Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

Reversed-polarity III-nitride Sensors for Enhanced UV-detection

Descripción del proyecto

Nuevos materiales de aleación para mejorar la detección ultravioleta

La radiación ultravioleta es una tecnología facilitadora esencial que ha revolucionado el procesamiento industrial, así como los sectores del espacio, la defensa y la medicina. Las aleaciones de nitruro de galio y aluminio (AlGaN) son materiales perfectos para la detección ultravioleta ya que, al variar su composición, se puede controlar con precisión su borde de absorción en todo el rango del espectro ultravioleta, hasta longitudes de onda tan cortas como 200 nm. Sin embargo, a pesar de su potencial, la capacidad para separar los portadores fotogenerados en el material está limitada por el bajo nivel del dopaje de tipo P y la presencia de campos de polarización. El objetivo del proyecto ReSensE, financiado por las Acciones Marie Skłodowska-Curie, es utilizar materiales polares de AlGaN de tipo N para abordar estos problemas. Se ha demostrado que la orientación del material favorece la incorporación de impurezas de tipo P e induce mayores campos eléctricos para la separación de los portadores.

Objetivo

Smart, enhanced detection of ultraviolet (UV) radiation will be a key enabling technology for many forthcoming technological revolutions in fields such as industrial processing, space research, defence and medicine. AlGaN alloys with high Al content are the perfect materials for this type of device. By varying their composition, the absorption edge can be precisely controlled across the whole UV range down to wavelengths as short as 200 nm. AlGaN-based photodetectors are fast, with very low dark currents, highly biocompatible, and chemically stable. However, two main problems limit their development: the difficulty in achieving satisfactory p-type doping, and the presence of polarization fields that disrupt the internal electric field and make it difficult the separation of the photo-generated carriers. This project aims to use N-polar AlGaN materials to tackle both problems. This material orientation has proved to favour incorporation of p-type impurities and induce higher electric fields for carrier separation.
Different Metal Organic Vapour Phase Epitaxy (MOVPE) growth conditions will be studied to control the growth of N-polar AlN templates and magnesium doped AlGaN epilayers. Finally, a prototype of solar-blind UV photodetector based on AlGaN/AlGaN heterostructure will be grown, fabricated and fully characterized.
In order to pursue this project, the fellow will carry out the outgoing phase at Nagoya University, Japan, under the join supervision of Prof. Hiroshi Amano and Prof. Markus Pristovsek for a period of 21 months. He will then return to the Tyndall National Institute in Cork, Ireland, for the final 12 months under the supervision of Prof. Peter Parbrook. At the start of this project the candidate will also carry out an initial 3-month secondment period in a company that specialises in sensors to perform a preliminary simulation study and gain better understanding of the industrial requirements for a possible future commercialization of these devices.

Ámbito científico (EuroSciVoc)

Palabras clave

Programa(s)

Tema(s)

Régimen de financiación

MSCA-IF - Marie Skłodowska-Curie Individual Fellowships (IF)

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) H2020-MSCA-IF-2019

Ver todos los proyectos financiados en el marco de esta convocatoria

Coordinador

UNIVERSITY COLLEGE CORK - NATIONAL UNIVERSITY OF IRELAND, CORK
Aportación neta de la UEn
€ 283 056,96
Coste total
€ 283 056,96

Socios (1)