Skip to main content
European Commission logo
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary
Contenu archivé le 2024-04-19

LASER BASED PATTERNING OF GLASS

Objectif


The achievements of the project can be summarised as the following:
laser processing technologies to produce pseudo 3D patterns on the surface
laser processing technologies to obtain colour change effects in the glass
special additive for glass and coatings which improve the quality of dry etching by means of laser and are applicable for mass-production
special glass which is suitable for laser induced colour change
knowledge about change of glass attributes such as mechanical properties due to laser patterning
an industrial prototype which can perform dry etching and colour change and is tailored for the specific needs of glass patterning
special control environment for the prototype which is suitable for glass patterning and machine programming
study on technical and economical evaluation of the laser based pattering of glass
The technology for surface patterning of glass is based in manual mainly techniques such as sand blasting and diamond tools. Although this kind of technology is the only one existing, it does not produce good quality patterns due to the human factor and also the low resolution patterns produced. The use of these techniques in wider area patterning for pseudo-3D-patterns is very expensive and time consuming. On the other hand, patterning in colour of glass, both on the surface and in the bulk material, involves chemical and/or thermochemical procedures that are expensive and produce simple patterns. Over the last years, lasers have found many industrial applications particularly in machining and material processing. Most of these applications concern the treatment of metals and alloys. Lasers offer the advantage and photon energy may be provided in a temporally and spatially controlled manner and in a contact-free and clean process. In this proposal, laser-based patterning techniques will be evaluated and the potential use of the most promising will be fully exploited, both technically and financially. Two different approaches will be investigated. The first one is the "laser-based surface dry etching" of the glass surface that gives the possibility to produce pseudo-3D-patterns. The other one is the "laser triggered colour change" of the glass either on the surface on in the bulk material. During this project, a demonstration pilot machine cell will be developed and tested in order to evaluate the technology developed under working conditions. This prototype will form the basis for future development and production o f machines that use laser for decorative purposes on various materials (glass, marble, wood, metal etc.)

Appel à propositions

Data not available

Régime de financement

CSC - Cost-sharing contracts

Coordinateur

ST GOBAIN RECHERCHE
Contribution de l’UE
Aucune donnée
Adresse
39 QUAI LUCIEN LEFRANC
93303 AUBERVILLIERS
France

Voir sur la carte

Coût total
Aucune donnée

Participants (4)