Objectif
The Project has shown that the concept of using the CAD Model of a component to create synthetic radiographs at a limited number of poses and, matching these images to the actual images of the component under test, is a very powerful technique for the detection of defects. This concept having been proven to b feasible will now require further optimisation to allow such a system to be used on a production basis. Advances in technology during the life of the Project will allow a pre-production model of the RADICAD System to meet the needs of end users in many industries.
The anticipated benefits of this technological advancement will be to allow high levels of non destructive testing on components to be applied in an automated or semi-automated manner. The requirement to acquire defect data with only a limited number of component positions will enable the technology to operate in the production process. The ability to project defects back into the CAD Model will assist in rapid prototyping of new castings and components. The anticipated cost of the Radicad System will be substantially lower than computer tomography technology. The prototype system is currently installed at Iveco, Turin, and has been fully tested and is available for demonstration.
The X-ray inspection of 3D industrial parts such as gear box housing or super plastic aeronautic parts is limited by many constraints. First, most of the time the parts cannot be inspected along each direction due to their thickness and the resulting X-ray attenuation prevents the use of tomography. Even when the acquisition is possible, the acquisition time required to perform a complete three-dimensional acquisition, reconstruction and volume control is not compatible with the number of parts to be inspected. However, for many industrial parts, the manufacturer is not interested in the inspection of complete parts, but wants to check for flaws in critical areas. It is proposed here to develop a complete automatic system which will correlate the information from multiple digital radiographs of the part in order to localise and characterise the flaws in the part CAD model. A gain of 5% on the time to market a new product and a 70% reduction on laboratory cost compared with the current non destructive and destructive analysis are expected by the end users. This system is not focused on only one application, it addresses the problem of localised defects when a CAD model of the part is known. Thus is intended to inspect a variety of materials from cast iron, to composites. Subsequent exploitations is envisaged which will ensure appropriate technology transfer to other industrial sectors such as micro-mechanics or even the biomedical field.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
NR31 0LX Great Yarmouth
Royaume-Uni
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.