A Training Network on Designing Novel Bio-based Fibre Products for Targeted Advanced Properties and New Applications

Livrables

Project web site up and running. The web site will provide information for different target groups from project members to general public.

Online platform ready and running

Online platform for networking purposes (outside the project) up and running.

Educational parts of the online platform ready

Those parts of the online platform that are related to educational issues are implemented.

2nd network-wide training event

Second network-wide training event (1st S/W school). Topic: : Multi-scale characterization of bio-based fibre products. Responsibilities of the lead beneficiary divided between TU GRAZ and UM.

1st network-wide training event

Kick-off seminar. First of the network-wide training events.

5th network-wide training event

Fifth networkwide training event 4th SW school Topic Applications and manufacturing processes of biobased fibre products

6th network-wide training event

6th networkwide training event Topic Promoting the results of the project in connection with an established conference Responsibilities of lead beneficiary divided between UNIVERSITEIT MAASTRICHT and KU Leuven

3rd network-wide training event

Third network-wide training event (2nd S/W school). Topic: Surface functionalization of bio-based fibre products. Responsibilities of the lead beneficiary divided between TU GRAZ and UM.

4th network-wide training event

Fourth networkwide training event 3rd SW school Topic Multiphysics modelling of biobased fibre products

Curricula recommendation ready

Curricula recommendation ready for PhD training in the field of biobased fibres

Publications

Mind the Pulp: Environmental and economic assessment of a sugar beet pulp biorefinery for biobased chemical production

Auteurs: García-Velásquez, C., van der Meer, Y.
Publié dans: Waste Management, 2023, ISSN 0956-053X
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.wasman.2022.10.038

Succinylation of Polyallylamine: Influence on Biological Efficacy and the Formation of Electrospun Fibers

Auteurs: Jurko Lucija; Bračič Matej; Hribernik Silvo; Makuc Damjan; Plavec Janez; Jerenec Filip; Žabkar Sonja; Gubeljak Nenad; Štern Alja; Kargl Rupert
Publié dans: Polymers, Numéro 4, 2021, ISSN 2073-4360
Éditeur: MPDI
DOI: 10.3390/polym13172840

Can we improve the environmental benefits of biobased PET production through local 1 biomass value chains? A life cycle assessment perspective

Auteurs: Garcia-Velasquez, Carlos; van der Meer, Yvonne
Publié dans: Journal of Cleaner Production, Numéro 380, 2022, ISSN 0959-6526
Éditeur: Elsevier BV
DOI: 10.1016/j.jclepro.2022.135039

Microscale sensor solution for data collection from fibre-matrix interfaces

Auteurs: Royson Dsouza, Paulo Antunes, Markus Kakkonen, Olli Tanhuanpää, Pekka Laurikainen, Farzin Javanshour, Pasi Kallio, Mikko Kanerva
Publié dans: Scientific Reports, Numéro 11/1, 2021, Page(s) 1-12, ISSN 2045-2322
Éditeur: Nature Publishing Group
DOI: 10.1038/s41598-021-87723-9

Cellulose-hemicellulose interactions - A nanoscale view

Auteurs: Ali Khodayari, Wim Thielemans, Ulrich Hirn, Aart W. Van Vuure, David Seveno
Publié dans: Carbohydrate Polymers, Numéro 270, 2021, Page(s) 118364, ISSN 0144-8617
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.carbpol.2021.118364

Recrystallization and size distribution of dislocated segments in cellulose microfibrils—a molecular dynamics perspective

Auteurs: Ali Khodayari, Ulrich Hirn, Stefan Spirk, Aart W. Van Vuure, David Seveno
Publié dans: Cellulose, Numéro 166, 2021, ISSN 0969-0239
Éditeur: Blackie Academic & Professional
DOI: 10.1007/s10570-021-03906-7

Adsorption of paper strength additives to hardwood fibres with different surface charges and their effect on paper strength

Auteurs: Mengxiao Zhao; Leif Robertsén; Lars Wågberg; Torbjörn Pettersson
Publié dans: Cellulose, Numéro 7, 2022, ISSN 0969-0239
Éditeur: Blackie Academic & Professional
DOI: 10.1007/s10570-022-04447-3

Quantification and Imaging of Nanoscale Contact with Förster Resonance Energy Transfer

Auteurs: Mónica G. Simões, Georg Urstöger, Robert Schennach, Ulrich Hirn
Publié dans: ACS Applied Materials & Interfaces, Numéro 13/16, 2021, Page(s) 19521-19529, ISSN 1944-8244
Éditeur: American Chemical Society
DOI: 10.1021/acsami.1c04226

Modulating impact resistance of flax epoxy composites with thermoplastic interfacial toughening

Auteurs: F. Javanshour, A. Prapavesis, T. Pärnänen, O. Orell, M.C. Lessa Belone, R.K. Layek, M. Kanerva, P. Kallio, A.W. Van Vuure, E. Sarlin
Publié dans: Composites Part A: Applied Science and Manufacturing, Numéro 150, 2021, Page(s) 106628, ISSN 1359-835X
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2021.106628

Modeling multi-fracturing fibers in fiber networks using elastoplastic Timoshenko beam finite elements with embedded strong discontinuities — Formulation and staggered algorithm

Auteurs: Vedad Tojaga, Artem Kulachenko, Sören Östlund, T. Christian Gasser
Publié dans: Computer Methods in Applied Mechanics and Engineering, 2021, ISSN 0045-7825
Éditeur: Elsevier BV
DOI: 10.1016/j.cma.2021.113964

Back calculated compressive properties of flax fibers utilizing the Impregnated Fiber Bundle Test (IFBT)

Auteurs: Alexandros Prapavesis, Vedad Tojaga, Sören Östlund, Aart Willem van Vuure
Publié dans: Composites Part A: Applied Science and Manufacturing, Numéro 135, 2020, Page(s) 105930, ISSN 1359-835X
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.105930

Comparative life cycle assessment of the biochemical and thermochemical production routes of biobased terephthalic acid using Miscanthus in the Netherlands

Auteurs: Gian, M., García-Velásquez, C., van der Meer, Y.
Publié dans: Cleaner Environmental Systems, Numéro 6, 2022, ISSN 2666-7894
Éditeur: Elsevier
DOI: 10.1016/j.cesys.2022.100085

Inverse rule of mixtures at the nanoscale: Prediction of elastic properties of cellulose nanofibrils

Auteurs: Ali Khodayari, Ulrich Hirn, Aart W. Van Vuure, David Seveno
Publié dans: Composites Part A: Applied Science and Manufacturing, Numéro 138, 2020, Page(s) 106046, ISSN 1359-835X
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.106046

Organic acid cross-linked 3D printed cellulose nanocomposite bioscaffolds with controlled porosity, mechanical strength, and biocompatibility

Auteurs: Dobaj-Stiglic, A., Gurer, F., Lackner, F., Bracic, D., Winter, A., Gradisnik, L., Makuc, D., Kargl, R., Duarte, I., Plavec, J., Beaumont, M., Stana-Kleinschek, K., Mohan, T.
Publié dans: iScience, Numéro 5, 2022, ISSN 2589-0042
Éditeur: Elsevier
DOI: 10.1016/j.isci.2022.104263

Effect of graphene oxide surface treatment on the interfacial adhesion and the tensile performance of flax epoxy composites

Auteurs: F. Javanshour, KR. Ramakrishnan, R.K. Layek, P. Laurikainen, A. Prapavesis, M. Kanerva, P. Kallio, A.W. Van Vuure, E. Sarlin
Publié dans: Composites Part A: Applied Science and Manufacturing, Numéro 142, 2021, Page(s) 106270, ISSN 1359-835X
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.106270

Water-based carbodiimide mediated synthesis of polysaccharide-amino acid conjugates: Deprotection, charge and structural analysis

Auteurs: Fazilet Gürer, Rupert Kargl, Matej Bračič, Damjan Makuc, Martin Thonhofer, Janez Plavec, Tamilselvan Mohan, Karin Stana Kleinschek
Publié dans: Carbohydrate Polymers, Numéro 267, 2021, Page(s) 118226, ISSN 0144-8617
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.carbpol.2021.118226

The influence of structural variations on the constitutive response and strain variations in thin fibrous materials

Auteurs: Mossab Alzweighi, Rami Mansour, Jussi Lahti, Ulrich Hirn, Artem Kulachenko
Publié dans: Acta Materialia, 2021, ISSN 1359-6454
Éditeur: Elsevier BV
DOI: 10.1016/j.actamat.2020.11.003

Effect of Cellulose Characteristics on the Properties of the Wet-Spun Aerogel Fibers

Auteurs: Matin Rostamitabar, Gunnar Seide, Stefan Jockenhoevel, Samaneh Ghazanfari
Publié dans: Applied Sciences, Numéro 11/4, 2021, Page(s) 1525, ISSN 2076-3417
Éditeur: MDPI
DOI: 10.3390/app11041525

Cellulose aerogel micro fibers for drug delivery applications

Auteurs: Matin Rostamitabar, Raman Subrahmanyam, Pavel Gurikov, Gunnar Seide, Stefan Jockenhoevel, Samaneh Ghazanfari
Publié dans: Materials Science and Engineering: C, Numéro 127, 2021, Page(s) 112196, ISSN 0928-4931
Éditeur: Elsevier BV
DOI: 10.1016/j.msec.2021.112196

Compressive failure of fiber composites containing stress concentrations: Homogenization with fiber-matrix interfacial decohesion based on a total Lagrangian formulation

Auteurs: Vedad Tojaga, Selcuk Hazar, Sören Östlund
Publié dans: Composites Science and Technology, Numéro 182, 2019, Page(s) 107758, ISSN 0266-3538
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2019.107758

Evaluating the degree of molecular contact between cellulose fiber surfaces using FRET microscopy

Auteurs: Georg Urstöger, Monica G. Simoes, Andreas Steinegger, Robert Schennach, Ulrich Hirn
Publié dans: Cellulose, Numéro 26/12, 2019, Page(s) 7037-7050, ISSN 0969-0239
Éditeur: Blackie Academic & Professional
DOI: 10.1007/s10570-019-02575-x

3D interfacial debonding during microbond testing: Advantages of local strain recording

Auteurs: R. Dsouza, P. Antunes, M. Kakkonen, J. Jokinen, E. Sarlin, P. Kallio, M. Kanerva
Publié dans: Composites Science and Technology, Numéro 195, 2020, Page(s) 108163, ISSN 0266-3538
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2020.108163

Tensile behaviour of dislocated/crystalline cellulose fibrils at the nano scale

Auteurs: Ali Khodayari, Aart W. Van Vuure, Ulrich Hirn, David Seveno
Publié dans: Carbohydrate Polymers, Numéro 235, 2020, Page(s) 115946, ISSN 0144-8617
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.carbpol.2020.115946

Evaluation of Hoffman and Xia plasticity models against bi-axial tension experiments of planar fiber network materials

Auteurs: Mossab Alzweighi, Rami Mansour, Johan Tryding, Artem Kulachenko
Publié dans: International Journal of Solids and Structures, Numéro 238, 2022, ISSN 0020-7683
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.ijsolstr.2021.111358

Effect of saturation adsorption of paper strength additives on the performance of paper

Auteurs: Zhao, Mengxiao; Robertsén, Leif; Wågberg, Lars; Pettersson, Torbjörn
Publié dans: Crossref, Numéro 3, 2022, ISSN 0283-2631
Éditeur: Mentor Communications AB
DOI: 10.1515/npprj-2022-0080

Generic Method for Designing Self-Standing and Dual Porous 3D Bioscaffolds from Cellulosic Nanomaterials for Tissue Engineering Applications

Auteurs: Tamilselvan Mohan,* Andreja Dobaj Štiglic, Marco Beaumont, Johannes Konnerth, Fazilet Gürer, Damjan Makuc, UrošMaver, Lidija Gradišnik, Janez Plavec, Rupert Kargl, and Karin Stana Kleinschek
Publié dans: Applied Bio Materials, 2020, ISSN 2576-6422
Éditeur: ACS
DOI: 10.1021/acsabm.9b01099

Drug‐Eluting Medical Textiles: From Fiber Production and Textile Fabrication to Drug Loading and Delivery

Auteurs: Matin Rostamitabar, Abdelrahman M. Abdelgawad, Stefan Jockenhoevel, Samaneh Ghazanfari
Publié dans: Macromolecular Bioscience, Numéro 21/7, 2021, Page(s) 2100021, ISSN 1616-5187
Éditeur: John Wiley & Sons Ltd.
DOI: 10.1002/mabi.202100021

The Additive Influence of Propane-1,2-Diol on SDS Micellar Structure and Properties

Auteurs: Gudelj Martina; Šurina Paola; Jurko Lucija; Prkić Ante; Bošković Perica
Publié dans: Molecules, Numéro 1, 2021, ISSN 1420-3049
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/molecules26123773

Design of biobased supply chains on a life cycle basis: A bi-objective optimization model and a case study of biobased polyethylene terephthalate (PET)

Auteurs: Carlos García-Velásquez, Sylvain Leduc, Yvonne van der Meer
Publié dans: Sustainable Production and Consumption, Numéro vol 30, 2022, ISSN 2352-5509
Éditeur: Elsavier
DOI: 10.1016/j.spc.2022.01.003

Experimental and numerical dataset of Microbond test using optical fibres for strain

Auteurs: R. Dsouza, P. Antunes, M. Kakkonen, J. Jokinen, E. Sarlin, P. Kallio, M. Kanerva
Publié dans: Data in Brief, Numéro 31, 2020, Page(s) 106017, ISSN 2352-3409
Éditeur: Elsevier BV
DOI: 10.1016/j.dib.2020.106017

Thermodynamic Properties of N-Benzyl-N,N-dimethyldodecan-1-aminium bromide Sufractant in Binary Mixture of Propane-1,2-diol and Water

Auteurs: Sunčica Srzentić, Martina Gudelj, Lucija Jurko, Rupert Kargl, Ante Prkić, Perica Bošković
Publié dans: International Journal of Electrochemical Science, 2022, ISSN 1452-3981
Éditeur: Electrochemical Science Group, University of Belgrade
DOI: 10.20964/2022.04.30

Cellulose based aerogel microfibers for biomedical applications

Auteurs: Rostamitabar Matin
Publié dans: 2022, ISBN 9789464691283
Éditeur: Maastricht University
DOI: 10.26481/dis.20221214mr

Livrables

Publications

Partager cette page

Télécharger