Printable Electronics on Paper through 2D materials based inks

Project Information

PEP2D

Grant agreement ID: 770047

DOI 10.3030/770047

Project closed

EC signature date 23 February 2018

Start date 1 March 2018

End date 29 February 2024

Funded under

• EXCELLENT SCIENCE - European Research Council (ERC)

Total cost € 1 883 868,00

EU contribution € 1 883 868,00

Coordinated by

UNIVERSITA DI PISA
Italy

Deliverables

Open Research Data Pilot (1)

Data Management Plan

Participation in the pilot project on Open Access on Research Data (ORD)

Publications

Peer reviewed articles (21)

Multiscale Simulations of 2-D Material Ink-Based Printed Network Devices

Author(s): Prabhat Kumar Dubey; Damiano Marian; Gianluca Fiori
Published in: IEEE Transactions on Electron Devices, Issue 4, 2023, ISSN 0018-9383
Publisher: Institute of Electrical and Electronics Engineers
DOI: 10.1109/ted.2022.3232082

Paper-based WS2 photodetectors fabricated by all-dry techniques

Author(s): Pieri, Francesco; Fiori, Gianluca
Published in: Opto-Electronic Advances, Issue 1, 2023, ISSN 2096-4579
Publisher: OE Journals Group
DOI: 10.29026/oea.2023.230077

Insulators for 2D nanoelectronics: the gap to bridge

Author(s): Yury Yu. Illarionov, Theresia Knobloch, Markus Jech, Mario Lanza, Deji Akinwande, Mikhail I. Vexler, Thomas Mueller, Max C. Lemme, Gianluca Fiori, Frank Schwierz, Tibor Grasser
Published in: Nature Communications, Issue 11/1, 2020, ISSN 2041-1723
Publisher: Nature Publishing Group
DOI: 10.1038/s41467-020-16640-8

Electronic Transport in 2D-Based Printed FETs from a Multiscale Perspective

Author(s): Marta Perucchini, Damiano Marian, Enrique G. Marin, Teresa Cusati, Giuseppe Iannaccone, Gianluca Fiori
Published in: Advanced Electronics Materials, Issue 2199160X, 2022, ISSN 2199-160X
Publisher: Wiley
DOI: 10.1002/aelm.202100972

Multi-scale simulations of two dimensional material based devices: the NanoTCAD ViDES suite

Author(s): Marian, Damiano; Marin, Enrique G.; Perucchini, Marta; Iannaccone, Giuseppe; Fiori, Gianluca
Published in: Journal of Computational Electronics, Issue 1, 2023, ISSN 1569-8025
Publisher: Kluwer Academic Publishers
DOI: 10.1007/s10825-023-02048-2

A SPICE Compact Model for Ambipolar 2-D-Material FETs Aiming at Circuit Design

Author(s): Sheikh Aamir Ahsan; Shivendra Kumar Singh; Mehak Ashraf Mir; Marta Perucchini; Dmitry K. Polyushkin; Thomas Mueller; Gianluca Fiori; Enrique G. Marin
Published in: IEEE Transactions on Electron Devices, Issue 00189383, 2021, ISSN 0018-9383
Publisher: Institute of Electrical and Electronics Engineers
DOI: 10.1109/ted.2021.3074357

Low-voltage 2D materials-based printed field-effect transistors for integrated digital and analog electronics on paper

Author(s): Silvia Conti, Lorenzo Pimpolari, Gabriele Calabrese, Robyn Worsley, Subimal Majee, Dmitry K. Polyushkin, Matthias Paur, Simona Pace, Dong Hoon Keum, Filippo Fabbri, Giuseppe Iannaccone, Massimo Macucci, Camilla Coletti, Thomas Mueller, Cinzia Casiraghi, Gianluca Fiori
Published in: Nature Communications, Issue 11/1, 2020, ISSN 2041-1723
Publisher: Nature Publishing Group
DOI: 10.1038/s41467-020-17297-z

Inkjet-printed graphene Hall mobility measurements and low-frequency noise characterization

Author(s): Gabriele Calabrese, Lorenzo Pimpolari, Silvia Conti, Fabrice Mavier, Subimal Majee, Robyn Worsley, Zihao Wang, Francesco Pieri, Giovanni Basso, Giovanni Pennelli, Khaled Parvez, David Brooks, Massimo Macucci, Giuseppe Iannaccone, Kostya S. Novoselov, Cinzia Casiraghi, Gianluca Fiori
Published in: Nanoscale, Issue 12/12, 2020, Page(s) 6708-6716, ISSN 2040-3364
Publisher: Royal Society of Chemistry
DOI: 10.1039/c9nr09289g

A 2-D-Material FET Verilog-A Model for Analog Neuromorphic Circuit Design

Author(s): Kumar Dubey, Prabhat; Strangio, Sebastiano; Marin, Enrique G.; Iannaccone, Giuseppe; Fiori, Gianluca
Published in: IEEE Transactions on Electron Devices, Issue 4, 2023, ISSN 0018-9383
Publisher: Institute of Electrical and Electronics Engineers
DOI: 10.1109/TED.2023.3298876

Hybrid MoS2/PEDOT:PSS transporting layers for interface engineering of nanoplatelet-based light-emitting diodes

Author(s): Roberto Sorrentino, Robyn Worsely, Paola Lagonegro, Christian Martella, Adriana Alieva, Guido Scavia, Francesco Galeotti, Mariacecilia Pasini, Benoit Dubertret, Sergio Brovelli, Alessandro Molle, Cinzia Casiraghi and Umberto Giovanella
Published in: Dalton Transactions, Issue 14779234, 2021, ISSN 1477-9234
Publisher: Royal Society of America
DOI: 10.1039/d1dt01066b

Modeling of Electron Devices Based on 2-D Materials

Author(s): E. G. Marin, M. Perucchini, D. Marian, G. Iannaccone, G. Fiori
Published in: IEEE Transactions on Electron Devices, Issue 65/10, 2018, Page(s) 4167-4179, ISSN 0018-9383
Publisher: Institute of Electrical and Electronics Engineers
DOI: 10.1109/ted.2018.2854902

1/f Noise Characterization of Bilayer MoS2 Field-Effect Transistors on Paper with Inkjet-Printed Contacts and hBN Dielectrics

Author(s): Lorenzo Pimpolari; Gabriele Calabrese; Silvia Conti; Robyn Worsley; Subimal Majee; Dmitry K. Polyushkin; Matthias Paur; Cinzia Casiraghi; Thomas Mueller; Giuseppe Iannaccone; Massimo Macucci; Gianluca Fiori
Published in: Advanced Electronic Materials, Issue 2199160X, 2021, ISSN 2199-160X
Publisher: Wiley
DOI: 10.1002/aelm.202100283

All-2D Material Inkjet-Printed Capacitors: Toward Fully Printed Integrated Circuits

Author(s): Robyn Worsley, Lorenzo Pimpolari, Daryl McManus, Ning Ge, Robert Ionescu, Jarrid A. Wittkopf, Adriana Alieva, Giovanni Basso, Massimo Macucci, Giuseppe Iannaccone, Kostya S. Novoselov, Helen Holder, Gianluca Fiori, Cinzia Casiraghi
Published in: ACS Nano, 2018, ISSN 1936-0851
Publisher: American Chemical Society
DOI: 10.1021/acsnano.8b06464

Transport properties in partially overlapping van der Waals junctions through a multiscale investigation

Author(s): Cannavò, Emmanuele; Marian, Damiano; Marin, Enrique G.; Iannaccone, Giuseppe; Fiori, Gianluca
Published in: PHYSICAL REVIEW B, Issue 24699950, 2021, ISSN 2469-9950
Publisher: American Physical Society
DOI: 10.1103/physrevb.104.085433

Rhombohedral-stacked bilayer transition metal dichalcogenides for high-performance atomically thin CMOS devices

Author(s): Xuefei Li; Xinhang Shi; Damiano Marian; David Soriano; Teresa Cusati; Giuseppe Iannaccone; Gianluca Fiori; Qi Guo; Wenjie Zhao; Yanqing Wu
Published in: Science Advances, Issue 3, 2023, ISSN 2375-2548
Publisher: American Association for the Advancement of Science
DOI: 10.1126/sciadv.ade5706

Naturally Degradable Photonic Devices with Transient Function by Heterostructured Waxy‐Sublimating and Water‐Soluble Materials

Author(s): Andrea Camposeo, Francesca D'Elia, Alberto Portone, Francesca Matino, Matteo Archimi, Silvia Conti, Gianluca Fiori, Dario Pisignano, Luana Persano
Published in: Advanced Science, Issue 7/20, 2020, Page(s) 2001594, ISSN 2198-3844
Publisher: John Wiley & Sons Ltd.
DOI: 10.1002/advs.202001594

Water-based 2-dimensional anatase TiO₂ inks for printed diodes and transistors

Author(s): Omar Kassem; Lorenzo Pimpolari; Chaochao Dun; Dmitry K. Polyushkin; Marco Zarattini; Elisabetta Dimaggio; Liming Chen; Giovanni Basso; Federico Parenti; Jeffrey J. Urban; Thomas Mueller; Gianluca Fiori; Cinzia Casiraghi
Published in: Nanoscale, Issue 2, 2023, ISSN 2040-3372
Publisher: Royal Society of Chemistry
DOI: 10.1039/d2nr05786g

Inkjet-printed low-dimensional materials-based complementary electronic circuits on paper

Author(s): Irene Brunetti, Lorenzo Pimpolari, Silvia Conti, Robyn Worsley, Subimal Majee, Dmitry K. Polyushkin, Matthias Paur, Elisabetta Dimaggio, Giovanni Pennelli, Giuseppe Iannaccone, Massimo Macucci, Francesco Pieri, Thomas Mueller,Cinzia Casiraghi and Gianluca Fiori
Published in: npj - 2D Materials and Applications, Issue 23977132, 2022, ISSN 2397-7132
Publisher: Springer Nature
DOI: 10.1038/s41699-021-00266-5

Anisotropic Thermal Conductivity of Inkjet-Printed 2D Crystal Films: Role of the Microstructure and Interfaces

Author(s): Mizanur Rahman; Khaled Parvez; Giorgia Fugallo; Chaochao Dun; Oliver Read; Adriana Alieva; Jeffrey Urban; Michele Lazzeri; Cinzia Casiraghi; Simone Pisana
Published in: Nanomaterials, Issue 11, 2022, ISSN 2079-4991
Publisher: MDPI
DOI: 10.3390/nano12213861

Novel Anticounterfeiting Solution Based on 2D Materials Produced by Electrochemical Exfoliation

Author(s): Read O.; Parvez K.; Boyes M.; Song X.; Wang J.; Fiori G.; Casiraghi C.
Published in: Small, Issue 4, 2024, ISSN 1613-6810
Publisher: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/smll.202307232

Gas Blow Coating: A Deposition Technique To Control the Crystal Morphology in Thin Films of Organic Semiconductors

Author(s): Jincheng Tong, Amadou Doumbia, Adriana Alieva, Michael L. Turner, Cinzia Casiraghi
Published in: ACS Omega, Issue 4/7, 2019, Page(s) 11657-11662, ISSN 2470-1343
Publisher: ACS Publisher
DOI: 10.1021/acsomega.9b00835