European Commission logo
English English
CORDIS - EU research results
Content archived on 2024-04-16



To develop an alternative process to the vacuum injection process by using the known so called "wet-press-process".

The wet-press process has the disadvantage of the long hardening time. This, to improve by using hot-hardening for the product's top layer, is the main new research factor in this project. It would give the possibility to produce large parts or products more economically. By improving furthermore the quality of the top layer and the filling material of the product, shorter production time, but combined with the advantages of the wet-press and injection process should result in good market acceptance for the final product.


Data not available

Call for proposal

Data not available

Funding Scheme

Data not available


Polyester Polyurethan Technik GmbH
EU contribution
No data
Am Seemannsheim 6
26697 Emden

See on map

Total cost
No data

Participants (1)