Objectif
The main objective of UltimateGaN is to safeguard Europe’s leading position in terms of power semiconductors and high performance RF applications by driving an innovative breakthrough change with the next generation of GaN-technologies. Several predecessor projects are the basis for the availability of the first generation of European based GaN-devices, also revealing that the challenges of these technologies have been heavily underestimated. This makes the high potential of GaN clearly evident to overcome the persisting threats of higher electric fields, current densities and power densities related to the necessity of device shrinkage.
The new concept of following a vertical approach to address research through the entire supply chain of technology, packaging, reliability and application will enable a significant improvement of efficiency that goes beyond the limits of silicon based semiconductors in combination with packages that fully utilize the shrink-path of power GaN devices and which are not ready as of today.
UltimateGaN’s unique approach addresses, among others, the following innovative applications with the scope to enable digitalisation and energy efficiency for 5G, Smart Grids and Smart Mobility that goes hand in hand with a significant reduction of the CO2 footprint:
•Extremely efficient server power supply enabling lower energy consumption in data centres
•Benchmark Photovoltaic inverters in terms of efficiency and size to foster the use of renewable energies
•Affordable 5G-Amplifiers up to mm-wave enabling a faster 5G rollout
•GaN powered LIDAR application to enable autonomous driving
•Highest efficiency µ-Grid-converters and On-Board Chargers
The global state-of-the-art first generation GaN devices are mainly based on US and Asian suppliers. Only a cooperative project like UltimateGaN with European market leaders and world-class researchers can take on the challenges and bring Europe at the forefront in terms of GaN enabled opportunities.
Champ scientifique
- engineering and technologyelectrical engineering, electronic engineering, information engineeringinformation engineeringtelecommunicationstelecommunications networksmobile network5G
- engineering and technologyenvironmental engineeringenergy and fuelsrenewable energy
- natural sciencesphysical scienceselectromagnetism and electronicssemiconductivity
- natural scienceschemical sciencesinorganic chemistrymetalloids
Mots‑clés
Programme(s)
Appel à propositions
H2020-ECSEL-2018-2-RIA-two-stage
Voir d’autres projets de cet appelSous appel
H2020-ECSEL-2018-2-RIA-two-stage-1
Régime de financement
RIA - Research and Innovation actionCoordinateur
9500 Villach
Autriche
Voir sur la carte
Participants (26)
4643 Pettenbach
Voir sur la carte
8010 Graz
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
8010 Graz
Voir sur la carte
8700 Leoben
Voir sur la carte
3001 Leuven
Voir sur la carte
52134 Herzogenrath
Voir sur la carte
85579 Neubiberg
Voir sur la carte
81677 Munchen
Voir sur la carte
40237 Dusseldorf
Voir sur la carte
80686 Munchen
Voir sur la carte
09111 Chemnitz
Voir sur la carte
01187 DRESDEN
Voir sur la carte
35122 Padova
Voir sur la carte
20127 Milano
Voir sur la carte
20126 MILANO
Voir sur la carte
3036 Drammen
Voir sur la carte
81243 Bratislava
Voir sur la carte
811 04 Bratislava
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
1015 Lausanne
Voir sur la carte
1015 Lausanne
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
20500 Mondragon
Voir sur la carte
50197 Zaragoza
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
43800 Valls
Voir sur la carte
501 15 Boras
Voir sur la carte
Entité juridique autre qu’un sous-traitant qui est affiliée ou juridiquement liée à un participant. L’entité réalise des travaux dans les conditions prévues par la convention de subvention, fournit des biens ou des services pour l’action, mais n’a pas signé la convention de subvention. Le tiers respecte les règles applicables au participant qui lui est lié dans le cadre de la convention de subvention en ce qui concerne l’éligibilité des coûts et le contrôle des dépenses.
Participation terminée
431 53 Molndal
Voir sur la carte
582 78 LINKOPING
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.