High-Power Ultrafast LaSErs using Tapered Double-Clad Fibre

Información del proyecto

PULSE

Identificador del acuerdo de subvención: 824996

DOI

10.3030/824996

Proyecto cerrado

Fecha de la firma de la CE 24 Octubre 2018

Fecha de inicio 1 Enero 2019

Fecha de finalización 31 Marzo 2024

Financiado con arreglo a

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Information and Communication Technologies (ICT)

Coste total

€ 5 206 207,50

Aportación de la UE

€ 5 206 207,50

Coordinado por

TAMPEREEN KORKEAKOULUSAATIO SR
Finland

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (10)

T-DCF laser system 1- 10 ps pulses

T-DCF laser system delivering a) output power of 500 - 2500W, rep rate of 10 100 MHz for 100-200 fs pulses and b) output power of 500 - 2500W, rep rate of 100 MHz 1GHz for 1- 10 ps pulses

3D injection mould micro-processing

Report on 3D injection mould micro-processing on both mm and m scale. Transfer of target texture to model workpiece at 1 mm2/s

T-DCF control system

T-DCF control system enabling control of laser output parameters a) output power of 100-500W, rep rate of 10 – 100 MHz for 100 fs pulses and b) output power of 100-500W, rep rate of 100 MHz – 1GHz for 1 - 10 ps pulses

4x voxel elongation optics

Beam shaping optics providing 4x elongation of voxel at the workpiece

Beam combining optics

Beam combining optics enabling coherent combination of 5 x 500W ultrafast pulse lasers

Delivery fiber cable

Delivery fiber cable operating stably at 2.5kW average power and 100-200 fs pulses

ML Semiconductor seed laser

ML Semiconductor seed laser @ 1040 nm, 100mW, 1-10ps, up to 1GHz with lifetime > 2000 hours

Parameters for stretcher and compressor

Specified parameters for stretcher and compressor to achieve 100fs pulses

ML fiber seed laser

ML fiber seed laser @ 1040 nm, 5 mW, 100 fs, >10MHz with lifetime more 2000 hours.

GS Semiconductor seed laser

GS Semiconductor seed laser @ 1040 nm, 100mW, 10-20ps, up to 1GHz with lifetime > 2000 hours

Demonstrators, pilots, prototypes (3)

T-DCF laser 100-500W 1-10ps

T-DCF laser delivering a) output power of 100-500W, rep rate of 10 100 MHz for 100 fs pulses and b) output power of 100-500W, rep rate of 100 MHZ 1GHz for 1 - 10 ps pulses

Boron steel cutting demonstration

Report on Boron steel cutting demonstration at 100m/s with excellent cut quality (demonstration parts; size of cut within scan-field)

T-DCF amplifier

T-DCF amplifier delivering 500 W of optical power (tested with CW seed source)

Websites, patent fillings, videos etc. (2)

PULSE video

Video Presentation of the PULSE project

Showcase workshop at LUNOVU

Industrial laser processing showcase workshop at LUNOVU

Publicaciones

Peer reviewed articles (4)

Picosecond Yb-doped tapered fiber laser system with 1.26 MW peak power and 200 W average output power

Autores: Andrey Petrov, Maxim Odnoblyudov, Regina Gumenyuk, Lidiya Minyonok, Andrey Chumachenko, Valery Filippov
Publicado en: Scientific Reports, Edición 10/1, 2020, Página(s) 17781, ISSN 2045-2322
Editor: Nature Publishing Group
DOI: 10.1038/s41598-020-74895-z

High laser induced damage threshold photoresists for nano-imprint and 3D multi-photon lithography

Autores: Elmina Kabouraki, Vasileia Melissinaki, Amit Yadav, Andrius Melninkaitis, Konstantina Tourlouki, Theodoros Tachtsidis, Nikolaos Kehagias, Georgios D. Barmparis, Dimitris G. Papazoglou, Edik Rafailov, Maria Farsari
Publicado en: Nanophotonics, Edición 0/0, 2021, Página(s) 1-10, ISSN 2192-8614
Editor: De Gruyter
DOI: 10.1515/nanoph-2021-0263

Low-autofluorescence, transparent composite for multiphoton 3D printing

Autores: George Flamourakis, Antonis Kordas, Georgios D. Barmparis, Anthi Ranella, Maria Farsari
Publicado en: Optical Materials Express, Edición 11/3, 2021, Página(s) 801, ISSN 2159-3930
Editor: Optical Society of America
DOI: 10.1364/OME.418269

Design guidelines for ultrashort pulse generation by a Mamyshev regenerator

Autores: Mikko Närhi, Andrei Fedotov, Kseniia Aksenova, Julia Fiebrandt, Thomas Schönau, Mario Gerecke, Regina Gumenyuk
Publicado en: Optics Express, Edición 29/10, 2021, Página(s) 15699, ISSN 1094-4087
Editor: Optical Society of America
DOI: 10.1364/oe.422431

Other (1)

High-Power Ultrafast LaSErs using tapered double-clad fibre

Autores: Gumenyuk, Regina
Publicado en: Project Rpository Journal, Edición 4, 2020, Página(s) 126-127
Editor: http://www.europeandissemination.eu/

Conference proceedings (3)

PULSE: High-Power Ultrafast Lasers using Tapered Double-Clad Fibre

Autores: Hontzopoulos, Elias
Publicado en: Hallas Photonics Workshop, Edición 5, 2019
Editor: Hellas Photonics Group Workshop
DOI: 10.5281/zenodo.3630562

Large mode area double clad ytterbium tapered fiber with circular birefringency

Autores: Joona Rissanen, Andrei Fedotov, Teppo Noronen, Regina Gumenyuk, Yuri Chamorovskii, Alexander Kolosovskii, Victor Voloshin, Igor Vorobev, Maxim Odnoblyudov, Valery Filippov
Publicado en: Fiber Lasers XVI: Technology and Systems, 2019, Página(s) 75, ISBN 9781-510624375
Editor: SPIE
DOI: 10.1117/12.2508811

"Idtechex Europe 2019 – Invited Speech. Title ""Materials for Novel Components for The Car of The Future""."

Autores: Li Pira, Nello
Publicado en: Materials for Novel Components for The Car of The Future, Edición 2, 2019
Editor: Idtechex_Europe_2019
DOI: 10.5281/zenodo.3630304

Derechos de propiedad intelectual

Patent (3)

ACTIVE OPTICAL FIBER AND METHOD FOR FABRICATING AN ACTIVE OPTICAL FIBER

Número de solicitud/publicación: 08 805462
Fecha: 2008-09-29
Solicitante(s): AMPLICONYX OY

ACTIVE OPTICAL FIBER AND METHOD FOR FABRICATING AN ACTIVE OPTICAL FIBER

Número de solicitud/publicación: 08 805462
Fecha: 2008-09-29
Solicitante(s): AMPLICONYX OY

ACTIVE OPTICAL FIBER AND METHOD FOR FABRICATING AN ACTIVE OPTICAL FIBER

Número de solicitud/publicación: 08 805462
Fecha: 2008-09-29
Solicitante(s): AMPLICONYX OY