Objectif
Plasma deposits on flat substrates have been characterised using nanoindentation and chemical surface analysis. The chemistry was found to change from organic to inorganic with the addition of oxygen to the plasma. A corresponding increase in the modulus of 3-3.5 GPa was found from nanoindentation tests. Equivalent coatings were deposited on to untreated, unsized carbon fibres. These fibres were than impregnated with resin to form single filament fragmentation test (SFFT) specimens, and in bundles to form composite rods. An adhesion promoting oxygen pre-treatment was applied and optimised using the SFFT in combination with SEM fractography. The influence of a high modulus coating upon micro and macro-mechanical properties was measured using SFFT, tensile and torsional testing of the composite rods. Using models of these 3-phase systems, the properties of the coating within the composite were found to agree with estimates predicted from the coating chemistry, via its correlation with the values determined separately by nanoindentation. Estimates of the fracture toughness (GC) of the interface between fibre and matrix in a 2 phase composite have been made. The models are being applied to the estimation of the fracture toughness of an HMDSO/02 plasma interphase.
The proposed research is directed towards the development of a fibre coating technology and related microchemical and micro and macromechanical understanding for the improvement of the reliability and damage assistant of composite materials. These objectives can be achieved by molecular engineering of the coating for the optimisation of the interphase between fibre and matrix to provide improved off-axis properties.
These polymer films with controlled modulus and thickness will be deposited onto the carbon fibre surface by microwave plasma polymerisation, which enables extremes of coating properties, from elastomeric to glassy to be examined. The microchemistry and surface chemistry can be varied through the plasma parameters. The major research tasks are :
1. Correlation of the mechanical properties of supported and unsupported films with chemistry for calibration purposes.
2. Synthesis of coatings on fibres with different properties.
3. Conditions for synthesis of controlled coatings of defined modulus, thickness and with good adhesion to fibres and matrix.
4. Characterisation of model composites and laminates.
5. Modelling of micro and macromechanical tests to establish effect of coating properties and dimensions on composite properties.
6. Verification of improvements in damage resistance.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie ingénierie des materiaux composites
- sciences naturelles sciences chimiques science des polymères
- ingénierie et technologie ingénierie des materiaux revêtement et films
- ingénierie et technologie autres génies et technologies microtechnologie ingénierie moléculaire
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
S1 3JD Sheffield
Royaume-Uni
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.