Skip to main content

Flexible Optical Injection Moulding of optoelectronic devices

Deliverables

On-line training material

A version of the training material excluding confidential information will be made available online to ensure training opportunities are widely available for EU workforce

FLOIM Website

FLOIM Website including public website, to be updated every three months, and a private members area.

FLOIM Workshop

A final seminar will be organised and webcast by the end of the project

Report on functional optical characterization

This report will describe the functionality features to be analysed of the manufactured component and the developed methodologies for the complete optical evaluation in an off-line environment.

Communication kit

This communication kit will be provided to the European Commission at the beginning of the project D89a M6 with updates at midterm D89b M26 and at the end D89c M42

Benchmarking analysis

Compilation of metrics and the available information on the performance of existing and competing technologies used in production. This deliverable summarizes the analysis carried on T1.2.

Publications

Nanometric measurement of microcavity filling during polymer injection moulding using

Author(s): M. Fazeli Jadidi; G. L. W. Cross (ADAMA)
Published in: Microelectronic Engineering, 00000000, 2022, ISSN 0000-0000
Publisher: SSRN
DOI: 10.2139/ssrn.4074442

Femtosecond laser fabrication of monolithic double volume phase-gratings in glass

Author(s): J. J. Azkona, M. Gómez-Aranzadi, A. Rodriguez, T. Morlanes, J. L. de la Peña, S. M. Olaizola
Published in: Optics Express, 28/20, 2020, Page(s) 29054, ISSN 1094-4087
Publisher: Optical Society of America
DOI: 10.1364/oe.402275

In Situ Detection of Interfacial Flow Instabilities in Polymer Co-Extrusion Using Optical Coherence Tomography and Ultrasonic Techniques

Author(s): A.Hammer; W.Roland; M. Zacher; B. Praher; G. Hannesschläger; B. Löw-Baselli; G. Steinbichler (RECENDT)
Published in: Polymers, 20734360, 2021, Page(s) 1-26, ISSN 2073-4360
Publisher: MDPI
DOI: 10.3390/polym13172880

Development of a fiber-optic based metrology for nano/microscale mold filling.

Author(s): Majid Fazeli (ADAMA).
Published in: Poster at 18th International Conference on Nanoimprint and Nanoprint Technologies (NNT) 2019, 14-16 October 2019, 2019
Publisher: NNT 2019

In-mould measurement with optical coherence tomography for compensating positioning error in injection overmoulding of optoelectronic devices

Author(s): G. Hannesschläger; M. Schwarze; E. Leiss-Holzinger; C. Rankl (FRAUNHOFER)
Published in: euspen’s 22nd International Conference & Exhibition, 2022
Publisher: EUSPEN

Manufacturing of functional surfaces by replicating glass moulds structured by multiphoton polymerization

Author(s): Vidal, S. M.; Gontad, F.; Otero, N.; Ares, F.; Coto, I.; Delgado, T.; Romero, P. (AIMEN)
Published in: Conference Proceedings of Lasers in Manufacturing Conference 2021, 2021, Page(s) N/A
Publisher: Lasers in Manufacturing – LiM 2021

Femtosecond laser fabrication of nanoscale geometries on inserts to manufacture surface-relief phase gratings through injection moulding.

Author(s): Gomez-Aranzadi, M.; Matey, L; , T. Morlanes, J. L. de la Peña, and S. M. Olaizola (CEIT, FAGOR)
Published in: Poster - XVI Workshop in Micro and Nanosystems and IBERNAM - Spanish network in Micro and Nanosystems, Annual Assembly, 7-8 November 2019, 2019
Publisher: IBERNAM

Micro-replication of high precision optically enhanced moulds fabricated by multiphoton polymerization

Author(s): Vidal, S. M.; Ares, F.; Coto, I; Gontad, F.; Delgado, T.; Romero, P.; Otero, N. (AIMEN)
Published in: Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2021
Publisher: Euspen

Micro-patterned features for injection molding process and its optical quality control.

Author(s): Majid Fazeli (ADAMA)
Published in: Poster at Polymer Replication on Nanoscale (PRN) conference., 9-10 may 2019, 2019
Publisher: PRN 2019

Use of Multiphoton Polymerization for replication of optically functional surfaces

Author(s): Otero, N.; Vidal, S.; Ares, F.; Coto, I.; Gontad, F.; Delgado, T.; Romero, P. (AIMEN)
Published in: Conference Proceedings of 2nd International Symposium on Laser Precision Microfabrication - LPM2020, 2020
Publisher: Journal of Laser Micro / Nanoengineering

Mould integrated mechatronic fixture for error compensation in injection over-moulding of optoelectronic devices

Author(s): Rentzsch, H.; Perz, S.; Schwarze, M. (FRAUNHOFER)
Published in: Conference Proceedings of EUSPEN’s 20th International Conference & Exhibition, 2020
Publisher: EUSPEN

Manufacturing of moulds by multiphoton polymerization for micro-replication of optically enhanced surfaces

Author(s): Otero, N.; Vidal, S.; Ares, F.; Coto, I.; Gontad, F.; Delgado, T. (AIMEN)
Published in: Conference Proceedings of SPIE Photonics West 2020, 2 March 2020, 2020, ISSN 0277-786X
Publisher: SPIE
DOI: 10.1117/12.2549961

Femtosecond laser fabrication of nanoscale geometries on inserts to manufacture surface-relief phase gratings through injection moulding

Author(s): Gomez-Aranzadi, M.; Matey, L; , T. Morlanes, J. L. de la Peña, and S. M. Olaizola (CEIT, FAGOR)
Published in: 2021
Publisher: 22nd International Symposium on Laser Precision Microfabrication

High-performance materials and processes optimised for flexible displays and other OTFT applications.

Author(s): May Wheeler (FLEXENABLE)
Published in: 2021
Publisher: innoLAE

D1.2 Benchmarking analysis

Author(s): Noemí Domínguez Álvarez (SNELL)
Published in: FLOIM Website & ZENODO Community, 31 May 2019, 2019, ISSN 0000-0000
Publisher: Zenodo

D4.2 Report on functional optical characterization.

Author(s): Carles Pizarro (UPC).
Published in: FLOIM Website & ZENODO Community, 23 April 2020, 2020, ISSN 0000-0000
Publisher: Zenodo
DOI: 10.5281/zenodo.4701281