European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS

Innovative, low cost, low weight and safe floating wind technology optimized for deep water wind sites

Descripción del proyecto

Optimizar parques eólicos flotantes en aguas profundas

Instalar, operar y mantener turbinas eólicas marinas se vuelve más difícil y caro a medida que aumenta la profundidad del agua. El proyecto FLOTANT, financiado con fondos europeos, tiene como objetivo construir y demostrar un modelo a escala de una plataforma marina flotante como soporte para una turbina eólica en aguas profundas. Los componentes recién diseñados incluirán una plataforma híbrida de plástico y hormigón, sistemas de anclaje y amarres optimizados, cables eléctricos ligeros de altas prestaciones y un sistema de monitorización de alta tecnología para el funcionamiento y el mantenimiento. El proyecto seguirá evaluando detenidamente el impacto social, medioambiental, económico y tecnológico de la plataforma flotante. En última instancia, contribuirá al avance de las tecnologías renovables y se prevé que reducirá futuros gastos operativos y de capital en más de un 50 %.

Objetivo

Many elements of an offshore wind farm become more expensive as depth increases: mooring, anchoring and dynamic cables are the most obvious. However, deep water areas also pose additional challenges for installation and O&M strategies. FLOTANT project aims to develop an innovative and integrated Floating Offshore Wind solution, optimized for deep waters (100-600m) and to sustain a 10+MW wind turbine generator, composed by: a mooring and anchoring system using high performance polymers and based on Active Heave Compensation to minimise excursions, a hybrid concrete-plastic floater and a power export system with long self-life and low-weight dynamic cables. The project includes enhanced O&M strategies, sensoring, monitoring and the evaluation of the techno-economic, environmental, social and socio-economic impacts.

The prototypes of the novel mooring, anchoring and dynamic cable components, and a scaled model of the hybrid offshore wind floating platform will be tested and validated within the scope of the project. Three relevant environments have been selected to perform the tests: MARIN basin for global performance under controlled conditions; the Dynamic Marine Component Test facility (DMaC-UNEXE) for large scale prototypes tests; and PLOCAN Marine Test Site, for the characterisation of novel materials under real seawater conditions.

An expected 60% reduction in CAPEX and 55% in the OPEX by 2030 will be motivated by FLOTANT novel developments including additional sectorial reductions due to external technology improvements. Overall FLOTANT solution, will allow an optimisation of LCOE reaching values in the range of 85-95 €/MWh by 2030.

Convocatoria de propuestas

H2020-LC-SC3-2018-2019-2020

Consulte otros proyectos de esta convocatoria

Convocatoria de subcontratación

H2020-LC-SC3-2018-RES-TwoStages

Régimen de financiación

RIA - Research and Innovation action

Coordinador

CONSORCIO PARA EL DISENO, CONSTRUCCION, EQUIPAMIENTO Y EXPLOTACION DE LA PLATAFORMA OCEANICA DE CANARIAS
Aportación neta de la UEn
€ 321 636,25
Dirección
CARRETERA DE TALIARTE
35200 Telde
España

Ver en el mapa

Región
Canarias Canarias Gran Canaria
Tipo de actividad
Public bodies (excluding Research Organisations and Secondary or Higher Education Establishments)
Enlaces
Coste total
€ 321 636,25

Participantes (16)