Descripción del proyecto
Impresión 3D de motores de par de altas prestaciones
La fabricación por adición se está convirtiendo rápidamente en una herramienta importante de fabricación de piezas de aeronaves críticas y no críticas para la seguridad del vuelo. El proyecto ADDIMOT, financiado con fondos europeos, tiene por objeto investigar las técnicas de fabricación por adición para diseñar y fabricar una nueva generación de pares motores eléctricos a fin de usarlos en inceptores activos inteligentes. Estos sistemas críticos para la seguridad del vuelo son los controles que los pilotos emplean para dirigir y maniobrar la aeronave. Se espera que esta nueva generación de motores muestre un mejor rendimiento que las técnicas de fabricación tradicionales con respecto al peso, el consumo de energía, la densidad de par, el coste y la compacidad.
Objetivo
The main objective of ADDIMOT project is to investigate additive manufacturing (AM) technologies to design, and manufacture a new generation of electrical torque motors for their application in Smart Active Inceptors (SAIs). This new generation of motors shall demonstrate better performance than the traditional solution in terms of weight, power consumption, torque density, cost and compactness of the design.
For this purpose, this main objective splits into the following technical objectives:
• Investigation on the most suitable materials for additive manufacturing of electric motors, attending to soft and hard magnetic, electrical, mechanical and thermal properties.
• Electromagnetic and mechanical design of the active parts of electric motors for smart active inceptors, mixing different materials and looking into new 3D geometries enabled by AM technology.
• Comparison of new concepts of active components enabled by AM with traditionally manufactured parts. Evaluation of electric motor concepts using fully AMed parts, fully traditional manufacturing and hybrid (AM + traditional) manufacturing.
• Electromagnetic and mechanical topology optimization of the evaluated electric motor concepts, in terms of weight, power consumption, torque density, cost and compactness of the design.
• Development of manufacturing criteria for the AM of electric motor components.
• Design and manufacture of three electric motor demonstrators using AM technology
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural.
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural.
- ciencias naturalesmatemáticasmatemáticas purastopología
- ciencias naturalesmatemáticasmatemáticas purasgeometría
- ingeniería y tecnologíaingeniería mecánicaingeniería de fabricaciónfabricación aditiva
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Régimen de financiación
CS2-IA - Innovation actionCoordinador
20018 San Sebastian
España