Tough Interface Tailored Nanostructured Metals

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Publicaciones

Limpet teeth microstructure unites auxeticity with extreme strength and high stiffness

Autores: S.H. Oh, J.-K. Kim, Y. Liu, M. Wurmshuber, X.-L. Peng, J Seo, J. Jeong, Z. Wang, J. Wilmers, C. Soyarslan, J. Kim, B. Kittiwirayanon, J. Jeong, H.-J. Kim, Y.H. Huh, D. Kiener, S. Bargmann, H. Gao
Publicado en: Science Advances, Edición 8, eadd4644, 2022, ISSN 2375-2548
Editor: American Association for the Advancement of Science
DOI: 10.1126/sciadv.add4644

Controlling the high temperature deformation behavior and thermal stability of ultra-fine-grained W by re alloying

Autores: J. Kappacher, O. Renk, D. Kiener, H. Clemens, V. Maier-Kiener
Publicado en: Journal of Materials Research, Edición online, 2021, ISSN 0884-2914
Editor: Materials Research Society
DOI: 10.1557/s43578-020-00026-z

Interface mediated deformation and fracture of an elastic–plastic bimaterial system resolved by in situ transmission scanning electron microscopy

Autores: M. Alfreider, G.H. Balbus, F. Wang, J. Zechner, D.S. Gianola, D. Kiener
Publicado en: Materials & Design, Edición 223, 111136, 2022, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2022.111136

In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy

Autores: M. Burtscher, M. Alfreider, K. Schmuck, H. Clemens, S. Mayer, D. Kiener
Publicado en: Journal of Materials Research, Edición online, 2021, ISSN 0884-2914
Editor: Materials Research Society
DOI: 10.1557/jmr.2020.306

Open-cell tungsten nanofoams: Scaling behavior and structural disorder dependence of Young’s modulus and flow strength

Autores: Mingyue Zhao, Karsten Schlueter, Michael Wurmshuber, Maria Reitgruber, Daniel Kiener
Publicado en: Materials & Design, Edición 197, 2021, Página(s) 109187, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2020.109187

Revealing dynamic-mechanical properties of precipitates in a nanostructured thin film using micromechanical spectroscopy

Autores: Markus Alfreider, Michael Meindlhumer, Tobias Ziegelwanger, Rostislav Daniel, Jozef Keckes, Daniel Kiener
Publicado en: MRS Bulletin, Edición online, 2023, ISSN 0883-7694
Editor: Materials Research Society
DOI: 10.1557/s43577-023-00549-w

An analytical solution for the correct determination of crack lengths via cantilever stiffness

Autores: Markus Alfreider, Stefan Kolitsch, Stefan Wurster, Daniel Kiener
Publicado en: Materials & Design, Edición 194, 2020, Página(s) 108914, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2020.108914

Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloy

Autores: Michael Burtscher, Irmgard Weißensteiner, Reinhold Wartbichler, Katharina Kirchheimer, Christian Bernhard, Daniel Kiener, Helmut Clemens
Publicado en: Journal of alloys and compounds, Edición 969, 2023, Página(s) 172400, ISSN 0925-8388
Editor: Elsevier BV
DOI: 10.1016/j.jallcom.2023.172400

Lower hardness than strength: The auxetic composite microstructure of limpet tooth

Autores: Michael Wurmshuber, Jana Wilmers, Jongil Kim, Sang Ho Oh, Swantje Bargmann, Daniel Kiener
Publicado en: Acta Biomaterialia, Edición 166, 2023, Página(s) 447, ISSN 1742-7061
Editor: Elsevier BV
DOI: 10.1016/j.actbio.2023.04.035

Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten

Autores: Michael Wurmshuber, Markus Alfreider, Stefan Wurster, Michael Burtscher, Reinhard Pippan, Daniel Kiener
Publicado en: Acta Materialia, Edición 250, 2023, Página(s) 118878, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2023.118878

From unlikely pairings to functional nanocomposites: FeTi–Cu as a model system

Autores: Lukas Schweiger, Daniel Kiener, Michael Burtscher, Erhard Schafler, Gregor Karl Mori, Florian Spieckermann, Jürgen Eckert
Publicado en: Materials today advances, Edición 20, 2023, Página(s) 100433, ISSN 2590-0498
Editor: Elsevier
DOI: 10.1016/j.mtadv.2023.100433

Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. Untreated surfaces

Autores: Alexander Jelinek, Daniel Kiener, Markus Alfreider, Elisabeth Rossegger, Sandra Schlögl
Publicado en: Materials & Design, Edición 242, 2024, Página(s) 112994, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2024.112994

Open-cell tungsten nanofoams: Chloride ion induced structure modification and mechanical behavior

Autores: Mingyue Zhao, Manuel J. Pfeifenberger, Daniel Kiener
Publicado en: Results in Physics, Edición 17, 2020, Página(s) 103062, ISSN 2211-3797
Editor: Elsevier BV
DOI: 10.1016/j.rinp.2020.103062

How grain boundary characteristics influence plasticity close to and above the critical temperature of ultra-fine grained bcc Ta2.5W

Autores: J. Kappacher, O. Renk, D. Kiener, H. Clemens, V. Maier-Kiener
Publicado en: Acta Materialia, Edición 216, 117110, 2021, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2021.117110

Automatic and time-resolved determination of fracture characteristics from in situ experiments

Autores: K. Schmuck, M. Antenreiter, M. Alfreider, D. Kiener
Publicado en: Materials & Design, Edición 243, 2024, Página(s) 113038, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2024.113038

In situ micromechanical analysis of a nano-crystalline W-Cu composite

Autores: M. Burtscher, M. Alfreider, C. Kainz, K. Schmuck, D. Kiener
Publicado en: Materials & Design, Edición 220, 110848, 2022, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2022.110848

High-Temperature Nanoindentation of an Advanced Nano-Crystalline W/Cu Composite

Autores: M. Burtscher, M. Zhao, J. Kappacher, A. Leitner, M. Wurmshuber, M. Pfeifenberger, V. Maier-Kiener, D. Kiener
Publicado en: Nanomaterials, Edición 11, 2951, 2021, ISSN 2079-4991
Editor: MDPI
DOI: 10.3390/nano11112951

Disordered Interfaces Enable High Temperature Thermal Stability and Strength in a Nanocrystalline Aluminum Alloy

Autores: Glenn H. Balbus, Johann Kappacher, David J. Sprouster, Fulin Wang, Jungho Shin, Yolita M. Eggeler, Timothy J. Rupert, Jason R. Trelewicz, Daniel Kiener, Verena Maier-Kiener, Daniel S. Gianola
Publicado en: Acta Materialia, Edición online, 2021, Página(s) 116973, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2021.116973

Thermally activated deformation mechanisms and solid solution softening in W-Re alloys investigated via high temperature nanoindentation

Autores: Johann Kappacher, Alexander Leitner, Daniel Kiener, Helmut Clemens, Verena Maier-Kiener
Publicado en: Materials & Design, Edición 189, 2020, Página(s) 108499, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2020.108499

Strength determination for rough substrate-coating interfaces with three-dimensional defect structure

Autores: Thomas Klünsner, Martin Krobath, Ruth Konetschnik, Christian Tritremmel, Verena Maier-Kiener, D. Samardzic, Werner Ecker, Christoph Czettl, Christian Mitterer, Daniel Kiener
Publicado en: International journal of refractory metals & hard materials, Edición 112, 2023, Página(s) 106149, ISSN 0263-4368
Editor: Elsevier
DOI: 10.1016/j.ijrmhm.2023.106149

Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing

Autores: Matthias Gsellmann, Thomas Klünsner, Christian Mitterer, Martin Krobath, Michael Wurmshuber, Harald Leitner, Werner Ecker, Stefan Marsoner, Verena Maier-Kiener, Daniel Kiener, Gerald Ressel
Publicado en: Materials & Design, Edición 204, 2021, Página(s) 109690, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2021.109690

Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution

Autores: Mingyue Zhao, Inas Issa, Manuel J. Pfeifenberger, Michael Wurmshuber, Daniel Kiener
Publicado en: Acta Materialia, Edición 182, 2020, Página(s) 215-225, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2019.10.030

Crack length estimations for small-scale fracture experiments via image processing techniques

Autores: K. Schmuck, M. Alfreider, D. Kiener
Publicado en: Journal of Materials Research, Edición 37, 2848, 2022, ISSN 0884-2914
Editor: Materials Research Society
DOI: 10.1557/s43578-022-00681-4

Fracture properties of ultrafine grain chromium correlated to single dislocation processes at room temperature—ADDENDUM

Autores: I. Issa, A. Hohenwarter, R. Fritz, D. Kiener
Publicado en: Journal of Materials Research, Edición 34/24, 2019, Página(s) 1, ISSN 0884-2914
Editor: Materials Research Society
DOI: 10.1557/jmr.2019.286

Prospects of Using Small Scale Testing to Examine Different Deformation Mechanisms in Nanoscale Single Crystals—A Case Study in Mg

Autores: Daniel Kiener, Jiwon Jeong, Markus Alfreider, Ruth Konetschnik, Sang Ho Oh
Publicado en: Crystals, Edición 11/1, 2021, Página(s) 61, ISSN 2073-4352
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/cryst11010061

High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing

Autores: Alexander Jelinek, Stanislav Žák, Markus Alfreider, Daniel Kiener
Publicado en: Advanced Engineering Materials, Edición 25, 2023, Página(s) 2200288, ISSN 1438-1656
Editor: John Wiley & Sons Ltd.
DOI: 10.1002/adem.202200288

On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloy

Autores: Gloria Graf, Malina Seyffertitz, Petra Spörk-Erdely, Helmut Clemens, Andreas Stark, Lukas Hatzenbichler, David Holec, Michael Burtscher, Daniel Kiener, Xiaobing Li, Kui Liu
Publicado en: Intermetallics, Edición 161, 2023, Página(s) 107962, ISSN 0966-9795
Editor: Elsevier BV
DOI: 10.1016/j.intermet.2023.107962

Autores: Q. Xu, D. Şopu, X. Yuan, D. Kiener, J. Eckert
Publicado en: Acta Materialia, Edición 237, 118191, 2022, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2022.118191

Experimental and Numerical Investigation of the Deformation and Fracture Mode of Microcantilever Beams Made of Cr(Re)/Al2O3 Metal–Matrix Composite

Autores: Witold Węglewski, Pandi Pitchai, Kamil Bochenek, Gabriella Bolzon, Ruth Konetschnik, Bernhard Sartory, Reinhold Ebner, Daniel Kiener, Michał Basista
Publicado en: Metallurgical and Materials Transactions A, Edición 51/5, 2020, Página(s) 2377-2390, ISSN 1073-5623
Editor: ASM International
DOI: 10.1007/s11661-020-05687-3

Intrinsic toughness of the bulk-metallic glass Vitreloy 105 measured using micro-cantilever beams

Autores: Daniel Sorensen, Eric Hintsala, Joseph Stevick, Jesse Pischlar, Bernard Li, Daniel Kiener, Jason C. Myers, Hui Jin, Jia Liu, Douglas Stauffer, Antonio J. Ramirez, Robert O. Ritchie
Publicado en: Acta Materialia, Edición 183, 2020, Página(s) 242-248, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2019.11.021

The effect of grain size on bubble formation and evolution in helium-irradiated Cu-Fe-Ag

Autores: M. Wurmshuber, D. Frazer, M. Balooch, I. Issa, A. Bachmaier, P. Hosemann, D. Kiener
Publicado en: Materials Characterization, Edición 171, 2021, Página(s) 110822, ISSN 1044-5803
Editor: Elsevier BV
DOI: 10.1016/j.matchar.2020.110822

Deformation and failure behavior of nanocrystalline WCu

Autores: Michael Burtscher, Markus Alfreider, Christina Kainz, Daniel Kiener
Publicado en: Materials Science and Engineering A, Edición 887, 2023, Página(s) 145760, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2023.145760

How the interface type manipulates the thermomechanical response of nanostructured metals: A case study on nickel

Autores: O. Renk, V. Maier-Kiener, C. Motz, J. Eckert, D. Kiener, R. Pippan
Publicado en: Materialia, Edición 15, 2021, Página(s) 101020, ISSN 2589-1529
Editor: Elsevier B.V.
DOI: 10.1016/j.mtla.2021.101020

Helium-induced swelling and mechanical property degradation in ultrafine-grained W and W-Cu nanocomposites for fusion applications

Autores: M. Wurmshuber, M. Balooch, X. Huang, P. Hosemann, D. Kiener
Publicado en: Scripta Materialia, Edición 213, 114641, 2022, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.scriptamat.2022.114641

Micro-Mechanical Fracture Investigations on Grain Size Tailored Tungsten-Copper Nanocomposites

Autores: Klemens Schmuck, Michael Burtscher, Markus Alfreider, Michael Wurmshuber, Daniel Kiener
Publicado en: JOM, Edición 76, 2024, Página(s) 2302-2314, ISSN 1047-4838
Editor: J O M Institute
DOI: 10.1007/s11837-023-06348-7

Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications

Autores: M. Wurmshuber, S. Doppermann, S. Wurster, S. Jakob, M. Balooch, M. Alfreider, K. Schmuck, R. Bodlos, L. Romaner, P. Hosemann, H. Clemens, V. Maier-Kiener, D. Kiener
Publicado en: International Journal of Refractory Metals and Hard Materials, Edición 111, 2023, Página(s) 106125, ISSN 2213-3917
Editor: Elsevier
DOI: 10.1016/j.ijrmhm.2023.106125

Mechanical performance of doped W–Cu nanocomposites

Autores: M. Wurmshuber, M. Burtscher, S. Doppermann, R. Bodlos, D. Scheiber, L. Romaner, D. Kiener
Publicado en: Material Science & Engineering: A, Edición 857, 144102, 2022, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2022.144102

Ultrafine-grained Tungsten by High-Pressure Torsion – Bulk precursor versus powder processing route

Autores: M Wurmshuber, S Doppermann, S Wurster, D Kiener
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 580, 2019, Página(s) 012051, ISSN 1757-899X
Editor: IOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/580/1/012051

Probing defect relaxation in ultra-fine grained Ta using micromechanical spectroscopy

Autores: M. Alfreider, I. Issa, O. Renk, D. Kiener
Publicado en: Acta Materialia, Edición 185, 2020, Página(s) 309-319, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2019.12.011

Exploring Refinement Characteristics in FeTi‐Cux Composites: A Study of Localization and Abrasion Constraints

Autores: Lukas Schweiger, Florian Spieckermann, Nadine Buchebner, Julius F. Keckes, Daniel Kiener, Jürgen Eckert
Publicado en: Advanced Engineering Materials, Edición online, 2024, ISSN 1438-1656
Editor: John Wiley & Sons Ltd.
DOI: 10.1002/adem.202400593

Initiation of fatigue damage in ultrafine grained metal films

Autores: O. Glushko, D. Kiener
Publicado en: Acta Materialia, Edición 206, 2021, Página(s) 116599, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2020.116599

100 years after Griffith: From brittle bulk fracture to failure in 2D materials

Autores: D. Kiener, S.M. Han
Publicado en: MRS Bulletin, Edición 47, 792, 2022, ISSN 0883-7694
Editor: Materials Research Society
DOI: 10.1557/s43577-022-00379-2

A Perspective to Control Laser-Induced Periodic Surface Structure Formation at Glancing-Incident Femtosecond Laser-Processed Surfaces

Autores: A. Jelinek, M.J. Pfeifenberger, R. Pippan, D. Kiener
Publicado en: JOM, Edición 73, 4248, 2021, ISSN 1047-4838
Editor: J O M Institute
DOI: 10.1007/s11837-021-04963-w

Advances in multi-scale mechanical characterization

Autores: K. Mangalampalli, P. Ghosh, F. Volpi, D. Kiener, A. Useinov
Publicado en: Journal of Applied Physics, Edición 132, 220401, 2022, ISSN 0021-8979
Editor: American Institute of Physics
DOI: 10.1063/5.0135275

Fracture mechanics of micro samples: Fundamental considerations

Autores: R. Pippan, S. Wurster, D. Kiener
Publicado en: Materials & Design, Edición 159, 2018, Página(s) 252-267, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2018.09.004

Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag

Autores: Michael Wurmshuber, David Frazer, Andrea Bachmaier, Yongqiang Wang, Peter Hosemann, Daniel Kiener
Publicado en: Materials & Design, Edición 160, 2018, Página(s) 1148-1157, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2018.11.007

Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation

Autores: O. Renk, V. Maier-Kiener, I. Issa, J.H. Li, D. Kiener, R. Pippan
Publicado en: Acta Materialia, Edición 165, 2019, Página(s) 409-419, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2018.12.002

Rate limiting deformation mechanisms of bcc metals in confined volumes

Autores: D. Kiener, R. Fritz, M. Alfreider, A. Leitner, R. Pippan, V. Maier-Kiener
Publicado en: Acta Materialia, Edición 166, 2019, Página(s) 687-701, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2019.01.020

Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase

Autores: Amy Wat, Je In Lee, Chae Woo Ryu, Bernd Gludovatz, Jinyeon Kim, Antoni P. Tomsia, Takehiko Ishikawa, Julianna Schmitz, Andreas Meyer, Markus Alfreider, Daniel Kiener, Eun Soo Park, Robert O. Ritchie
Publicado en: Nature Communications, Edición 10/1, 2019, Página(s) 961, ISSN 2041-1723
Editor: Nature Publishing Group
DOI: 10.1038/s41467-019-08753-6

Fracture properties of ultrafine grain chromium correlated to single dislocation processes at room temperature

Autores: Inas Issa, Anton Hohenwarter, Reinhard Fritz, Daniel Kiener
Publicado en: Journal of Materials Research, Edición 34/13, 2019, Página(s) 2370-2383, ISSN 0884-2914
Editor: Materials Research Society
DOI: 10.1557/jmr.2019.140

Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers

Autores: Y.Q. Wang, R. Fritz, D. Kiener, J.Y. Zhang, G. Liu, O. Kolednik, R. Pippan, J. Sun
Publicado en: Acta Materialia, Edición 180, 2019, Página(s) 73-83, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2019.09.002

Recent advances in nanomechanical and in situ testing techniques: Towards extreme conditions

Autores: Daniel Kiener, Michael Wurmshuber, Markus Alfreider, Gerald J.K. Schaffar, Verena Maier-Kiener
Publicado en: Current opinion in solid state & materials science, Edición 27, 2023, Página(s) 101108, ISSN 1359-0286
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.cossms.2023.101108

Addressing Fracture Properties of Individual Constituents Within a Cu-WTi-SiOx-Si Multilayer

Autores: Markus Alfreider; Johannes Zechner; Daniel Kiener
Publicado en: JOM - Journal of Materials, Edición 72/12, 2020, Página(s) 4551–4558, ISSN 1543-1851
Editor: Springer
DOI: 10.1007/s11837-020-04444-6

In-situ observation of the initiation of plasticity by nucleation of prismatic dislocation loops

Autores: Subin Lee, Aviral Vaid, Jiseong Im, Bongsoo Kim, Arun Prakash, Julien Guénolé, Daniel Kiener, Erik Bitzek, Sang Ho Oh
Publicado en: Nature Communications, Edición 11/1, 2020, ISSN 2041-1723
Editor: Nature Publishing Group
DOI: 10.1038/s41467-020-15775-y

Achieving work hardening by forming boundaries on the nanoscale in a Ti-based metallic glass matrix composite

Autores: Jing Fan, Wei Rao, Junwei Qiao, P.K. Liaw, Daniel Şopu, Daniel Kiener, Jürgen Eckert, Guozheng Kang, Yucheng Wu
Publicado en: Journal of Materials Science & Technology, Edición 50, 2020, Página(s) 192-203, ISSN 1005-0302
Editor: Allerton Press Inc.
DOI: 10.1016/j.jmst.2020.02.036

Measurement of residual stresses in surrogate coated nuclear fuel particles using ring-core focussed ion beam digital image correlation

Autores: Alexander J. Leide, Thomas A. Haynes, Nassia Tzelepi, John Payne, Matthew Jordan, Steven Knol, Jan A. Vreeling, Mark Davies, David T. Goddard, Manuel J. Pfeifenberger, Markus Alfreider, Daniel Kiener, Dong Liu
Publicado en: Nuclear Materials and Energy, Edición 36, 2023, Página(s) 101470, ISSN 2352-1791
Editor: Elsevier Limited
DOI: 10.1016/j.nme.2023.101470

Extracting information from noisy data: strain mapping during dynamic in situ SEM experiments

Autores: M. Alfreider, M. Meindlhumer, V. Maier-Kiener, A. Hohenwarter, D. Kiener
Publicado en: Journal of Materials Research, Edición online, 2021, Página(s) 2291-2304, ISSN 0884-2914
Editor: Materials Research Society
DOI: 10.1557/s43578-020-00041-0

Neural Network Supported Microscale In Situ Deformation Tracking: A Comparative Study of Testing Geometries

Autores: Julius F. Keckes, Alexander Jelinek, Daniel Kiener, Markus Alfreider
Publicado en: JOM, Edición 76, 2024, Página(s) 2336-2351, ISSN 1047-4838
Editor: J O M Institute
DOI: 10.1007/s11837-024-06437-1

Data-mining of in-situ TEM experiments: Towards understanding nanoscale fracture

Autores: D. Steinberger, I. Issa, R. Strobl, P.J. Imrich, D. Kiener, S. Sandfeld
Publicado en: Computational Materials Science, Edición 216, 2023, Página(s) 111830, ISSN 0927-0256
Editor: Elsevier BV
DOI: 10.1016/j.commatsci.2022.111830

Novel Approach for Assessing Cyclic Thermomechanical Behavior of Multilayered Structures

Autores: Benjamin Seligmann, Markus Alfreider, Michael Wurmshuber, Daniel Kiener
Publicado en: Advanced Engineering Materials, Edición 25, 2023, Página(s) 2201209, ISSN 1438-1656
Editor: John Wiley & Sons Ltd.
DOI: 10.1002/adem.202201209

In-situ TEM investigation of toughening in Silicon at small scales

Autores: I. Issa, C. Gammer, S. Kolitsch, A. Hohenwarter, P.J. Imrich, R. Pippan, D. Kiener
Publicado en: Materials Today, Edición 48, 29, 2021, ISSN 1369-7021
Editor: Elsevier BV
DOI: 10.1016/j.mattod.2021.03.009

The influence of chemistry on the interface toughness in a WTi-Cu system

Autores: M. Alfreider, R. Bodlos, L. Romaner, D. Kiener
Publicado en: Acta Materialia, Edición 230, 117813, 2022, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2022.117813

Microscopic fracture toughness of notched porous sintered Cu micro-cantilevers for power electronics packaging

Autores: Dong Hu, Leiming Du, Markus Alfreider, Jiajie Fan, Daniel Kiener, Guoqi Zhang
Publicado en: Materials Science and Engineering: A, Edición 897, 2024, Página(s) 146316, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2024.146316

Nanoscale printed tunable specimen geometry enables high-throughput miniaturized fracture testing

Autores: Alexander Jelinek, Stanislav Žák, Megan J. Cordill, Daniel Kiener, Markus Alfreider
Publicado en: Materials and Design, Edición 234, 2023, Página(s) 112329, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2023.112329

Nanomechanical characterization

Autores: Daniel Kiener, Amit Misra
Publicado en: MRS Bulletin, Edición 49, 2024, Página(s) 214-223, ISSN 0883-7694
Editor: Materials Research Society
DOI: 10.1557/s43577-023-00643-z

Prospects of enhancing the understanding of material-hydrogen interaction by novel in-situ and in-operando methods

Autores: A. Massone, D. Kiener
Publicado en: International Journal of Hydrogen Energy, Edición 47, 17, 10097, 2022, ISSN 0360-3199
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ijhydene.2022.01.089

Effect of wire-arc directed energy deposition on the microstructural formation and age-hardening response of the Mg-9Al-1Zn (AZ91) alloy

Autores: Gloria Graf, Petra Spörk-Erdely, Emad Maawad, Michael Burtscher, Daniel Kiener, Helmut Clemens, Thomas Klein
Publicado en: Journal of magnesium and alloys, Edición 11, 2023, Página(s) 1944, ISSN 2213-9567
Editor: Elsevier
DOI: 10.1016/j.jma.2023.05.012

Tuning mechanical properties of ultrafine-grained tungsten by manipulating grain boundary chemistry

Autores: M. Wurmshuber, S. Jakob, S. Doppermann, S. Wurster, R. Bodlos, L. Romaner, V. Maier-Kiener, D. Kiener
Publicado en: Acta Materialia, Edición 232, 117939, 2022, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2022.117939

"Special Issue ""Novel Structural and Functional Material Properties Enabled by Nanocomposite Design"""

Autores: J. Eckert, D. Kiener
Publicado en: Nanomaterials, Edición 13, 2023, Página(s) 586, ISSN 2079-4991
Editor: MDPI
DOI: 10.3390/nano13030586

Simultaneously increasing strength and ductility of nano-crystalline Cu-Zn-alloys made from powderous raw materials

Autores: Holub, Georg
Publicado en: -, Edición 1, 2023
Editor: Montanuniversität Leoben
DOI: 10.34901/mul.pub.2023.13

Enhanced mechanical performance of nanostructured metals through systematically modified interfaces

Autores: Wurmshuber, Michael
Publicado en: Edición 2, 2022
Editor: Montanuniveristät Leoben
DOI: 10.34901/mul.pub.2023.96

Analysis of the strain information from nanodiffraction data

Autores: Lukas Schretter
Publicado en: Master thesis, 2021
Editor: Montanuniversität Leoben

Linking Macroscopic Fracture Properties to Single Dislocation Processes

Autores: I. Issa, M. Alfreider, D. Kozic, O. Kolednik, S. Sandfeld, D. Kiener
Publicado en: Microscopy and Microanalysis, Edición 24/S1, 2018, Página(s) 2184-2185, ISSN 1431-9276
Editor: Cambridge Press
DOI: 10.1017/s1431927618011406

Novel Structural and Functional Material Properties Enabled by Nanocomposite Design

Autores: Jürgen Eckert, Daniel Kiener
Publicado en: 2023, Página(s) 216, ISBN 978-3-0365-6724-2
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/books978-3-0365-6725-9

Buscando datos de OpenAIRE...

Publicaciones

Compartir esta página Compartir esta página en las redes sociales

Descargar Descargar el contenido de la página