Objetivo
At the end of the project new, proprietary, pervaporation membranes are available for the selective removal of aromatics from saturates hydrocarbons mixtures. These membranes have been industrially manufactured at GSE (East Germany), since the GFT facilities can't handle the required amount of solvent. This membrane has been characterised in the different partners testing facilities, and no significant discrepancy could be reported on the performances of the membranes.
Due to delay in membrane development it was not possible to test the membranes on the pilot at IFP CEDI SOLAIZE, but some pilot test results were obtained on long term test on a GFT pilot plant, showing a good stability of membrane performances.
Even if the actual membrane separation characteristics are lower that was initially foreseen, some economic hybrid processes schemes have been developed for the reduction of benzene content in gasolines. This new proprietary process schemes afford variable operating costs reductions down to 50 % compared to conventional alternatives. However these results strongly depend on other refinery plant capacity and on the site integration opportunities.
Finally a pilot pervaporation unit has been built jointly by GFT and IFP at Solaize and has been operated successfully on ETOH/ETBE mixtures, providing useful information on the long term behaviour of the membrane developed during Brite project BRE-CT91-0408 and its sensibilities to particular operating parameters such as conditioning procedure, presence of impurities, permeate pressure, temperature, feed flow. No technical difficulties while running need to be reported.
Three modules based on the 1056-1399 GFT industrial membrane with optimised support have clearly demonstrated that EtOH/ETBE separation can be done using this system. Good flux and selectivity were obtained with industrial (i.e. impure) mixtures. Further more this module exhibited a good stability during the ageing tests. As a consequence, the membrane lot No 1056-1399 has been selected for industrial applications.
The separation of aromatics from hydrocarbon mixtures requires, due to the existence of numerous azeotropes, complicated and expensive solvent extraction or distillation processes. The need for improved separation processes of such mixtures (especially for benzene extraction) is increasing in the oil and chemical industries, mainly because of environmental constraints (expected reduction of benzene content in gasoline). The recently developed pervaporation technology might offer attractive solutions for these separations (lower investment costs along with highly reduced energy consumptions and better ease of operation), if needed in combination with conventional techniques. But, unfortunately, present commercially available pervaporation membranes and systems, developed for the dehydration of organic mixtures, cannot perform such separations, although there are at the laboratory scale some promising results with polymers which are selectively permeable to aromatics.
The aim of this project is therefore to develop :
- new pervaporation membranes which are both highly selective and highly permeable to aromatics in hydrocarbons mixtures and also stable in industrial operating conditions,
- efficient pervaporation systems, including low cost spiral-wound modules specially designed for these separations,
- innovative benzene separation schemes combining the membrane units developed in this project with conventional techniques (distillation, extractive distillation, ...).
Among the numerous potential application cases encountered in the oil and chemical industries, 2 cases were identified as the most promising for pervaporation application and will be studied in detail during the project : benzene extraction from light reformate cuts and benzene removal in ethylene production plants. At the end of the project the developed membranes and systems will have been operated on a pilot unit (5 m2 of membrane area) with actual industrial feeds and the technology will then be ready for a final development step on an industrial demonstration unit.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería ambiental energía y combustibles combustibles líquidos
- ciencias naturales ciencias químicas química orgánica hidrocarburo
- ciencias naturales ciencias químicas ciencia de polímeros
- ingeniería y tecnología ingeniería química tecnologías de separación destilación
- ciencias naturales ciencias químicas química orgánica compuestos alifáticos
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
92500 RUEIL-MALMAISON
Francia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.