Printable Electronics on Paper through 2D materials based inks

Rezultaty

Participation in the pilot project on Open Access on Research Data (ORD)

Publikacje

Multiscale Simulations of 2-D Material Ink-Based Printed Network Devices

Autorzy: Prabhat Kumar Dubey; Damiano Marian; Gianluca Fiori
Opublikowane w: IEEE Transactions on Electron Devices, Numer 4, 2023, ISSN 0018-9383
Wydawca: Institute of Electrical and Electronics Engineers
DOI: 10.1109/ted.2022.3232082

Paper-based WS2 photodetectors fabricated by all-dry techniques

Autorzy: Pieri, Francesco; Fiori, Gianluca
Opublikowane w: Opto-Electronic Advances, Numer 1, 2023, ISSN 2096-4579
Wydawca: OE Journals Group
DOI: 10.29026/oea.2023.230077

Insulators for 2D nanoelectronics: the gap to bridge

Autorzy: Yury Yu. Illarionov, Theresia Knobloch, Markus Jech, Mario Lanza, Deji Akinwande, Mikhail I. Vexler, Thomas Mueller, Max C. Lemme, Gianluca Fiori, Frank Schwierz, Tibor Grasser
Opublikowane w: Nature Communications, Numer 11/1, 2020, ISSN 2041-1723
Wydawca: Nature Publishing Group
DOI: 10.1038/s41467-020-16640-8

Electronic Transport in 2D-Based Printed FETs from a Multiscale Perspective

Autorzy: Marta Perucchini, Damiano Marian, Enrique G. Marin, Teresa Cusati, Giuseppe Iannaccone, Gianluca Fiori
Opublikowane w: Advanced Electronics Materials, Numer 2199160X, 2022, ISSN 2199-160X
Wydawca: Wiley
DOI: 10.1002/aelm.202100972

Multi-scale simulations of two dimensional material based devices: the NanoTCAD ViDES suite

Autorzy: Marian, Damiano; Marin, Enrique G.; Perucchini, Marta; Iannaccone, Giuseppe; Fiori, Gianluca
Opublikowane w: Journal of Computational Electronics, Numer 1, 2023, ISSN 1569-8025
Wydawca: Kluwer Academic Publishers
DOI: 10.1007/s10825-023-02048-2

A SPICE Compact Model for Ambipolar 2-D-Material FETs Aiming at Circuit Design

Autorzy: Sheikh Aamir Ahsan; Shivendra Kumar Singh; Mehak Ashraf Mir; Marta Perucchini; Dmitry K. Polyushkin; Thomas Mueller; Gianluca Fiori; Enrique G. Marin
Opublikowane w: IEEE Transactions on Electron Devices, Numer 00189383, 2021, ISSN 0018-9383
Wydawca: Institute of Electrical and Electronics Engineers
DOI: 10.1109/ted.2021.3074357

Low-voltage 2D materials-based printed field-effect transistors for integrated digital and analog electronics on paper

Autorzy: Silvia Conti, Lorenzo Pimpolari, Gabriele Calabrese, Robyn Worsley, Subimal Majee, Dmitry K. Polyushkin, Matthias Paur, Simona Pace, Dong Hoon Keum, Filippo Fabbri, Giuseppe Iannaccone, Massimo Macucci, Camilla Coletti, Thomas Mueller, Cinzia Casiraghi, Gianluca Fiori
Opublikowane w: Nature Communications, Numer 11/1, 2020, ISSN 2041-1723
Wydawca: Nature Publishing Group
DOI: 10.1038/s41467-020-17297-z

Inkjet-printed graphene Hall mobility measurements and low-frequency noise characterization

Autorzy: Gabriele Calabrese, Lorenzo Pimpolari, Silvia Conti, Fabrice Mavier, Subimal Majee, Robyn Worsley, Zihao Wang, Francesco Pieri, Giovanni Basso, Giovanni Pennelli, Khaled Parvez, David Brooks, Massimo Macucci, Giuseppe Iannaccone, Kostya S. Novoselov, Cinzia Casiraghi, Gianluca Fiori
Opublikowane w: Nanoscale, Numer 12/12, 2020, Strona(/y) 6708-6716, ISSN 2040-3364
Wydawca: Royal Society of Chemistry
DOI: 10.1039/c9nr09289g

A 2-D-Material FET Verilog-A Model for Analog Neuromorphic Circuit Design

Autorzy: Kumar Dubey, Prabhat; Strangio, Sebastiano; Marin, Enrique G.; Iannaccone, Giuseppe; Fiori, Gianluca
Opublikowane w: IEEE Transactions on Electron Devices, Numer 4, 2023, ISSN 0018-9383
Wydawca: Institute of Electrical and Electronics Engineers
DOI: 10.1109/TED.2023.3298876

Hybrid MoS2/PEDOT:PSS transporting layers for interface engineering of nanoplatelet-based light-emitting diodes

Autorzy: Roberto Sorrentino, Robyn Worsely, Paola Lagonegro, Christian Martella, Adriana Alieva, Guido Scavia, Francesco Galeotti, Mariacecilia Pasini, Benoit Dubertret, Sergio Brovelli, Alessandro Molle, Cinzia Casiraghi and Umberto Giovanella
Opublikowane w: Dalton Transactions, Numer 14779234, 2021, ISSN 1477-9234
Wydawca: Royal Society of America
DOI: 10.1039/d1dt01066b

Modeling of Electron Devices Based on 2-D Materials

Autorzy: E. G. Marin, M. Perucchini, D. Marian, G. Iannaccone, G. Fiori
Opublikowane w: IEEE Transactions on Electron Devices, Numer 65/10, 2018, Strona(/y) 4167-4179, ISSN 0018-9383
Wydawca: Institute of Electrical and Electronics Engineers
DOI: 10.1109/ted.2018.2854902

1/f Noise Characterization of Bilayer MoS2 Field-Effect Transistors on Paper with Inkjet-Printed Contacts and hBN Dielectrics

Autorzy: Lorenzo Pimpolari; Gabriele Calabrese; Silvia Conti; Robyn Worsley; Subimal Majee; Dmitry K. Polyushkin; Matthias Paur; Cinzia Casiraghi; Thomas Mueller; Giuseppe Iannaccone; Massimo Macucci; Gianluca Fiori
Opublikowane w: Advanced Electronic Materials, Numer 2199160X, 2021, ISSN 2199-160X
Wydawca: Wiley
DOI: 10.1002/aelm.202100283

All-2D Material Inkjet-Printed Capacitors: Toward Fully Printed Integrated Circuits

Autorzy: Robyn Worsley, Lorenzo Pimpolari, Daryl McManus, Ning Ge, Robert Ionescu, Jarrid A. Wittkopf, Adriana Alieva, Giovanni Basso, Massimo Macucci, Giuseppe Iannaccone, Kostya S. Novoselov, Helen Holder, Gianluca Fiori, Cinzia Casiraghi
Opublikowane w: ACS Nano, 2018, ISSN 1936-0851
Wydawca: American Chemical Society
DOI: 10.1021/acsnano.8b06464

Transport properties in partially overlapping van der Waals junctions through a multiscale investigation

Autorzy: Cannavò, Emmanuele; Marian, Damiano; Marin, Enrique G.; Iannaccone, Giuseppe; Fiori, Gianluca
Opublikowane w: PHYSICAL REVIEW B, Numer 24699950, 2021, ISSN 2469-9950
Wydawca: American Physical Society
DOI: 10.1103/physrevb.104.085433

Rhombohedral-stacked bilayer transition metal dichalcogenides for high-performance atomically thin CMOS devices

Autorzy: Xuefei Li; Xinhang Shi; Damiano Marian; David Soriano; Teresa Cusati; Giuseppe Iannaccone; Gianluca Fiori; Qi Guo; Wenjie Zhao; Yanqing Wu
Opublikowane w: Science Advances, Numer 3, 2023, ISSN 2375-2548
Wydawca: American Association for the Advancement of Science
DOI: 10.1126/sciadv.ade5706

Naturally Degradable Photonic Devices with Transient Function by Heterostructured Waxy‐Sublimating and Water‐Soluble Materials

Autorzy: Andrea Camposeo, Francesca D'Elia, Alberto Portone, Francesca Matino, Matteo Archimi, Silvia Conti, Gianluca Fiori, Dario Pisignano, Luana Persano
Opublikowane w: Advanced Science, Numer 7/20, 2020, Strona(/y) 2001594, ISSN 2198-3844
Wydawca: John Wiley & Sons Ltd.
DOI: 10.1002/advs.202001594

Water-based 2-dimensional anatase TiO<sub>2</sub> inks for printed diodes and transistors

Autorzy: Omar Kassem; Lorenzo Pimpolari; Chaochao Dun; Dmitry K. Polyushkin; Marco Zarattini; Elisabetta Dimaggio; Liming Chen; Giovanni Basso; Federico Parenti; Jeffrey J. Urban; Thomas Mueller; Gianluca Fiori; Cinzia Casiraghi
Opublikowane w: Nanoscale, Numer 2, 2023, ISSN 2040-3372
Wydawca: Royal Society of Chemistry
DOI: 10.1039/d2nr05786g

Inkjet-printed low-dimensional materials-based complementary electronic circuits on paper

Autorzy: Irene Brunetti, Lorenzo Pimpolari, Silvia Conti, Robyn Worsley, Subimal Majee, Dmitry K. Polyushkin, Matthias Paur, Elisabetta Dimaggio, Giovanni Pennelli, Giuseppe Iannaccone, Massimo Macucci, Francesco Pieri, Thomas Mueller,Cinzia Casiraghi and Gianluca Fiori
Opublikowane w: npj - 2D Materials and Applications, Numer 23977132, 2022, ISSN 2397-7132
Wydawca: Springer Nature
DOI: 10.1038/s41699-021-00266-5

Anisotropic Thermal Conductivity of Inkjet-Printed 2D Crystal Films: Role of the Microstructure and Interfaces

Autorzy: Mizanur Rahman; Khaled Parvez; Giorgia Fugallo; Chaochao Dun; Oliver Read; Adriana Alieva; Jeffrey Urban; Michele Lazzeri; Cinzia Casiraghi; Simone Pisana
Opublikowane w: Nanomaterials, Numer 11, 2022, ISSN 2079-4991
Wydawca: MDPI
DOI: 10.3390/nano12213861

Novel Anticounterfeiting Solution Based on 2D Materials Produced by Electrochemical Exfoliation

Autorzy: Read O.; Parvez K.; Boyes M.; Song X.; Wang J.; Fiori G.; Casiraghi C.
Opublikowane w: Small, Numer 4, 2024, ISSN 1613-6810
Wydawca: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/smll.202307232

Gas Blow Coating: A Deposition Technique To Control the Crystal Morphology in Thin Films of Organic Semiconductors

Autorzy: Jincheng Tong, Amadou Doumbia, Adriana Alieva, Michael L. Turner, Cinzia Casiraghi
Opublikowane w: ACS Omega, Numer 4/7, 2019, Strona(/y) 11657-11662, ISSN 2470-1343
Wydawca: ACS Publisher
DOI: 10.1021/acsomega.9b00835

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz