Cross-scale concurrent material-structure design using functionally-graded 3D-printed matematerials.

Información del proyecto

XS-Meta

Identificador del acuerdo de subvención: 956401

DOI

10.3030/956401

Proyecto cerrado

Fecha de la firma de la CE 5 Mayo 2021

Fecha de inicio 1 Septiembre 2021

Fecha de finalización 31 Agosto 2025

Financiado con arreglo a

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Coste total

€ 3 720 679,56

Aportación de la UE

€ 3 720 679,56

Coordinado por

UNIVERSIDAD POLITECNICA DE MADRID
Spain

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Websites, patent fillings, videos etc. (1)

Web portal

Web portal Initial setup will be continuously updated

Publicaciones

Peer reviewed articles (27)

A two-scale computational homogenization approach for elastoplastic truss-based lattice structures

Autores: Hooman Danesh, Lisamarie Heußen, Francisco J. Montáns, Stefanie Reese, Tim Brepols
Publicado en: Results in Engineering, Edición 25, 2025, Página(s) 103976, ISSN 2590-1230
Editor: Elsevier BV
DOI: 10.1016/j.rineng.2025.103976

Describing and Modeling Rough Composites Surfaces by Using Topological Data Analysis and Fractional Brownian Motion

Autores: Antoine Runacher, Mohammad-Javad Kazemzadeh-Parsi, Daniele Di Lorenzo, Victor Champaney, Nicolas Hascoet, Amine Ammar, Francisco Chinesta
Publicado en: Polymers, Edición 15, 2025, Página(s) 1449, ISSN 2073-4360
Editor: MDPI AG
DOI: 10.3390/polym15061449

Physics informed and data-based augmented learning in structural health diagnosis

Autores: D. Di Lorenzo a, V. Champaney b, J.Y. Marzin c, C. Farhat d, F. Chinesta a b c
Publicado en: Computer Methods in Applied Mechanics and Engineering, Edición 414, 2023, Página(s) 116186, ISSN 0045-7825
Editor: Elsevier BV
DOI: 10.1016/j.cma.2023.116186

Review of the Brain’s Behaviour after Injury and Disease for Its Application in an Agent-Based Model (ABM)

Autores: Luis Irastorza-Valera, Edgar Soria-Gómez, José María Benitez, Francisco J. Montáns, Luis Saucedo-Mora
Publicado en: Biomimetics, Edición 9, 2025, Página(s) 362, ISSN 2313-7673
Editor: MDPI AG
DOI: 10.3390/biomimetics9060362

A holistic study of the effect of geometrical and processing conditions on the static mechanical performance of LPBF strut elements

Autores: Massimiliano Casata, Sergio Perosanz, Conrado Garrido, Daniel Barba
Publicado en: Materials & Design, Edición 247, 2024, Página(s) 113387, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2024.113387

Physics-informed and graph neural networks for enhanced inverse analysis

Autores: Daniele Di Lorenzo, Victor Champaney, Chady Ghnatios, Elias Cueto, Francisco Chinesta
Publicado en: Engineering Computations, 2024, ISSN 0264-4401
Editor: Emerald Group Publishing Ltd.
DOI: 10.1108/ec-12-2023-0958

Designing necks and wrinkles in inflated auxetic membranes

Autores: Sairam Pamulaparthi Venkata, Valentina Balbi, Michel Destrade, Giuseppe Zurlo
Publicado en: International Journal of Mechanical Sciences, Edición 268, 2024, Página(s) 109031, ISSN 0020-7403
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ijmecsci.2024.109031

Effect of the building direction on the high-temperature mechanical properties of an IN738LC superalloy processed by laser-powder bed fusion

Autores: Jialiang Chen, Jinghao Xu, Johan Moverare, Luis A. Barrales-Mora
Publicado en: Materials Science and Engineering: A, Edición 909, 2024, Página(s) 146756, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2024.146756

NURBS-based shape parametrization enabling PGD-based space separability: Methodology and application

Autores: Mohammad-Javad Kazemzadeh-Parsi, Angelo Pasquale, Daniele Di Lorenzo, Victor Champaney, Amine Ammar, Francisco Chinesta
Publicado en: Finite Elements in Analysis and Design, Edición 227, 2023, Página(s) 104022, ISSN 0168-874X
Editor: Elsevier BV
DOI: 10.1016/j.finel.2023.104022

Data Completion, Model Correction and Enrichment Based on Sparse Identification and Data Assimilation

Autores: Daniele Di Lorenzo, Victor Champaney, Claudia Germoso, Elias Cueto and Francisco Chinesta
Publicado en: Applied Science, Edición 20763417, 2022, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app12157458

An alloy-agnostic machine learning framework for process mapping in laser powder bed fusion

Autores: Toby Wilkinson, Massimiliano Casata, Daniel Barba
Publicado en: Rapid Prototyping Journal, Edición 30, 2025, Página(s) 303-324, ISSN 1355-2546
Editor: Emerald Group Publishing Ltd.
DOI: 10.1108/rpj-02-2024-0068

Challenges in two-scale computational homogenization of mechanical metamaterials

Autores: Hooman Danesh, Tim Brepols, Stefanie Reese
Publicado en: PAMM- Procedings in Applied Mathematics and Mechanics, Edición volume 23, issue 1, 2023, Página(s) e202200139, ISSN 1617-7061
Editor: Wiley
DOI: 10.1002/pamm.202200139

FFT-based surrogate modeling of auxetic metamaterials with real-time prediction of effective elastic properties and swift inverse design

Autores: Hooman Danesh, Daniele Di Lorenzo, Francisco Chinesta, Stefanie Reese, Tim Brepols
Publicado en: Materials & Design, Edición 248, 2024, Página(s) 113491, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2024.113491

SPiFOL: A Spectral-based physics-informed finite operator learning for prediction of mechanical behavior of microstructures

Autores: Ali Harandi, Hooman Danesh, Kevin Linka, Stefanie Reese, Shahed Rezaei
Publicado en: Journal of the Mechanics and Physics of Solids, Edición 203, 2025, Página(s) 106219, ISSN 0022-5096
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.jmps.2025.106219

Optimization of precharge placement in sheet molding compound process

Autores: Fariba Ebrahimian, Sebastian Rodriguez, Daniele Di Lorenzo, Francisco Chinesta
Publicado en: International Journal of Material Forming, Edición 17, 2024, ISSN 1960-6206
Editor: Springer-Verlag France
DOI: 10.1007/s12289-024-01836-w

On the data-driven description of lattice materials mechanics

Autores: Ismael Ben-Yelun, Luis Irastorza-Valera, Luis Saucedo-Mora, Francisco Javier Montáns, Francisco Chinesta
Publicado en: Results in Engineering, Edición 22, 2025, Página(s) 102235, ISSN 2590-1230
Editor: Elsevier BV
DOI: 10.1016/j.rineng.2024.102235

Low-voltage dielectric elastomer actuators by electro-mechanical resonance syntonization

Autores: Sasan Rahmanian, Amin Alibakhshi, Hamza Mouharrar, José María Benitez, Francisco Javier Montáns
Publicado en: International Journal of Mechanical Sciences, Edición In press, available online, 2023, ISSN 0020-7403
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ijmecsci.2023.108758

The Semi-Penalized Updated Properties Model and Its Algorithm to Impose the Volume Fraction

Autores: Amin Alibakhshi, Luis Saucedo-Mora
Publicado en: Materials, Edición 18, 2025, Página(s) 2972, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma18132972

An Agent-Based Model to Reproduce the Boolean Logic Behaviour of Neuronal Self-Organised Communities through Pulse Delay Modulation and Generation of Logic Gates

Autores: Luis Irastorza-Valera, José María Benítez, Francisco J. Montáns, Luis Saucedo-Mora
Publicado en: Biomimetics, Edición 9, 2025, Página(s) 101, ISSN 2313-7673
Editor: MDPI AG
DOI: 10.3390/biomimetics9020101

Optimal velocity planning based on the solution of the Euler-Lagrange equations with a neural network based velocity regression

Autores: Ghnatios, Chady; di Lorenzo, Daniele; Champaney, Víctor; Cueto, Elías; Chinesta, Francisco
Publicado en: Journal of Dynamical and Control Systems, Edición 1, 2023, ISSN 1573-8698
Editor: Journal of Dynamical and Control Systems
DOI: 10.3934/dcdss.2023080

Elastomeric Cavity Opto‐Mechanics: Low‐Power Soliton Frequency Combs

Autores: Sasan Rahmanian, Hamza Mouharrar, Amin Alibakhshi, Zeeshan Iqbal, Luis Saucedo‐Mora, Francisco Javier Montáns, Jan Awrejcewicz
Publicado en: Advanced Optical Materials, Edición 13, 2025, ISSN 2195-1071
Editor: Wiley
DOI: 10.1002/adom.202402031

A spatial statistics framework for detection of build defects in laser powder bed fusion using on-axis photodiode sensors

Autores: Toby Wilkinson, Paul Rendell, Daniel Barba, Callum Churchman
Publicado en: Progress in Additive Manufacturing, Edición 10, 2025, Página(s) 8065-8085, ISSN 2363-9512
Editor: Springer Science and Business Media LLC
DOI: 10.1007/s40964-025-01095-4

Optimal trajectory planning combining model-based and data-driven hybrid approaches

Autores: Chady Ghnatios, Daniele Di Lorenzo, Victor Champaney, Amine Ammar, Elias Cueto, Francisco Chinesta
Publicado en: Advanced Modeling and Simulation in Engineering Sciences, Edición 11, 2024, ISSN 2213-7467
Editor: Springer Science and Business Media LLC
DOI: 10.1186/s40323-024-00266-2

Programmable wrinkling for functionally-graded auxetic circular membranes

Autores: Sairam Pamulaparthi Venkata a, Valentina Balbi a, Michel Destrade a b, Dino Accoto c, Giuseppe Zurlo
Publicado en: Extreme Mechanics Letters, Edición Vol 63, Sep 2023, 2023, Página(s) 102045, ISSN 2352-4316
Editor: Elsevier Limited
DOI: 10.1016/j.eml.2023.102045

Modeling systems from partial observations

Autores: Victor Champaney, Víctor J. Amores, Sevan Garois, Luis Irastorza-Valera, Chady Ghnatios, Francisco J. Montáns, Elías Cueto, Francisco Chinesta
Publicado en: Frontiers in Materials, Edición 9, 2022, ISSN 2296-8016
Editor: Frontiers Media SA
DOI: 10.3389/fmats.2022.970970

Effective properties of centro-symmetric micropolar composites with non-uniform imperfect contact conditions

Autores: V. Yanes a, Y. Espinosa-Almeyda b, R. Rodríguez-Ramos c d, C.F. Sánchez-Valdés b, F.J. Sabina e, F.J. Montans a f
Publicado en: European Journal of Mechanics - A/Solids, Edición Vol 101, 2023, ISSN 1873-7285
Editor: Elsvier
DOI: 10.1016/j.euromechsol.2023.105038

Damage identification technique by model enrichment for structural elastodynamic problems

Autores: D. Di Lorenzo, S. Rodriguez, V. Champaney, C. Germoso, M. Beringhier, F. Chinesta
Publicado en: Results in Engineering, Edición 23, 2025, Página(s) 102389, ISSN 2590-1230
Editor: Elsevier BV
DOI: 10.1016/j.rineng.2024.102389

Conference proceedings (5)

The Influence of Unit Cell Design on the Mechanical Properties of Ti6Al4V Lattice Structures Fabricated via Laser Powder Bed Fusion

Autores: M. Casata, D. Patil, D. Barba
Publicado en: Civil-Comp Conferences, Proceedings of the Fifteenth International Conference on Computational Structures Technology, Edición 9, 2024, Página(s) 1-11
Editor: Civil-Comp Press
DOI: 10.4203/ccc.9.2.3

Topology Optimization of Strain Energy Constrained 2D Elasto-Plastic Truss

Autores: H. Shi, F.J. Montans Leal
Publicado en: Civil-Comp Conferences, Proceedings of the Fifteenth International Conference on Computational Structures Technology, Edición 9, 2024, Página(s) 1-10
Editor: Civil-Comp Press
DOI: 10.4203/ccc.9.4.3

Computational Procedure for Finite Element Analysis of Functionally Graded Metamaterials

Autores: V.H. Yanes Francisco, F.J. Montans Leal
Publicado en: Civil-Comp Conferences, Proceedings of the Fifteenth International Conference on Computational Structures Technology, Edición 9, 2024, Página(s) 1-13
Editor: Civil-Comp Press
DOI: 10.4203/ccc.9.2.1

Damage-Based Criteria for the Combination of Offset Probabilistic Temporal Loads in Topological Optimization Designs

Autores: L. Irastorza-Valera, L. Saucedo-Mora, F. Chinesta, F.J. Montans Leal
Publicado en: Civil-Comp Conferences, Proceedings of the Fifteenth International Conference on Computational Structures Technology, Edición 9, 2024, Página(s) 1-14
Editor: Civil-Comp Press
DOI: 10.4203/ccc.9.2.2

Correlating Porosity and Photodiode Response in LPBF Manufactured Samples using Spatial Statistics

Autores: T. Wilkinson, C. Churchman, D. Beer, B. Koe, D. Barba
Publicado en: Civil-Comp Conferences, Proceedings of the Fifteenth International Conference on Computational Structures Technology, Edición 9, 2024, Página(s) 1-14
Editor: Civil-Comp Press
DOI: 10.4203/ccc.9.2.4

Book chapters (1)

Automatic Process Mapping for Ti64 Single Tracks in Laser Powder Bed Fusion

Autores: Toby Wilkinson, Massimiliano Casata, Daniel Barba
Publicado en: The Minerals, Metals & Materials Series, Materials Processing Fundamentals 2023, 2023, Página(s) 199-209
Editor: Springer Nature Switzerland
DOI: 10.1007/978-3-031-22657-1_17