Objectif
The laboratory prototype of an AE system for tool wear monitoring at machining processes (turning, drilling, grinding, etc) has been developed and built up. The system has been tested with artificial AE signals and in the frame of grinding experiments. Both the hardware and the software necessary to handle the system have proven their functionability. It is intended to apply the system not only for monitoring of machining processes but also for other areas where continuous AE is generated, e.g. for condition monitoring of bearings. For that purposes some further developments and improvements of the AE equipment have to been done. This should be performed in the frame of the construction of an industrial prototype. This goal appears to be feasible since no principal obstacles have been found.
The model of AE generation by friction has been verified by tribometer and grinding experiments. The original approaches have been modified and expanded in order to qualitatively fit the experimental results. The basic assumptions of the model were found to be justified. Additional improvements of the model in future are useful and feasible.
The proposed project deals with the basic understanding which is necessary for the development of a method for automatic monitoring of machining processes in industry.
During machining of metallic materials with geometrically defined cutting edge (turning, drilling, milling) acoustic emission (AE) is generated. As shown in a previous BRITE-project, tool wear is detectable with AE with high sensitivity. Nevertheless up to now it is not clear which mechanism gives the main contribution to AE during machining. In earlier publications plastic deformation and crack growth are assumed to be the main sources. More recent papers and also the above mentioned BRITE-project lead to the result that the friction between tool and workpiece is probably the essential source of AE. The general aim of this proposal is the clarification of this controversy, because it concerns the fundamentals of AE-techniques for tool wear monitoring in industrial manufacturing. As long as it is not clear, which is the dominating AE-source during machining, no focused development and optimisation of AE-technique for industrial application is possible.
The objectives concern the quantitative description of the different AE-sources and the experimental verification of the corresponding theoretical model. The major research tasks are: i) physical description of the generation of AE based on friction, ii) building-up an equipment which is suited for recording and analysing the AE from cutting process, iii) experimental investigations to determine the AE-sources which are relevant at cutting, iv) comparison of the experimental results with theoretical predictions. The proposal concerns focused fundamental research since the results will generate new fundamental knowledge on tool wear monitoring and will be the basis for a new automatic control system for the machining industry.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles informatique et science de l'information logiciel
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique système d’automatisation et de contrôle
- ingénierie et technologie génie mécanique ingénierie de fabrication fabrication soustractive
- ingénierie et technologie génie mécanique tribologie
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
66123 Saarbrücken
Allemagne
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.