Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

Synthesis of methylene blue and some new thioether derivatives with an enhanced electrochemical microflow cell

Description du projet

Une chimie verte pour la synthèse des médicaments

La synthèse chimique souffre de limitations importantes, notamment en termes de toxicité, de sécurité et de coût élevé. En revanche, l’électrosynthèse organique se fait en une seule étape dans des conditions douces, sans avoir besoin de réactifs chimiques, et de manière écologique. Dans ce contexte, le projet BlueFlowCell, financé par l’UE, s’est fixé pour objectif de fabriquer un microréacteur à flux électrochimique permettant d’effectuer l’électrosynthèse d’un large éventail de réactions sans le soutien d’une solution électrolytique. Les scientifiques prévoient d’utiliser cette approche pour synthétiser du bleu de méthylène, le premier médicament entièrement synthétique utilisé en médecine, et des dérivés de thioéther largement utilisés en chimie médicinale ou comme agents antioxydants et antibactériens.

Objectif

Methylene blue is the first fully synthetic drug used in medicine, the most effective and safe medicines needed in a health system. In addition, thioethers derivatives are important materials that are used in organic, bioorganic and medicinal chemistry and are also known to exhibit different biological activities such as antioxidant and antibacterial. These compounds are synthesized commercially by chemical methods that suffer from significant limitations, such as expensive and toxic reagents, solvents, tedious work-up, safety problems. Organic electrosynthesis is recognized as a typical environmentally friendly process with features that many of which cannot be achieved by other methods. Most electroorganic processes are performed under reagentless and mild conditions in one step using efficient and ecofriendly methods and are in agreement with all the principles of green chemistry. Within this field, the use of microreactors in continuous flow is also concurrent with electrochemistry because of its convenient advantages over batch, such as no supporting electrolyte at all, due to the small distance between electrodes; high electrode surface-to-reactor volume ratio, short residence time and etc. This project aims to fabricate an electrochemical flow microreactor by the novel method of photolithography to decrease the interelectrode gap below 100µm. Thus, the resulting device should be suited to the electrosynthesis of a wide range of reactions without a supporting electrolyte solution. Through the present project, we also aim electrochemical synthesis of methylene blue and some new thioethers derivatives for the first time with a facile one-pot and supporting electrolyte-free method. Overall, this method has shown to be a promising tool for electrosynthesis and improving the outcome of standard batch cells. As well as, during the whole of the project the ER will gain maximum knowledge in microfluidic integrated devices and benefit from entrepreneurship skills.

Champ scientifique (EuroSciVoc)

Mots‑clés

Programme(s)

Thème(s)

Régime de financement

MSCA-IF - Marie Skłodowska-Curie Individual Fellowships (IF)

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) H2020-MSCA-IF-2019

Voir tous les projets financés au titre de cet appel

Coordinateur

BLACK HOLE LAB
Contribution nette de l'UE
€ 184 707,84
Adresse
111 AVENUE VICTOR HUGO
75784 Paris
France
PME
Oui
Région
Ile-de-France Ile-de-France Paris
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Liens
Coût total
€ 184 707,84