CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.
Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .
Resultado final
Defining the Quality Management Plan - introducing formal processes for the project life-cycle, and the evaluation and control of the deliverables and the project itself according to the quality standards and plans.
Proof-of-concept samples for PE EPR spectroscopy (se abrirá en una nueva ventana)UHV evaporation of an analysed material on the samples with and without PS (reference samples). Utilizing a patterned photoresist to provide selective deposition to specific sites (increase of the relative antenna signal contribution). Application of samples for PE THz EPR spectroscopy.
Scientific communication (se abrirá en una nueva ventana)Summary of the scientific communication containing at least 10 papers in impacted journals, at least 8 conference presentations during the duration of the project.
Interim CDE plan (se abrirá en una nueva ventana)Interim plan for the communiation, dissemination, and exploitation of project related activities and outputs. The CDE plan will be continuously updated according to project needs.
Proof-of-concept samples for PE EPR microscopy (se abrirá en una nueva ventana)UHV evaporation of an analysed material on the samples with and without PS (reference samples). Utilizing a patterned photoresist to provide selective deposition to specific sites (increase of the relative antenna signal contribution). Application of samples for PE THz EPR microscopy.
Updated Quality Management Plan (se abrirá en una nueva ventana)Updating the Quality Management Plan - introducing formal processes for the project life-cycle, and the evaluation and control of the deliverables and the project itself according to the quality standards and plans.
Specifications of PE EPR microscope (se abrirá en una nueva ventana)Discussion of detailed design criteria and prioritizing the constrictions of individual functional units of PE EPR microscope to be coherent with other units and posses required functionality.
Plasmon-enhanced EPR experiments (se abrirá en una nueva ventana)Application of the optimized THz apparatus and samples prepared for PE THz EPR experiments – assessment of the magnetic sensing field enhancement caused by PS, the scope and limitations of the setup. Continuous-improvement feed-back loop.
Data management plan (se abrirá en una nueva ventana)Data management plan specifying the data management life cycle for the data generated and processed within the project. Data management plan will continuously updated based on the needs.
Final CDE plan (se abrirá en una nueva ventana)Final version of the plan for the communiation, dissemination, and exploitation activities.
PS design for plasmon enhanced EPR (se abrirá en una nueva ventana)Theoretical simulations of local plasmon resonances in various PS, identification of the most suitable antennas for the EPR enhancement. Considered geometries based on the funnelling of current (e.g. diabolo antennas) and/or circulation of current (e.g. split-ring resonators).
Applications of PE EPR (se abrirá en una nueva ventana)Report on applications of newly developed PE THZ EPR method: Room temperature: ferromagnetic nano/microstructures fabricated by EBL and FIB, a commercial hard disk. Low temperature: Molecular nanomagnets (transition metal phthalocyanine thin films on various substrates).
Concept of PS (se abrirá en una nueva ventana)Critical discussion of various concepts of PS, definition of spatial restriction for implementation to cantilevers and identification of relevant fabrication methodology.
Fabrication of a folded PS by EBL/FIB on longer/wider tips (e.g. needles, sapphire shards,…) glued to cantilevers or watch tuning forks.
PS for PE EPR experiments in THz (se abrirá en una nueva ventana)Characterization of plasmon resonances by THz spectroscopy (USTUTT, NGU). Optimization of coupling of THz radiation to PS - design of a quasi-optics and its installation into the EPR apparatus. Utilizing the results as a feed-back for optimization of PS with respect to PE THz EPR.
Optimized cantilever tips for PE EPR microscopy (se abrirá en una nueva ventana)Fabrication of a folded PS by EBL/FIB on longer/wider tips (e.g. needles, sapphire shards,…) glued to cantilevers or watch tuning forks: Optimized structures.
PS with enhanced magnetic field (se abrirá en una nueva ventana)Fabrication of metallic and doped semiconductor PS by lithography (electron, photo). Graphene PS – patterning of exfoliated and CVD graphene by lithography, plasma etching, Special efforts - doping (electric or chemical) of graphene.
SPM unit for PE EPR microscopy: Prototype (se abrirá en una nueva ventana)Assembly of a scanning sample stage of SPM from a X, Y, Z scanning piezo unit (X, Y: 100 × 100 μm2) and closed loop x-y-z piezo sample manipulator for a precise navigation to a specific sample site. Equipping the head carrying the cantilever with a cantilever-deflection detection system and a piezo providing cantilever oscillations (non-contact mode). Working prototype.
SPM unit for PE EPR microscopy: Progress report (se abrirá en una nueva ventana)Assembly of a scanning sample stage of SPM from a X, Y, Z scanning piezo unit (X, Y: 100 × 100 μm2) and closed loop x-y-z piezo sample manipulator for a precise navigation to a specific sample site. Equipping the head carrying the cantilever with a cantilever-deflection detection system and a piezo providing cantilever oscillations (non-contact mode). Progress report.
Platform for PE EPR microscopy (se abrirá en una nueva ventana)Installation of the SPM unit delivered in D2.1-D2.3 into a LHe cryostat of the EPR apparatus – assembly of a platform-prototype for PE THz EPR microscopy. Testing and optimization of the platform.
Implementation of Open research data pilot in the project.
Visual identity of the project including the logo. Website and visibility at social networks.
Publicaciones
Autores:
Chao Chen, Shu Chen, Ricardo P.S.M. Lobo, Carlos Maciel-Escudero, Martin Lewin, Thomas Taubner, Wei Xiong, Ming Xu, Xinliang Zhang, Xiangshui Miao, Peining Li, Rainer Hillenbrand
Publicado en:
ACS Photonics, Edición 7/12, 2020, Página(s) 3499-3506, ISSN 2330-4022
Editor:
American Chemical Society
DOI:
10.1021/acsphotonics.0c01541
Autores:
Michal Kern, Lorenzo Tesi, David Neusser, Nadine Rußegger, Mario Winkler, Alexander Allgaier, Yannic M. Gross, Stefan Bechler, Hannes S. Funk, Li‐Te Chang, Jörg Schulze, Sabine Ludwigs, Joris van Slageren
Publicado en:
Advanced Functional Materials, Edición 16. 11. 2020, 2020, Página(s) 2006882, ISSN 1616-301X
Editor:
John Wiley & Sons Ltd.
DOI:
10.1002/adfm.202006882
Autores:
Lorenzo Tesi, Dominik Bloos, Martin Hrtoň, Adam Beneš, Mario Hentschel, Michal Kern, Alisa Leavesley, Rainer Hillenbrand, Vlastimil Křápek, Tomáš Šikola, Joris Slageren
Publicado en:
Small Methods, Edición 2021, 2021, Página(s) 2100376, ISSN 2366-9608
Editor:
Wiley-VCH GmbH
DOI:
10.1002/smtd.202100376
Autores:
Stefan Mastel, Alexander A. Govyadinov, Curdin Maissen, Andrey Chuvilin, Andreas Berger, Rainer Hillenbrand
Publicado en:
ACS Photonics, Edición 5/8, 2018, Página(s) 3372-3378, ISSN 2330-4022
Editor:
American Chemical Society
DOI:
10.1021/acsphotonics.8b00636
Autores:
Curdin Maissen, Shu Chen, Elizaveta Nikulina, Alexander Govyadinov, Rainer Hillenbrand
Publicado en:
ACS Photonics, Edición 6/5, 2019, Página(s) 1279-1288, ISSN 2330-4022
Editor:
American Chemical Society
DOI:
10.1021/acsphotonics.9b00324
Autores:
Martin Hrtoň, Andrea Konečná, Michal Horák, Tomáš Šikola, Vlastimil Křápek
Publicado en:
Physical Review Applied, Edición 13/5, 2020, ISSN 2331-7019
Editor:
American Physical Society
DOI:
10.1103/physrevapplied.13.054045
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles