Performance Untapped Modulation for Power and Heat via Energy Accumulation Technologies

Información del proyecto

PUMP-HEAT

Identificador del acuerdo de subvención: 764706

DOI

10.3030/764706

Proyecto cerrado

Fecha de la firma de la CE 8 Agosto 2017

Fecha de inicio 1 Septiembre 2017

Fecha de finalización 31 Diciembre 2021

Financiado con arreglo a

• SOCIETAL CHALLENGES - Secure, clean and efficient energy

Coste total

€ 5 904 426,25

Aportación de la UE

€ 5 904 426,25

Coordinado por

UNIVERSITA DEGLI STUDI DI GENOVA
Italy

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Demonstrators, pilots, prototypes (2)

Thermal storage prototypes to demosite and to validation sites

Delivery of thermal storage prototypes at the relevant sites for technology validation and demonstrationTask 3233

Components for PHCC demosite and microturbine validation site

Delivery of prototypes to IREN demosite and UNIGE validation siteTask 21222324

Documents, reports (15)

Validated thermo-economic models

Thermoeconomic model validation of PHCC technology basing on the monitored data from the validation and demonstration sitesTask 13

Requirements for thermal storage in PHCC applications

Critical analysis of thermal storage role and requirements within the PHCC layout options. Task 3.1

Grid-compliant control architecture and controller real-time objective function

PHCC control system architecture to comply with European grid requirements and to ensure the optimal management of the PHCC system in real-time. Task 4.1

Validated dynamic model of PHCC demosite

Results of PHCC dynamic model validation basing on IREN demosite monitored dataTask 42

Validation results in MiL and HiL of MPC

Model Predictive Control system validated in model in the loop and hardware in the loop configurationsTask 44

First Stakeholders’ vision document

First report from the Stakeholder group with their vision for PHCC technology opportunities and roadmap. Task 6.5

Second Stakeholders' vision document

Second report from the Stakeholder group with their vision for PHCC technology opportunities and roadmapTask 65

Assessment of different options for thermal storage in PHCCs

Assessment of technologies and materials for thermal storage in PHCC systems depending on the different layout options. Task 3.2, 3.3

Technological and Commercial Roadmap

Roadmap for future development of PHCC technology till TRL9Task 63

Validation results of warm (70-80°C) temperature thermal storage

Monitored data from the KTH validation site on thermal storage performance and thermal cyclesTask 33

Techno-economic requirements for PHCC replication across Europe

Requirements for PHCC deployment in various EU countries including specific opportunitiesissuesTask 61

Final report on demosite operation

Final report of results achieved and lessons learnt from the demosite operationTask 53

Report on final construction of demosite

Report on IREN demosite construction including operational guidelines and operational requirementsTask 52

Validation results in Energy-Hub of MPC with cold thermal storage

Validation results from the UNIGE validation site basing on the monitored data of actual operationTask 45

PHCC business models

Buisnness model options for PHCC technology adoption across Europe considering countryspecific requirements as well as user demand scenariosTask 14

Websites, patent fillings, videos etc. (4)

Leaflet and poster on the project

Dissemination material Task 6.4

Public website set-up:

Project website. Task 6.4

Dissemination Plan:

Detailed plan of dissemination activities. Task 6.4

E-book on guidelines for PHCC replication across Europe covering technical, economic, legislative, social and environmental aspects

Dissemination materialTask 61

Publicaciones

Peer reviewed articles (12)

Performance Assessment of Bladeless Micro-Expanders Using 3D Numerical Simulation

Autores: Avinash Renuke; Alberto Traverso; Matteo Pascenti
Publicado en: E3S Web of Conferences, Vol 113, p 03016 (2019), Edición 22671242, 2019, ISSN 2267-1242
Editor: E3S Web of Conferences
DOI: 10.1051/e3sconf/201911303016

Heat recovery from Combined Cycle Power Plants for Heat Pumps

Autores: Alberto Vannoni; Alessandro Sorce; Sven Bosser; Torsten Buddenberg
Publicado en: E3S Web of Conferences, Vol 113, Edición 22671242, 2019, ISSN 2267-1242
Editor: E3S Web of Conferences
DOI: 10.1051/e3sconf/201911301011

Experimental Campaign Tests on a Tesla Micro-Expanders

Autores: Avinash Renuke; Alberto Traverso; Matteo Pascenti
Publicado en: E3S Web of Conferences, Vol 113, Edición 22671242, 2019, ISSN 2267-1242
Editor: E3S Web of Conferences
DOI: 10.1051/e3sconf/201911303015

Two-phase flow expansion: development of an innovative test-rig for flow characterisation and CFD validation

Autores: Alberto Traverso; Federico Reggio; Paolo Silvestri; Sergio Rizzo; Geoff Engelbrecht; Alexandros Chasoglou
Publicado en: E3S Web of Conferences, Vol 113, Edición 22671242, 2019, ISSN 2267-1242
Editor: E3S Web of Conferences
DOI: 10.1051/e3sconf/201911303017

Dynamic simulation of a combined cycle for power plant flexibility enhancement

Autores: Adrien Reveillere; Martin Longeon; Iacopo Rossi
Publicado en: E3S Web of Conferences, Vol 113, p 01005 (2019), Edición 22671242, 2019, ISSN 2267-1242
Editor: E3S Web of Conferences
DOI: 10.1051/e3sconf/201911301005

AMBIENT TEMPERATURE IMPACT ON MICRO GAS TURBINES: EXPERIMENTAL CHARACTERIZATION

Autores: Iacopo Rossi, Alberto Traverso
Publicado en: Acta Polytechnica CTU Proceedings, Edición 20, 2018, Página(s) 78-85, ISSN 2336-5382
Editor: Acta Polytechnica CTU Proceedings
DOI: 10.14311/app.2018.20.0078

Development and installation of control system for a test rig interconnecting a micro Gas Turbine, a Heat Pump and a PCM Storage system

Autores: Iacopo Rossi; Romain Caillere
Publicado en: E3S Web of Conferences, Vol 113, p 01003 (2019), Edición 22671242, 2019, ISSN 2267-1242
Editor: E3S Web of Conferences
DOI: 10.1051/e3sconf/201911301003

Experimental analysis of submerged coil and encapsulated slab latent heat storage

Autores: Ming-Hsuan Hu; Tianhao Xu; Justin NW. Chiu
Publicado en: Applied Thermal Engineering, Edición 13594311, 2022, ISSN 1359-4311
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.applthermaleng.2022.118259

Flexibilization of Gas Turbine Combined Cycle via Heat Pump: development of control logics via Software-in-the-loop application

Autores: Iacopo Rossi; Adrien Reveillere; Alberto Traverso
Publicado en: E3S Web of Conferences, Vol 113, Edición 22671242, 2019, ISSN 2267-1242
Editor: E3S Web of Conferences
DOI: 10.1051/e3sconf/201911301004

Dynamic modeling and simulation of a heat pump system for enhancing cycle flexibility

Autores: Yutaka Watanabe; Alberto Traverso
Publicado en: E3S Web of Conferences, Vol 113, p 01007 (2019), Edición 22671242, 2019, ISSN 2267-1242
Editor: E3S Web of Conferences
DOI: 10.1051/e3sconf/201911301007

Development of a new test rig for the analysis of hydrodynamic bearings for rotors of microGT

Autores: Carlo Alberto Niccolini Marmont Du Haut Champ; Fabrizio Stefani; Paolo Silvestri
Publicado en: E3S Web of Conferences, Vol 113, Edición 22671242, 2019, ISSN 2267-1242
Editor: E3S Web of Conferences
DOI: 10.1051/e3sconf/201911303002

Market opportunities for small energy harvesters

Autores: Alessandra Cuneo; Stefano Barberis; Alberto Traverso; Paolo Silvestri
Publicado en: E3S Web of Conferences, Vol 113, p 03010 (2019), Edición 22671242, 2019, ISSN 2267-1242
Editor: E3S Web of Conferences
DOI: 10.1051/e3sconf/201911303010

Conference proceedings (3)

Thermal Energy Storage for Gas Turbine Power Augmentation

Autores: Vasilis Gkoutzamanis, Anastasia Chatziangelidou, Theofilos Efstathiadis, Anestis Kalfas, Alberto Traverso, Justin Chiu
Publicado en: GPPS Proceedings GPPS Zurich19, 2019
Editor: Global Power and Propulsion (GPPS) Society
DOI: 10.33737/gpps19-tc-072

CFD analysis of a Tesla turboexpander using single phase steam

Autores: Ntatsis K., Chatziangelidou A., Efstathiadis T., Gkoutzamanis V., Silvestri P., and Kalfas A.,
Publicado en: 2019
Editor: Global Power and Propulsion (GPPS) Society

Techno-Economic Analysis of Power-to-Heat Systems

Autores: Alberto Vannoni, Alessandro Sorce, Alberto Traverso and Aristide Fausto Massardo
Publicado en: E3S Web Conf. Volume 238, 2021, Edición 22671242, 2021, ISSN 2267-1242
Editor: E3S Web of Conferences
DOI: 10.1051/e3sconf/202123803003