Multiscale Analysis of Thermomechanical Behaviour of Granular Materials

Información del proyecto

MatheGram

Identificador del acuerdo de subvención: 813202

DOI

10.3030/813202

Proyecto cerrado

Fecha de la firma de la CE 30 Agosto 2018

Fecha de inicio 1 Enero 2019

Fecha de finalización 30 Junio 2023

Financiado con arreglo a

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Coste total

€ 4 170 178,08

Aportación de la UE

€ 4 170 178,08

Coordinado por

UNIVERSITY OF SURREY
United Kingdom

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (14)

Report on thermal effect on microstructure change during sintering

Report on thermal effect on microstructure change during capillary driven sintering

Report on modelling heat generation due to chemical reaction
Report on DEM modelling of heat generation induced by biological activity
15 reports on public engagement activity by ESRs
Report on thermal effect on micromechanics of materials
Report on regulating heat transfer using granular layers
Report on DEM modelling of heat transfer and validated against experiment
Report on FEM modelling of heat generation due to deformation
Report on dry powder coating on selected composites at T<120 degrees C

Report on production of thin and smooth films on selected composites at temperatures < 120 °C

Report on constrained sintering using in-situ nCT and DEM

Report on constrained sintering using insitu nCT and DEM

Validated DEM code for modelling heat generation due to friction
Report on thermal effect on flowability of granular materials

Report on thermal effect on flowability of granular materials for additive manufacturing

Report on thermal effect on rheology of granular suspension
Report on identification of optimal manufacturing conditions for SLS

Report on identification of optimal manufacturing conditions and materials for selective laser sintering

Other (5)

7 Network wide training events completed
Publications and newsletters

Publications: 30 peer reviewed publications; 45 technical reports; 15+ international conference presentations, one public engagement video; 15 public engagement reports; 2 position articles; 3 newsletters

2 special interest symposium proceedings
New open access DEM software published
DEM software implemented with all heat generation and transfer models

Websites, patent fillings, videos etc. (1)

15 public engagement activities completed

15 public engagement activities completed with delivery materials retained for future use

Publicaciones

Peer reviewed articles (19)

Predictions of the P1 approximation for radiative heat transfer in heterogeneous granular media

Autores: Jelena Mačak, Christoph Goniva, Stefan Radl
Publicado en: Particuology, Edición January 2023, 2023, ISSN 0346-251x
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.partic.2023.01.003

3D analysis of ceramic powder sintering by synchrotron X-ray nano-tomography

Autores: A M Venkatesh, D Bouvard, P Lhuissier and J Villanova
Publicado en: Journal of the European Ceramic Society, Edición Volume 43, Edición 6, 2023, Página(s) 2553-2563, ISSN 0955-2219
Editor: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2022.12.065

Multiscale modelling of flow, heat transfer and swelling during thermo-mechanical treatment of starch suspensions

Autores: Arnesh Palanisamy,Marco Ramaioli,Paul Menut,Artemio Plana-Fattori,Denis Flick
Publicado en: Food Structure, Edición Vol 29, 2021, ISSN 2213-3291
Editor: Elsevier BV
DOI: 10.1016/j.foostr.2021.100211

Heat generation during oblique particle impact

Autores: F. Kisuka, C. Hare and C. Wu
Publicado en: Powder Technology, Edición Volume 422, 15 May 2023, 2023, Página(s) 118481, ISSN 0032-5910
Editor: Elsevier BV
DOI: 10.1016/j.powtec.2023.118481

Review on modeling techniques for powder bed fusion processes based on physical principles

Autores: Balaji Soundararajan, Daniele Sofia, Diego Barletta, Massimo Poletto
Publicado en: Additive Manufacturing, Edición 47, 2021, Página(s) 102336, ISSN 2214-8604
Editor: Elsevier BV
DOI: 10.1016/j.addma.2021.102336

Exploiting DEM to Link Thermal Conduction and Elastic Stiffness in Granular Materials

Autores: Morimoto, T, O'Sullivan, C, Taborda, D
Publicado en: Journal of Engineering Mechanics, Edición issue 2 vol 148, 2021, ISSN 0733-9399
Editor: American Society of Civil Engineers
DOI: 10.1061/(asce)em.1943-7889.0002054

Dataset of the temperature rise during granular flows in a rotating drum

Autores: R. Rangel, F. Kisuka, C. Hare, V. Vivacqua, A. Franci, E. Oñate and C. Wu
Publicado en: Data in Brief, Edición Volume 48, June 2023, 2023, Página(s) 109282, ISSN 2352-3409
Editor: Elsevier BV
DOI: 10.1016/j.dib.2023.109282

Regimes of subsonic compressible flow in gas-particle systems

Autores: Jelena Mačak, Christoph Goniva, Stefan Radl
Publicado en: Powder Technology, Edición 394, 2021, Página(s) 44-61, ISSN 0032-5910
Editor: Elsevier BV
DOI: 10.1016/j.powtec.2021.08.017

Grain growth in sintering: A discrete element model on large packings

Autores: Brayan Paredes-Goyes, David Jauffres, Jean-Michel Missiaen, Christophe L. Martin
Publicado en: Acta Materialia, Edición 218, 2021, Página(s) 117182, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2021.117182

Experimental investigation of heat generation during granular flow in a rotating drum using infrared thermography

Autores: R. Rangel, F. Kisuka, C. Hare, V. Vivacqua, A. Franci, E. Oñate and C. Wu
Publicado en: Powder Technology, Edición Volume 426, 1 August 2023, 2023, Página(s) 118619, ISSN 0032-5910
Editor: Elsevier BV
DOI: 10.1016/j.powtec.2023.118619

The Set Up of an Experimental Testing Rig to Measure Time and Space Temperature Profiles in Laser Sintering of Polymeric Powders

Autores: Balaji Soundararajan, Daniele Sofiaa, Diego Barletta, Massimo Poletto
Publicado en: CHEMICAL ENGINEERING TRANSACTIONS, Edición VOL. 86, 2021, ISSN 2283-9216
Editor: The Italian Association of Chemical Engineering
DOI: 10.3303/cet2186131

Critical appraisal of pore network models to simulate fluid flow through assemblies of spherical particles

Autores: T Morimoto, B. Zhao D. M.G.Taborda and C O'Sullivan
Publicado en: Computers and Geotechnics, Edición 150, 2022, Página(s) 104900, ISSN 0266-352X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compgeo.2022.104900

Capturing particle-fluid heat transfer in thermo-hydro-mechanical analyses using DEM coupled with a pore network model

Autores: T. Morimoto, C. O'Sullivan and D. Taborda
Publicado en: Powder Technology, Edición Volume 429, 1 November 2023, 2023, Página(s) 118944, ISSN 0032-5910
Editor: Elsevier BV
DOI: 10.1016/j.powtec.2023.118944

DEM analysis of swelling behaviour in granular media

Autores: D Braile, C Hare, and C Wu
Publicado en: Advanced Powder Technology, Edición Volume 33, Edición 11, 103806, 2022, ISSN 0921-8831
Editor: Elsevier BV
DOI: 10.1016/j.apt.2022.103806

Flow behaviour of zeolite powders at high process temperatures

Autores: S Z Ajabshir, C Gucuyener, V Vivacqua, D Gobby, H Stitt, D Barletta and M Poletto
Publicado en: Powder Technology, Edición Volume 409, 2022, Página(s) 117818, ISSN 0032-5910
Editor: Elsevier BV
DOI: 10.1016/j.powtec.2022.117818

Determination of the mechanical properties of gelatinized starch granule from bulk suspension characterization

Autores: Arnesh Palanisamy, Gabrielle Moulin, Marco Ramaioli, Artemio Plana-Fattori, Denis Flick & Paul Menut
Publicado en: Rheologica Acta, 2022, ISSN 0035-4511
Editor: Springer Verlag
DOI: 10.1007/s00397-022-01325-4

Two-step sintering of alumina nano-powders: A discrete element study

Autores: B. Paredes-Goyes, A. M. Venkatesh, D. Jauffres and C. L. Martin
Publicado en: Journal of the European Ceramic Society, Edición Volume 43, Edición 2, 2023, Página(s) 501-509, ISSN 0955-2219
Editor: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2022.10.001

Kinetic modelling of individual starch granules swelling

Autores: Arnesh Palanisamy, François Deslandes, Marco Ramaioli, Paul Menut, Artemio Plana-Fattori, Denis Flick
Publicado en: Food Structure, Edición 26, 2020, Página(s) 100150, ISSN 2213-3291
Editor: Elsevier BV
DOI: 10.1016/j.foostr.2020.100150

Experimental metrics of the powder layer quality in the selective laser sintering process

Autores: Lupo, Marco; Zinatlou Ajabshir, Sina; Sofia, Daniele; Barletta, Diego; Poletto, Massimo
Publicado en: Powder Technology, Edición 1, 2023, Página(s) 118346, ISSN 0032-5910
Editor: Elsevier BV
DOI: 10.1016/j.powtec.2023.118346

Conference proceedings (8)

A systematic approach for conducting and interpreting hydraulic conductivity tests on granular soils under non-isothermal conditions

Autores: M S Bortolotto, D Taborda, and C O'Sullivan
Publicado en: Proceedings of the 8th International Symposium on Deformation Characteristics of Geomaterials, 2023
Editor: ISSMGE

Thermal effects on the hydraulic conductivity of a granular geomaterial

Autores: M S Bortolotto, D M G Taborda, and C O’Sullivan
Publicado en: Proceedings of the 20th International Conference on Soil Mechanics and Geotechnical Engineering, Edición Vol 2, General, 2022
Editor: ICSMGE

Experimental and numerical study of heat generation by energy dissipation in a rotating drum filled with particulate material

Autores: R.L. Rangel, F. Kisuka, C.Y. Wu, C. O’Sullivan, A. Franci and E. Oñate
Publicado en: Proceedings of the XLIII Ibero-Latin-American Congress on Computational Methods in Engineering, Edición n. 10659, 2022
Editor: CILAMCE, ABMEC

Friction-induced heat generation between two particles

Autores: Francisco Kisuka1, Chuan-Yu Wu1, and Colin Hare
Publicado en: Powders & Grains 2021 – 9th International Conference on Micromechanics on Granular Media, Edición Volume 249, 2021, 2021
Editor: EPJ-WoC
DOI: 10.1051/epjconf/202124905007

TRANSIENT DEM SIMULATION OF STARCH GRANULE SUSPENSION UNDERGOING THERMAL TREATMENT

Autores: A. Palanisamy, A. Plana-Fattori, P. Menut, M. Ramaioli, D. Flick
Publicado en: Proceedings of 11th FOODSIM'2020 Conference, Edición September 6-10, 2020, 2020
Editor: EUROSIS-ETI

DEM modelling of swelling of grains

Autores: Domenica Braile, Colin Hare and Chuan-Yu Wu
Publicado en: Powders & Grains 2021 – 9th International Conference on Micromechanics on Granular Media, Edición Volume 249, 2021, 2021
Editor: EPJ Web Conf.
DOI: 10.1051/epjconf/202124914011

Thermo-mechanical analysis of continuous and discrete media with PFEM and DEM

Autores: R.L. Rangel, A. Franci, A. Cornejo, E. Oñate and F. Zárate
Publicado en: Proceedings of the joint CILAMCE-PANACM 2021, Edición n. 9552, 2021
Editor: ABMEC/IACM

Analytical and DEM studies of thermal stress in granular materials

Autores: Tokio Morimoto, Catherine O’Sullivan and David M. G. Taborda
Publicado en: Powders & Grains 2021 – 9th International Conference on Micromechanics on Granular Media, Edición Vol 249, 2021, ISSN 2100-014X
Editor: EDP Sciences
DOI: 10.1051/epjconf/202124914018