ThermoformAble, repaIrable and bondable smaRt ePOXY based composites for aero structures

Deliverables

Documents, reports (5)

Report on the preliminary specifications for demonstrators

Report on the preliminary analysis and definition of specifications for the raw materials

Report on the standardization landscape and applicable standards

Public Website

Report on the preliminary analysis and definition of process technologies requirements for manufacturing, 3R bonding and repair

Publications

Thesis dissertations (4)

Untersuchung der Schweißbarkeit von faserverstärkten Vitrimerkunststoffen

Author(s): David Reichling, Stefan Weidmann
Published in: 2020
Publisher: IVW

"""Entwicklung und experimentelle Erprobung von Reparaturkonzepten für faserverstärkte Vitrimere"""

Author(s): Manuel Matheis, Stefan Weidmann
Published in: 2020
Publisher: IVW

Optimierung des Thermoformprozesses für faserverstärkte Vitrimerkunststoffe

Author(s): Philip Schüler, Stefan Weidmann
Published in: 2020
Publisher: IVW

Parameterstudie zur Herstellung ebener Halbzeuge aus faser-verstärkten Vitrimeren durch Heißpressen

Author(s): Alexander Linz, Andreas Krämer
Published in: 2020
Publisher: IVW

Other (4)

Einführung einer neuen Familie von Faser-Kunststoff-Verbunden

Author(s): Stefan Weidmann
Published in: 2020
Publisher: Composites United e.V.

AIRPOXY - Herstellung und Verarbeitung von Vitrimer-FKV / AIRPOXY - Production and processing of Vitrimer-FRPC

Author(s): Stefan Weidmann
Published in: 2021
Publisher: IVW

Einführung einer neuen Familie von Faser-Kunststoff-Verbunden / Introduction of a new family of Fiber Reinforced Polymer Composite

Author(s): Stefan Weidmann
Published in: 2021
Publisher: IVW

Keynote: Composite Manufacturing - New Developments and Trends in Europe

Author(s): Peter Mitschang
Published in: Advanced Manufacturing Technology Institute of Kanazawa University., 2021
Publisher: Advanced Manufacturing Technology Institute of Kanazawa University.

Conference proceedings (3)

AIRPOXY – Thermoforming and Welding of 3R-Vitrimer Based FRPC

Author(s): Stefan Weidmann, Stephan Becker, Peter Mang, Peter Mitschang
Published in: 2020
Publisher: IVW

Supporting tools to technical advance in the early stages of design

Author(s): Abderrahmen Aridhi, Jose Jorge Espi, Juan Pedro Berro and Mireia Mesas
Published in: MATEC Web Conferences, Volume 304, 2019, 2019
Publisher: EDP Sciences
DOI: 10.1051/matecconf/201930401022

"""NEW 3R BONDING TECHNOLOGY FOR REPARABLE, RECYCLABLE AND REPROCESSABLE AEROSPACE COMPOSITE MATERIALS"""

Author(s): Gema Solera, Nerea Markaide, Alaitz Ruiz de Luzuriaga, Asier Martínez
Published in: Proceedings SE Conference Amsterdam 20, 2020, ISBN 978-90-829101-4-8
Publisher: SAMPE Europe

Peer reviewed articles (1)

Study into the Mechanical Properties of a New Aeronautic-Grade Epoxy-Based Carbon-Fiber-Reinforced Vitrimer

Author(s): Builes Cárdenas, Cristian and Gayraud, Vincent and Rodriguez, Maria Eugenia and Costa, Josep and Salaberria, Asier M. and Ruiz de Luzuriaga, Alaitz and Markaide, Nerea and Dasan Keeryadath, Priya and Calderón Zapatería, Diego
Published in: Polymers, 2022, ISSN 2073-4360
Publisher: MDPI Open Access Journals
DOI: 10.3390/polym14061223