Hybrid Fibre-reinforced composites: achieving Synergetic effects through microstructural design and advanced simulation tools

Resultado final

Progress report

The report should describe the first year project progress

Report on communication

Website up and running

Open research data pilot report

Report on how the research data was disseminated

Publicaciones

Towards separator-free structural composite supercapacitors

Autores: Olivier Hubert, Nikola Todorovic, Alexander Bismarck
Publicado en: Composites Science and Technology, Edición 217, 2022, ISSN 0266-3538
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2021.109126

Fiber break model for tension-tension fatigue of unidirectional composites

Autores: Fazlali B., Lomov S.V., Swolfs Y.
Publicado en: Composites Part B: Engineering, Edición 220, 2021, Página(s) 108970, ISSN 1359-8368
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2021.108970

State-of-the-art models for mechanical performance of carbon-glass hybrid composites in wind turbine blades

Autores: Yentl Swolfs; Babak Fazlali; Arsen Melnikov; Francisco Mesquita; Vincent Feyen; Christian Breite; Larissa Gorbatikh; Stepan Vladimirovitch Lomov
Publicado en: IOP Conference Series: Materials Science and Engineering, 2020, ISSN 1757-8981
Editor: IOPscience
DOI: 10.1088/1757-899x/942/1/012005

Improving the performance of pseudo-ductile hybrid composites by film-interleaving

Autores: Marino, Salvatore Giacomo, Czél, Gergely
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición Vol. 142, p. 106233, 2021, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.106233

Experimental Method for Tensile Testing of Unidirectional Carbon Fibre Composites Using Improved Specimen Type and Data Analysis

Autores: Rajnish Kumar; Lars Pilgaard Mikkelsen; Hans Lilholt; Bo Madsen
Publicado en: Materials, Edición 2, 2021, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma14143939

Influence of test specimen geometry based on weakest link probability of failure

Autores: Rajnish Kumar, Bo Madsen, Hans Lilholt, Lars P. Mikkelsen
Publicado en: Materials, 2022, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma15113911

Separation of Composites for Recycling: Measurement of Electrostatic Charge of Carbon and Glass Fiber Particles

Autores: J. Thirunavukkarasu, M. Poulet, T. Turner, S. Pickering
Publicado en: International Journal of Electrical and Computer Engineering, Edición Volume 15, no. 10, 2021, ISSN 2088-8708
Editor: Institute of Advanced Engineering and Science (IAES)
DOI: 10.5281/zenodo.6558612

Longitudinal debonding in unidirectional fibre-reinforced composites: Numerical analysis of the effect of interfacial properties

Autores: AhmadvashAghbash, Sina; Breite, Christian; Mehdikhani, Mahoor; Swolfs, Yentl
Publicado en: Composites Science and Technology, 2022, Página(s) 109117, ISSN 0266-3538
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2021.109117

Finite element analysis of the effect of longitudinal debonding on stress redistributions around fibre breaks in randomly packed fibres

Autores: Sina AhmadvashAghbash, Babak Fazlali, Mahoor Mehdikhani, Yentl Swolfs
Publicado en: Composites Science and Technology, Edición 227, 2022, Página(s) 109586, ISSN 0266-3538
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2022.109586

Understanding the mechanical response of glass and carbon fibres: stress-strain analysis and modulus determination

Autores: Kumar, R., L.P. Mikkelsen, H. Lilholt, B. Madsen
Publicado en: IOP Conf. Ser.: Mater. Sci. Eng., Edición 942, 2020, Página(s) 012017, ISSN 1757-8981
Editor: IOP Publishing
DOI: 10.1088/1757-899x/942/1/012033

Effect of Plasma-Treatment of Interleaved Thermoplastic Films on Delamination in Interlayer Fibre Hybrid Composite Laminates

Autores: Marino S.G., Mayer F., Bismarck A., Czél G.
Publicado en: Polymers, Edición 12, 2020, Página(s) 2834, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym12122834

Resultado final

Publicaciones

Compartir esta página

Descargar