results on residual stress measurements
Effect of liquid lead on mechanical properties of austenitic steels, their welds and implications for designThe report describes the effects of liquid Pb on mechanical properties of austenitic steels, their welds and implications for design
DFT calculations: point defect properties in Ni-Cr systemThe report describes the results of the DFT calculations: point defect properties in Ni-Cr system
Final report on AFA steelsThe report contains the final results on the characterization of the AFA steels
Report on mechanical tests in air and inert environmentThe report describes the results of the mechanical tests in air and inert environment
Report on the performance of heavy-ion-irradiated Al2O3 coatingsThe report describes the performance of heavy-ion-irradiated Al2O3 coatings
Overview of the available thermodynamic and structural data for mixed oxides of the steel components with lead and LBE and identification of missing dataThe report provides an overview of the available thermodynamic and structural data for mixed oxides of the steel components with lead and LBE and outline the missing data
Effect of corrosion mitigation techniques on susceptibility of steels to liquid metal embrittlementThe report describes the effect of corrosion mitigation techniques on susceptibility of steels to liquid metal embrittlement
Evaluation of mitigation techniques against liquid metal corrosion in heavy liquid metalsThe report describes selected mitigation techniques against liquid metal corrosion in heavy liquid metals
Modelling and microstructure investigations of the corrosion damage Final ReportThe report contains the final results of the modeling activities and of the microstructure investigations of the corrosion damage
Report or publication on the kinetic model of Fe-Ni-Cr implemented in the AKMC simulationsThe report describes the kinetic model of Fe-Ni-Cr implemented in the AKMC simulations
Proceedings of the workshop on weldingsThe report contains the proceedings of the workshop celebrated on weldings
Dissemination action planThe report contains the plan for the activities of dissemination of the results of GEMMA
Erosion of materials in flowing lead and LBE and definition of the liquid metal flow velocity limitsThe report describes the erosion of materials in flowing lead and LBE and definition of the liquid metal flow velocity limits
Project Quality planThe report provides the quality plan for the Project, including: organisation of the working team; roles and responsibilities of each participant; control actions planned; time schedules; definition of requirement specifications and quality objectives; procedures for acceptance and quality control
Recommendations for residual stress measurements and modelling for component design and safety/integrity assessments according to RCC-MRxThe report gives recommendations for residual stress measurements and modelling for component design and safetyintegrity assessments according to RCCMRx
Effect of liquid LBE on mechanical properties of austenitic steels, their welds and implications for designThe report outlines the effects of liquid LBE on mechanical properties of austenitic steels their welds and implications for design
Weld manufacturing technologies for welded componentsThe report describes the weld manufacturing technologies for welded components
Weld specimen specifications and characterisationsThe report contains the specifications for the preparation of the weld specimens and their characterization
The deliverable is a data catalog listing all the relevant data sets
Veröffentlichungen
Autoren:
Austin,T.; Bey,K.; Efthymiadis,T.; Koumoulos,E.P.
Veröffentlicht in:
Data, Ausgabe 11, 2021, ISSN 2306-5729
Herausgeber:
MDPI
DOI:
10.3390/data6090096
Autoren:
Valentyn Tsisar, Erich Stergar, Serguei Gavrilov, Wouter Van Renterghem, Pierre Louette, Stéphane Lucas
Veröffentlicht in:
Corrosion Science, 2021, ISSN 0010-938X
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.corsci.2021.109963
Autoren:
Jean Bernard Vogt; Ingrid Proriol Serre
Veröffentlicht in:
Coatings 11(1) 53-68, Ausgabe 6, 2021, ISSN 2079-6412
Herausgeber:
MDPI
DOI:
10.3390/coatings11010053
Autoren:
Maylise Nastar, Lisa T. Belkacemi-Rebrab, Estelle Meslin and Marie Loyer-Prost
Veröffentlicht in:
Communication Materials, 2021, ISSN 2662-4443
Herausgeber:
Springer Nature
DOI:
10.1038/s43246-021-00136-z
Autoren:
Hao Shi, Adrian Jianu, Alfons Weisenburger, Chongchong Tang, Annette Heinzel, Renate Fetzer, Fabian Lang, Robert Stieglitz, Georg Müller
Veröffentlicht in:
Journal of Nuclear Materials, Ausgabe 524, 2019, Seite(n) 177-190, ISSN 0022-3115
Herausgeber:
Elsevier BV
DOI:
10.1016/j.jnucmat.2019.06.043
Autoren:
Lorenzo Malerba, Pietro Agostini, Marjorie Bertolus, Fabienne Delage, Annelise Gallais-During, Christian Grisolia, Karine Liger, Pierre-François Giroux
Veröffentlicht in:
EPJ Nuclear Sciences & Technologies, Ausgabe 6, 2020, Seite(n) 32, ISSN 2491-9292
Herausgeber:
EDP science
DOI:
10.1051/epjn/2019021
Autoren:
A. Zaborowska, Ł. Kurpaska, E. Wyszkowska, M. Clozel, M. Vanazzi, F. Di Fonzo, M. Turek, I. Jóźwik, A. Kosińska, J. Jagielski
Veröffentlicht in:
Surface and Coatings Technology, Ausgabe 386, 2020, Seite(n) 125491, ISSN 0257-8972
Herausgeber:
Elsevier BV
DOI:
10.1016/j.surfcoat.2020.125491
Autoren:
Anas H. Yaghi, Thomas H. Hyde, Adib A. Becker, Wei Sun, Wu Wen, Gabrielle Hilson, Sarinova Simandjuntak, Peter EJ. Flewitt, Martyn J. Pavier, David J. Smith
Veröffentlicht in:
International Journal of Pressure Vessels and Piping, Ausgabe 181, 2020, Seite(n) 104076, ISSN 0308-0161
Herausgeber:
Elsevier BV
DOI:
10.1016/j.ijpvp.2020.104076
Autoren:
A. Lescur, E. Stergar, J. Lim, S. Hertel, R. H. Petrov
Veröffentlicht in:
Materials Characterization, 2021, ISSN 1044-5803
Herausgeber:
Elsevier BV
DOI:
10.1016/j.matchar.2021.111524
Autoren:
E. Toijer, L. Messina, J. Vidal, C. Domain, C.S. Becquart, and P. Olsson
Veröffentlicht in:
Physical Review Materials, 2021, ISSN 2475-9953
Herausgeber:
American Physical Sociiety
DOI:
10.1103/physrevmaterials.5.013602
Autoren:
A. HOJNÁ, P. HALODOVÁ, L. ROZUMOVÁ, F. DI GABRIELE, M. CHOCHOLOUŠEK
Veröffentlicht in:
IAEA publication Structural Materials for Heavy Liquid Metal Cooled Fast Reactors., 2019
Herausgeber:
IAEA
Autoren:
Alfons Weisenburger, Hao, Shi, Adrian Jianu, Annette Heinzel, Sabina Schlabach, Vinga Szabo, and Georg Müller
Veröffentlicht in:
IAEA publication Structural Materials for Heavy Liquid Metal Cooled Fast Reactors., 2020
Herausgeber:
IAEA
Autoren:
Peter Dömstedt, Marta Serrano Garcia, Rebeca Hernandez, Peter Szakalos
Veröffentlicht in:
AEA publication Structural Materials for Heavy Liquid Metal Cooled Fast Reactors., 2020
Herausgeber:
IAEA
Autoren:
M. Vanazzi, B. Paladino, D. Iadicicco, F.G. Ferré, S. Bassini, M. Utili, M. Tarantino, P. Agostini, M.G. Beghi and F. Di Fonzo
Veröffentlicht in:
IAEA publication Structural Materials for Heavy Liquid Metal Cooled Fast Reactors., 2020
Herausgeber:
IAEA
Autoren:
Zoltán Száraz, Kamil Tuček, Radek Novotný, Karl-Fredrik Nilsson
Veröffentlicht in:
IAEA publication Structural Materials for Heavy Liquid Metal Cooled Fast Reactors., 2020
Herausgeber:
IAEA
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor