Process Simulation and Tool Compensation Methodology for High Temperature Composite Processes

Informations projet

ProTHiC

N° de convention de subvention: 821019

DOI

10.3030/821019

Projet clôturé

Date de signature de la CE 26 Octobre 2018

Date de début 1 Novembre 2018

Date de fin 31 Octobre 2021

Financé au titre de

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Coût total

€ 700 000,00

Contribution de l’UE

€ 700 000,00

Coordonné par

RISE SICOMP AB
Sweden

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Documents, reports (4)

Methods architecture and verification plan

A first proposal of a simulation assisted tool design process describing necessary input/output from each simulation step and how the data is communicated and stored. The validation parameters for the simulation models are described together with critical tool features that need to be verified.

Report on communication, dissemination and explotation actions

This document will report on the actual activities

Plan for communication, dissemination and exploitation of project results

This document will contain the plan of communication activities, a plan for dissemination of project results and a plan for exploitation of project results and handling of IP rights linked to project outputs.

Concurrent tool design process

The report includes a description of the material model preforming injection and curing feasibility analysis The tool compensation methodology is also described together with the necessary inputoutput from each simulation step and how the data is communicated and stored

Open Research Data Pilot (1)

Data management plan

A data management Plan DMP describes the data management life cycle for the data to be collected processed andor generated The DMP will include information on The handling of research data during after the end of the projectWhat data will be collected processed andor generatedWhich methodology standards will be appliedWhether data will be sharedmade open access andHow data will be curated preserved including after the end of the project

Publications

Peer reviewed articles (3)

Implementation of a viscoelastic material model to predict the compaction response of dry carbon fiber preforms

Auteurs: Dennis Bublitz, David Colin, Klaus Drechsler
Publié dans: Composites Part A: Applied Science and Manufacturing, 2021, ISSN 1359-835X
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2021.106718

Stress relaxation and strain recovery phenomena during curing and thermomechanical loading: Thermorheologically simple viscoelastic analysis

Auteurs: Sibin Saseendran, Daniel Berglund, Janis Varna
Publié dans: Journal of Composite Materials, 2019, Page(s) 002199831984881, ISSN 0021-9983
Éditeur: SAGE Publications
DOI: 10.1177/0021998319848818

Viscoelastic model with complex rheological behavior (VisCoR): incremental formulation

Auteurs: Sibin Saseendran, Daniel Berglund, Janis Varna
Publié dans: Advanced Manufacturing: Polymer & Composites Science, 2019, Page(s) 1-16, ISSN 2055-0340
Éditeur: Taylor & Francis
DOI: 10.1080/20550340.2019.1709010