Skip to main content

Open characterisation and modelling environment to drive innovation in advanced nano-architected and bio-inspired hard/soft interfaces

Deliverables

The OYSTER CWA

The final version of the OYSTER CENCENELEC CWA document on Materials characterisation Terminology classification and metadata

Report on multi-scale simulations

Report on multiscale simulations

Definition and publication of the main user-story (workflow) to be used by industry to access the OIE

Definition and publication of the main user-story (workflow) to be used by industry to access the OIE

Cataloguing and protocols regarding experiments, process optimisation and model validation including standardisation of protocols interpretation

Cataloguing and protocols regarding experiments, process optimisation and model validation including standardisation of protocols interpretation

Taxonomy and metadata for nanoscale mechanical characterization

Taxonomy and metadata for nanoscale mechanical characterization

Open-day dissemination workshop

Open-day dissemination workshop

End of project open-day dissemination workshop

End of project openday dissemination workshop

Preliminary Communication and Dissemination Plan

Preliminary Communication and Dissemination Plan

Examples of Open Innovation exploitation and testing (in cooperation with industry partners)

Examples of Open Innovation exploitation and testing in cooperation with industry partners

Interlaboratory activities for establishment and validation of nanoindentation and AFM protocols

Interlaboratory activities for establishment and validation of nanoindentation and AFM protocols

Setting up the OIE and integrating services

Fraunhofer (with support of NTUA, IRES and UNIROMA3) determines and report the OIE technical specifications, in terms of hardware and software components to provide the best experience for both end users and developers in terms of ease of access, robustness, long-term maintainability, and sustainability.

Presentation of Open Innovation Environment (OIE) infrastructure and input to EMCC

Presentation of Open Innovation Environment (OIE) infrastructure and input to EMCC

OYSTER EMMO for nano-scale mechanical characterization

OYSTER European Materials Modelling Ontology (EMMO) for nano-scale mechanical characterization

Project logo, leaflet and website

Project logo, leaflet and website

Searching for OpenAIRE data...

Publications

Printed asymmetric microcapsules: Facile loading and multiple stimuli-responsiveness

Author(s): Kudryavtseva, V. Bukatin, A. Vyacheslavova, E. Gould, D. Sukhorukov, G. B.
Published in: Biomaterials Advances, 27729508, 2022, ISSN 2772-9508
Publisher: Elsevier
DOI: 10.1016/j.bioadv.2022.212762

Effect of annealing on mechanical properties and thermal stability of ZrCu/O nanocomposite amorphous films synthetized by pulsed laser deposition

Author(s): Bignoli, Francesco Rashid, Saqib Rossi, Edoardo Jaddi, Sahar Djemia, Philippe Terraneo, Giancarlo Li Bassi, Andrea Idrissi, Hosni Pardoen, Thomas Sebastiani, Marco Ghidelli, Matteo
Published in: Materials & Design, 02641275, 2022, Page(s) 110972, ISSN 0264-1275
Publisher: Elsevier BV
DOI: 10.1016/j.matdes.2022.110972

Study of ALDH from Thermus thermophilus—Expression, Purification and Characterisation of the Non-Substrate Specific, Thermophilic Enzyme Displaying Both Dehydrogenase and Esterase Activity

Author(s): Shortall, Kim Durack, Edel Magner, Edmond Soulimane, Tewfik
Published in: cells, 20734409, 2021, Page(s) 3535, ISSN 2073-4409
Publisher: MDPI
DOI: 10.3390/cells10123535

Nonlinear elastic constitutive modeling of α -Ge

Author(s): D. Sfyris, D.A. Dragatogiannis, C. Charitidis
Published in: International Journal of Non-Linear Mechanics, 134, 2021, Page(s) 103737, ISSN 0020-7462
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.ijnonlinmec.2021.103737

Expression, Purification, and in vitro Enzyme Activity Assay of a Recombinant Aldehyde Dehydrogenase from Thermus thermophilus, using an Escherichia coli host

Author(s): Shortall, Kim Magner, Edmond Soulimane, Tewfik
Published in: Bio-protocol, 23318325, 2022, Page(s) e4401, ISSN 2331-8325
Publisher: Bio-protocol LLC.
DOI: 10.21769/bioprotoc.4401

Patterned drug-eluting coatings for tracheal stents based on pla, plga, and pcl for the granulation formation reduction: In vivo studies

Author(s): Sindeeva O.A., Prikhozhdenko E.S., Schurov I., Sedykh N., Goriainov S., Karamyan A., Mordovina E.A., Inozemtseva O.A., Kudryavtseva V., Shchesnyak L.E., Abramovich R.A., Mikhajlov S., Sukhorukov G.B.
Published in: Pharmaceutics, 19994923, 2021, Page(s) 1437, ISSN 1999-4923
Publisher: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/pharmaceutics13091437

A novel nanoindentation protocol to characterize surface free energy of superhydrophobic nanopatterned materials

Author(s): E. M. Rossi, P. Sudharshan Phani, R. Guillemet, Julie Cholet, Doriane Jussey, W. C. Oliver, M. Sebastiani
Published in: Journal of Materials Research, 2021, ISSN 0884-2914
Publisher: Materials Research Society
DOI: 10.1557/s43578-021-00127-3

Biocompatibility and antibacterial properties of TiCu(Ag) thin films produced by physical vapor deposition magnetron sputtering

Author(s): Rashid S., Vita G.M., Persichetti L., Iucci G., Battocchio C., Daniel R., Visaggio D., Marsotto M., Visca P., Bemporad E., Ascenzi P., Capellini G., Sebastiani M., di Masi A.
Published in: Applied Surface Science, 01694332, 2022, ISSN 0169-4332
Publisher: Elsevier BV
DOI: 10.1016/j.apsusc.2021.151604

"Micro-sized ""pelmeni"" - A universal microencapsulation approach overview"

Author(s): Valeriya Kudryavtseva, Stefania Boi, Jordan Read, David Gould, Piotr K. Szewczyk, Urszula Stachewicz, Maxim V. Kiryukhin, Laura Pastorino, Gleb B. Sukhorukov
Published in: Materials & Design, 202, 2021, Page(s) 109527, ISSN 0264-1275
Publisher: Elsevier BV
DOI: 10.1016/j.matdes.2021.109527

Quantifying residual stress in Helium-implanted surfaces and its implication for blistering

Author(s): P. Hosemann, M. Sebastiani, M. Z. Mughal, X. Huang, A. Scott, M. Balooch
Published in: Journal of Materials Research, 2021, ISSN 0884-2914
Publisher: Materials Research Society
DOI: 10.1557/s43578-021-00108-6

Quantitative multi-scale characterization of single basalt fibres: Insights into strength loss mechanisms after thermal conditioning

Author(s): Matteo Lilli, Edoardo Rossi, Jacopo Tirillò, Fabrizio Sarasini, Lorenzo Di Fausto, Teodoro Valente, Carlos González, Andrea Fernández, Cláudio Saúl Lopes, Riccardo Moscatelli, Edoardo Bemporad, Marco Sebastiani
Published in: Materials Science and Engineering: A, 797, 2020, Page(s) 139963, ISSN 0921-5093
Publisher: Elsevier BV
DOI: 10.1016/j.msea.2020.139963

Humidity-dependent flaw sensitivity in the crack propagation resistance of 3D-printed nano-ceramics

Author(s): Edoardo Rossi, Jens Bauer, Marco Sebastiani
Published in: Scripta Materialia, 194, 2021, Page(s) 113684, ISSN 1359-6462
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2020.113684

Wettability of soft PLGA surfaces predicted by experimentally augmented atomistic models

Author(s): Bellussi, Francesco Maria Roscioni, Otello Maria Rossi, Edoardo Cardellini, Annalisa Provenzano, Marina Persichetti, Luca Kudryavtseva, Valeriya Sukhorukov, Gleb Asinari, Pietro Sebastiani, Marco Fasano, Matteo
Published in: MRS Bulletin, 08837694, 2022, ISSN 0883-7694
Publisher: Materials Research Society
DOI: 10.1557/s43577-022-00380-9

Ni-B electrodeposits with low B content: Effect of DMAB concentration on the internal stresses and the electrochemical behaviour

Author(s): M. Lekka, R. Offoiach, A. Lanzutti, M.Z. Mughal, M. Sebastiani, E. Bemporad, L. Fedrizzi
Published in: Surface and Coatings Technology, 344, 2018, Page(s) 190-196, ISSN 0257-8972
Publisher: Elsevier BV
DOI: 10.1016/j.surfcoat.2018.03.018

Effects of Residual Stress Distribution on Interfacial Adhesion of Magnetron Sputtered AlN and AlN/Al Nanostructured Coatings on a (100) Silicon Substrate

Author(s): Rashid Ali, Marco Renzelli, M. Khan, Marco Sebastiani, Edoardo Bemporad
Published in: Nanomaterials, 8/11, 2018, Page(s) 896, ISSN 2079-4991
Publisher: MDPI
DOI: 10.3390/nano8110896

Review Article: Stress in thin films and coatings: Current status, challenges, and prospects

Author(s): Grégory Abadias, Eric Chason, Jozef Keckes, Marco Sebastiani, Gregory B. Thompson, Etienne Barthel, Gary L. Doll, Conal E. Murray, Chris H. Stoessel, Ludvik Martinu
Published in: Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 36/2, 2018, Page(s) 020801, ISSN 0734-2101
Publisher: American Institute of Physics
DOI: 10.1116/1.5011790

Innovative Data Management in advanced characterization: implications for materials design

Author(s): N. Romanos, M. Kalogerini, E.P. Koumoulos, A.K. Morozinis, M. Sebastiani, C. Charitidis
Published in: Materials Today Communications, 2019, ISSN 2352-4928
Publisher: Elsevier BV
DOI: 10.1016/j.mtcomm.2019.100541

A review of experimental approaches to fracture toughness evaluation at the micro-scale

Author(s): J. Ast, M. Ghidelli, K. Durst, M. Göken, M. Sebastiani, A.M. Korsunsky
Published in: Materials & Design, 173, 2019, Page(s) 107762, ISSN 0264-1275
Publisher: Elsevier BV
DOI: 10.1016/j.matdes.2019.107762

Nano-Scale Residual Stress Profiling in Thin Multilayer Films with Non-Equibiaxial Stress State

Author(s): Marco Sebastiani, Edoardo Rossi, Muhammad Zeeshan Mughal, Alessandro Benedetto, Paul Jacquet, Enrico Salvati, Alexander M. Korsunsky
Published in: Nanomaterials, 10/5, 2020, Page(s) 853, ISSN 2079-4991
Publisher: MDPI
DOI: 10.3390/nano10050853

A Nanoindentation Approach for Time-Dependent Evaluation of Surface Free Energy in Micro-and Nano-Structured Titanium

Author(s): De Santis S., Rossi E., Sebastiani M., Sennato S., Bemporad E., Orsini M.
Published in: Materials, 15/1, 2022, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma15010287

Fracture toughness of radiation-damaged zircon studied by nanoindentation pillar-splitting

Author(s): Tobias Beirau; Edoardo Rossi; Marco Sebastiani; Warren C. Oliver; Herbert Pöllmann; Rodney C. Ewing
Published in: Applied Physics Letters, 3, 2021, ISSN 0003-6951
Publisher: American Institute of Physics
DOI: 10.1063/5.0070597

Integrated molecular dynamics and experimental approach to characterize low-free-energy perfluoro-decyl-acrylate (PFDA) coated silicon

Author(s): Annalisa Cardellini, Francesco Maria Bellussi, Edoardo Rossi, Lorenzo Chiavarini, Claude Becker, David Cant, Pietro Asinari, Marco Sebastiani
Published in: Materials & Design, 208, 2021, Page(s) 109902, ISSN 0264-1275
Publisher: Elsevier BV
DOI: 10.1016/j.matdes.2021.109902

Insights into Aldehyde Dehydrogenase Enzymes: A Structural Perspective.

Author(s): Kim Shortall; Ahmed Djeghader; Edmond Magner; Tewfik Soulimane
Published in: Frontiers in Molecular Biosciences, Vol 8 (2021), 6, 2021, ISSN 2296-889X
Publisher: Frontiers Media S.A.
DOI: 10.3389/fmolb.2021.659550

Lessons Learnt from Engineering Science Projects Participating in the Horizon 2020 Open Research Data Pilot

Author(s): Austin, Timothy Bei, Kyriaki Efthymiadis, Theodoros Koumoulos, Elias P.
Published in: Data, 23065729, 2021, Page(s) 96, ISSN 2306-5729
Publisher: MDPI
DOI: 10.3390/data6090096

Anisotropic Electrostatic Interactions in Coarse-Grained Water Models to Enhance the Accuracy and Speed-Up Factor of Mesoscopic Simulations.

Author(s): Francesco Maria Bellussi; Otello Maria Roscioni; Matteo Ricci; Matteo Fasano
Published in: The Journal of Physical Chemistry. B, 15206106, 2021, Page(s) 12020 - 12027, ISSN 1520-6106
Publisher: American Chemical Society
DOI: 10.1021/acs.jpcb.1c07642

Biodegradable Defined Shaped Printed Polymer Microcapsules for Drug Delivery

Author(s): Valeriya Kudryavtseva, Stefania Boi, Jordan Read, Raphael Guillemet, Jiaxin Zhang, Andrei Udalov, Evgeny Shesterikov, Sergei Tverdokhlebov, Laura Pastorino, David J. Gould, Gleb B. Sukhorukov
Published in: ACS Applied Materials & Interfaces, 13/2, 2021, Page(s) 2371-2381, ISSN 1944-8244
Publisher: American Chemical Society
DOI: 10.1021/acsami.0c21607

Influence of the Silver Content on Mechanical Properties of Ti-Cu-Ag Thin Films

Author(s): Saqib Rashid, Marco Sebastiani, Muhammad Mughal, Rostislav Daniel, Edoardo Bemporad
Published in: Nanomaterials, 11/2, 2021, Page(s) 435, ISSN 2079-4991
Publisher: MDPI
DOI: 10.3390/nano11020435

Open Innovation Environments and their Importance in Materials Modelling and Materials Characterisation

Author(s): Goldbeck, Gerhard; Simperler, Alexandra; Boskovic, Bojan; Aleksic, Jelena
Published in: 2022
Publisher: Zenodo
DOI: 10.5281/zenodo.6363436

Report on Advanced materials modelling and characterisation: strategies for integration and interoperability

Author(s): Adamovic, Nadja; Boskovic, Bojan; Celuch, Małgorzata; Charitidis, Costas; Friis, Jesper; Goldbeck, Gerhard; Hashibon, Adham; Hurtós, Esther; Sebastiani, Marco; Simperler, Alexandra
Published in: Zenodo OYSTER community, 2021
Publisher: Zenodo
DOI: 10.5281/zenodo.4912682

OYSTER project: examples of MODA/CHADA integration

Author(s): Sebastiani, Marco; Fasano, Matteo
Published in: Zenodo OYSTER community, 2021
Publisher: Zenodo
DOI: 10.5281/zenodo.4980554

Data Management Plan template for H2020 projects

Author(s): Elias P. Koumoulos; Marco Sebastiani; Nikolaos Romanos; Maritini Kalogerini; Costas Charitidis
Published in: Zenodo OYSTER community, 2019
Publisher: Zenodo

CHADA docx detailed forms

Author(s): Marco Sebastiani, Costas Charitidis, Elias P. Koumoulos
Published in: Zenodo OYSTER community, 2019
Publisher: Zenodo
DOI: 10.5281/zenodo.2637419

Data Management Plan with CHADA workflow sheet embedded

Author(s): Elias Koumoulos; Marco Sebastiani; Nikolaos Romanos; Maritini Kalogerini; Costas Charitidis
Published in: Zenodo OYSTER community, 2019
Publisher: Zenodo

Main Introduction to the CHADA concept and case studies

Author(s): Marco Sebastiani, Costas Charitidis, Elias P. Koumoulos
Published in: Zenodo OYSTER community, 2019
Publisher: Zenodo
DOI: 10.5281/zenodo.2636609

Piezoresponse force microscopy and electron backscattering diffraction of 90° ferroelectric twins in BaTiO3 positive temperature coefficient (PTC) thermistors

Author(s): Tofail, S. A. M. Karimi-Jafari, M. Stapleton, A. Guo, Y. Kowal, K. Chovan, D. Kailas, L. Gandhi, A. O’Sullivan, K. Maher, A. Silien, C. Ul-Haq, E.
Published in: "3rd International Conference ""Scanning Probe Microscopy""", 2019, ISBN 978-5-9500624-2-1
Publisher: Ural Federal University

MODA and CHADA; challenges and opportunities for integration and exploitation to industrial stakeholders beyond EU projects.

Author(s): Adamovic, Nadja; Goldbeck, Gerhard; Celuch, Malgorzata
Published in: 7, 2021
Publisher: Zenodo
DOI: 10.5281/zenodo.5784379