Seismic Testing of 3D Printed Miniature Masonry in a Geotechnical Centrifuge

Información del proyecto

MiniMasonryTesting

Identificador del acuerdo de subvención: 803908

DOI

10.3030/803908

Fecha de la firma de la CE 13 Septiembre 2018

Fecha de inicio 1 Abril 2019

Fecha de finalización 31 Marzo 2027

Financiado con arreglo a

• EXCELLENT SCIENCE - European Research Council (ERC)

Coste total

€ 1 999 477,00

Aportación de la UE

€ 1 999 477,00

Coordinado por

ETHNICON METSOVION POLYTECHNION
Greece

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Publicaciones

Conference proceedings (13)

Preliminary Centrifuge Tests on Unreinforced Masonry Buildings Built Using a Sand-Based 3D Printer

Autores: Elmorsy, Medhat; Katsamakas, Antonios; id_orcid0000-0001-9428-1787; Jones, Liam Alexander; id_orcid0000-0002-2509-8660; Brunschweiler, Eva; Anastasopoulos, Ioannis; Vassiliou, Michalis F.
Publicado en: 4th Asia-Pacific Conference on Physical Modelling in Geotechnics (ACPMG2024), 2024
Editor: International Society for Soil Mechanics and Geotechnical Engineering
DOI: 10.3929/ethz-b-000716945

Re-using tennis balls as low-cost seismic isolation devices: Experimental Investigation

Autores: Katsamakas, Antonios A.; Chollet, Miro; Eyyi, Stefan; Vassiliou, Michalis F.
Publicado en: 3rd International Conference on Natural Hazards & Infrastructure (ICONHIC 2022), Athens, Greece, July 5–7, 2022, 2022
Editor: 3rd International Conference on Natural Hazards & Infrastructure (ICONHIC 2022), Athens, Greece, July 5–7, 2022
DOI: 10.3929/ethz-b-000557261

Shake-table testing of resilient rolling seismic isolators based on deformable rubber spheres

Autores: Katsamakas, Antonios; Vassiliou, Michalis F.
Publicado en: SECED 2023 Conference Proceedings, 2023
Editor: SECED
DOI: 10.3929/ethz-b-000632014

Shake-table testing of resilient, low-cost seismic isolators based on rolling rubber spheres

Autores: Katsamakas, Antonios A.; Vassiliou, Michalis F.
Publicado en: Proceedings of the 2023 New Zealand Society for Earthquake Engineering Annual Technical Conference, Edición 1, 2023
Editor: New Zealand Society for Earthquake Engineering
DOI: 10.3929/ethz-b-000610505

Experimental investigation of spherical rubber seismic isolation bearings

Autores: Katsamakas, Antonios A.; Belser, Gabriel; Vassiliou, Michalis F.; Blondet, Marcial; Stojadinovic, Bozidar; id_orcid0000-0002-1713-1977
Publicado en: COMPDYN 2021 8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, streamed from Athens, Greece, 27–30 June 2021, Edición 1, 2021
Editor: COMPDYN 2021
DOI: 10.3929/ethz-b-000491978

Lateral cyclic response of deformable rolling seismic isolators for low-income countries

Autores: Katsamakas, Antonios A.; Vassiliou, Michalis F.
Publicado en: Proceedings of the Third European Conference on Earthquake Engineering and Seismology – 3ECEES, 2022
Editor: 3ECEES
DOI: 10.3929/ethz-b-000570039

SHAKE-TABLE TESTING OF LOW-COST, HIGH-PERFORMANCE SEISMIC ISOLATORS BASED ON ROLLING RUBBER SPHERES

Autores: Antonios A. Katsamakas; Michalis F. Vassiliou
Publicado en: COMPDYN Proceedings, 2023
Editor: COMPDYN
DOI: 10.7712/120123.10620.20718

Finite element modeling of the shake-table response of a bridge-like model comprising rocking columns

Autores: Katsamakas, Antonios A.; Vassiliou, Michalis F.
Publicado en: COMPDYN 2023, 2023
Editor: COMPDYN
DOI: 10.3929/ethz-b-000615846

Experimental Investigation of a Sustainable Seismic Isolation System Based on Used Tennis Balls

Autores: Katsamakas, Antonios A.; Bosshart, Delia; Flury, Cédric; Schär, Raphael; Vassiliou, Michalis F.
Publicado en: 17th World Conference on Earthquake Engineering (WCEE 2020-21), Sendai, Japan, September 27 - October 2, 2021, 2021
Editor: 17th World Conference on Earthquake Engineering (WCEE 2020-21), Sendai, Japan, September 27 - October 2, 2021
DOI: 10.3929/ethz-b-000507042

Finite element modeling of the seismic response of a bridge-like model with restrained rocking piers

Autores: Katsamakas, Antonios; id_orcid0000-0001-9428-1787; Vassiliou, Michalis F.
Publicado en: 18th World Conference on Earthquake Engineering (WCEE 2024)., 2024
Editor: 18th World Conference on Earthquake Engineering (WCEE 2024)

Experimental study of grout-filled, reused tennis balls as seismic isolation bearings for lightweight structures

Autores: Katsamakas, Antonios; id_orcid0000-0001-9428-1787; Del Giudice, Lorenzo; id_orcid0000-0002-1565-0538; Vassiliou, Michalis F.
Publicado en: 18th World Conference on Earthquake Engineering (WCEE 2024), 2024
Editor: 18th World Conference on Earthquake Engineering (WCEE 2024)

Low-cost and sustainable seismic isolation with re-used tennis balls: Lateral cyclic tests

Autores: Katsamakas, Antonios A.; Chollet, Miro; Eyyi, Stefan; Vassiliou, Michalis F.
Publicado en: Proceedings of the Third European Conference on Earthquake Engineering and Seismology – 3ECEES, 2022
Editor: 3ECEES
DOI: 10.3929/ethz-b-000570047

Shake-table testing of low-cost seismic isolation bearings based on rolling rubber spheres

Autores: Katsamakas, Antonios A.; Belser, Gabriel; Vassiliou, Michalis F.; Stojadinovic, Bozidar; Blondet, Marcial
Publicado en: 3rd International Conference on Natural Hazards & Infrastructure (ICONHIC 2022), Athens, Greece, July 5–7, 2022, 2022
Editor: 3rd International Conference on Natural Hazards & Infrastructure (ICONHIC 2022), Athens, Greece, July 5–7, 2022
DOI: 10.3929/ethz-b-000557275

Peer reviewed articles (10)

Shake table testing and finite element modeling of a modular prefabricated concrete bridge‐like specimen accounting for geometry imperfections and additional damping

Autores: Antonios A. Katsamakas, Michalis F. Vassiliou, Charalampos Mouzakis
Publicado en: Earthquake Engineering & Structural Dynamics, Edición 53, 2025, Página(s) 3607-3629, ISSN 0098-8847
Editor: John Wiley & Sons Inc.
DOI: 10.1002/eqe.4189

Experimental and numerical assessment of grout-filled tennis balls as seismic isolation bearings

Autores: Antonios A. Katsamakas, Lorenzo Del Giudice, Sergio I. Reyes, Dario Candebat-Sanchez, Michalis F. Vassiliou
Publicado en: Engineering Structures, 2023, ISSN 0141-0296
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.engstruct.2023.116716

Experimental investigation of a spherical rubber isolator for use in low income countries

Autores: Antonios A. Katsamakas, Gabriel Belser, Michalis F. Vassiliou, Marcial Blondet
Publicado en: Engineering Structures, Edición 250, 2022, Página(s) 113522, ISSN 0141-0296
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.engstruct.2021.113522

Global sensitivity analysis of 3D printed material with binder jet technology by using surrogate modeling and polynomial chaos expansion

Autores: Lorenzo Del Giudice; Stefano Marelli; Bruno Sudret; Michalis F. Vassiliou
Publicado en: Progress in Additive Manufacturing, 2023, ISSN 2363-9512
Editor: Springer
DOI: 10.1007/s40964-023-00459-y

A simple strategy to tune the lateral response of unbonded Fiber Reinforced Elastomeric Isolators (FREIs)

Autores: Chris Tran, Andrea Calabrese, Michalis F. Vassiliou, Simone Galano
Publicado en: Engineering Structures, Edición 222, 2020, Página(s) 111128, ISSN 0141-0296
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.engstruct.2020.111128

Feasibility Study on Re-Using Tennis Balls as Seismic Isolation Bearings

Autores: Antonios A. Katsamakas, Miro Chollet, Stefan Eyyi, Michalis F. Vassiliou
Publicado en: Frontiers in Built Environment, Edición 7, 2021, ISSN 2297-3362
Editor: Nature Publishing Group
DOI: 10.3389/fbuil.2021.768303

Experimental Parametric Study and Phenomenological Modeling of a Deformable Rolling Seismic Isolator

Autores: Antonios A. Katsamakas; Michalis F. Vassiliou
Publicado en: Journal of Earthquake Engineering, Edición 1, 2023, ISSN 1363-2469
Editor: Imperial College Press
DOI: 10.1080/13632469.2023.2189978

Physical modelling of unreinforced masonry walls using a sand-based 3D printer

Autores: Lorenzo Del Giudice, Antonios Katsamakas, Bowen Liu, Vasilis Sarhosis, Michalis F. Vassiliou
Publicado en: Engineering Structures, Edición 305, 2025, Página(s) 117665, ISSN 0141-0296
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.engstruct.2024.117665

Influence of Wall Thickness on Microstructure  and Mechanical Properties of Thin-Walled 316l Stainless Steel Produced by Laser Powder Bed Fusion

Autores: Rafal Wrobel, Lorenzo Del Guidice, P. Gh Ghanbari, Nerea Abando, Xavier Maeder, Michalis F. Vassiliou, Ehsan Hosseini, Ralph Spolenak, Christian Leinenbach
Publicado en: Materials & Design, 2023, ISSN 1873-4197
Editor: Elsevier
DOI: 10.2139/ssrn.4576849

Mechanical properties of 3D printed material with binder jet technology and potential applications of additive manufacturing in seismic testing of structures

Autores: Lorenzo Del Giudice, Michalis F. Vassiliou
Publicado en: Additive Manufacturing, 2020, Página(s) 101714, ISSN 2214-8604
Editor: Elsevier BV
DOI: 10.1016/j.addma.2020.101714

Thesis and dissertations (1)

Physical modelling of masonry and reinforced concrete using 3D printing

Autores: Del Giudice, Lorenzo; id_orcid0000-0002-1565-0538
Publicado en: Edición 1, 2023
Editor: ETH Zurich