Description du projet
Évaluation innovante de l’utilisation de l’énergie et des matériaux pour les machines de production
Augmenter l’efficacité énergétique et de l’utilisation des matériaux est essentielle pour la fabrication et la protection de l’environnement. Aucun outil de simulation n’évalue actuellement tous les facteurs pertinents au cours du cycle de vie des machines de production, y compris la conception et la fabrication ainsi que l’utilisation. La PME suisse Züst Engineering a développé le LCE-Tool pour permettre une prévision et une analyse efficaces des flux d’énergie et de matériaux lors de la fabrication et de l’utilisation des machines de production. Il a été démontré que le LCE-Tool réduit de moitié le temps et le coût du prototypage tout en réduisant considérablement la demande d’énergie et la consommation de matériaux pendant le processus de fabrication. Le projet LCE-Tool, financé par l’UE, aide l’entreprise à affiner la technologie et à la préparer pour la commercialisation.
Objectif
With LCE-Tool, we aim to disrupt the production machinery industry, by commercializing a tool to improve resource efficiency in manufacturing, via time efficient prediction and analysis of energy and material flows in the manufacturing and use phase. The manufacturing industry contributes to 20% of EU’s resource and energy demand, with high influence on the resource and energy efficiency properties of the produced products. Quantifying the energy/heat waste and identifying where the losses take place is key to increase energy and materials efficiency. Although there are numerous simulation tools towards this direction, the root casualties of each system’s energy demand cannot be yet identified, as the existing solutions provide limited information about the interconnection between manufacturing process of the machine, the final product and product performance during the use phase (trade-off limited quantification, inability to identify the stage of every loss).
LCE-Tool is the first life-cycle engineering software, allowing the sustainable design and operation of production machines, through a holistic evaluation of machine’s performance during both the design stage (machine producer) and the procurement process of new machines (machine user). Thus, we are able to decrease the power demand and the material consumption by 25% during the manufacturing process and enable the creation of virtual prototypes of high accuracy, providing up to 50% enhanced time and cost efficiency, as there is not more need for multiple expensive physical prototypes.
At ZÜST, we have high expertise in systems engineering, eco-design and project management. With LCE-Tool we aim to become a pioneering software company offering novel simulation solutions. Through this project we aim to create at least 20 new job positions. With a Phase 2 investment of €1.22M this would imply a Return of Investment of 4.8
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- ingénierie et technologiegénie mécaniqueingénierie de fabrication
- sciences naturellessciences de la Terre et sciences connexes de l'environnementsciences de l'environnementscience de la durabilité
- sciences naturellesinformatique et science de l'informationlogiciellogiciel d’applicationlogiciel de simulation
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Appel à propositions
(s’ouvre dans une nouvelle fenêtre) H2020-EIC-SMEInst-2018-2020
Voir d’autres projets de cet appelSous appel
H2020-SMEInst-2018-2020-1
Régime de financement
SME-1 - SME instrument phase 1Coordinateur
8607 SEEGRABEN
Suisse
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.