Objectif
BE95-1228 Cost effective Series and Mass-production of High-precision Metallic Microparts and O???
Companies manufacturing high precision metallic parts have to meet increasing accuracies with decreasing tolerances in both mass-production and for cost-effective series. Parts have to be machined with small holes and narrow slots and/or shaped with accurate curvatures. The technologies used nowadays, like punching, conventional milling, grinding, etching, and electrical discharge machining (EDM) do not give the demanded accuracy in combination with either the speed or the flexibility.
Conventional laser micromachining for cutting and drilling is already applied in industry. Unfortunately, it can NOT be used for the manufacturing of microparts, due to product contamination during laser processing by condensed metal vapour and spatters. Hence an additional cleaning step before the final assembly is required, which complicates the product-handling dramatically. The first objective of the project is to develop an industrial laser microcutting and drilling process that delivers clean products with a processing width of going from the conventional 0.1mm down to 25/ m and with a typical mass-production processing speed (cutting >3m/min, drilling >20 holes per second).
Laser micromilling is not yet applied industrially. The only laser milling system in the market today is the MAHO system that uses a CO2-laser to texture and mill parts. The achieved accuracy and surface roughness of +10 m, which is below the demands for most applications in electronics and automotive industry (e.g. to make optical submicron structures in moulds). It is the second objective of this project to develop laser milling with accuracies and surface roughness down to submicron by using excimer and diode pumped Q-switch Nd:YAG lasers.
A special application of this milling technology, texturing of moulds for product housings, will be developed in parallel. It has advantages over conventional texturing (e.g. EDM) like flexibility, locally controllable, more delicate textures (soft-touch textures), and environmentally friendly.
In order to apply laser submicronmilling for finishing machining a product in industrial mass production, a new lasersystem, the Copper Vapour laser (CVL), is even better suited, in view of its short pulselength (15ns) combined with its high pulsefrequency (30kHz). This enables high speed AND high quality machining with practically no heat-affected-zone. The third objective of this project is to develop an industrial 3D laser milling process for metallic microparts (like spiral groove bearings, micro cutting tools and sensors) with processing speeds going from the present material removal rates of 0.05mm3/s up to 1mm3/s, while the surface roughness diminishes down to <0.51wm. It is therefore essential, as a fourth objective, to develop an industrial 100W CVL with a dedicated optical system (like fibers).
The demonstrator will consists of a prototype laser workstation able to process metallic parts proving the processes developed. A process control subsystem will be integrated.
The consortium comprises two industrial users of the laser submicronmachining technology, PHILIPS (for high-tech electronic products) and BOSCH (for high quality automotive products). They are responsible for process development together with the institute TNO, the inventors of laser micromachining, whose other task is the characterization and analysis of processed products. The laser manufacturer and system house OXFORD LASERS will responsible for the development of an industrial 100W CVL and demonstrator system, with the aim to market this system, while OXFORD UNIVERSITY develops laser beam-handling for the CVL.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie ingénierie des materiaux fibres
- ingénierie et technologie génie mécanique ingénierie de fabrication fabrication soustractive
- ingénierie et technologie génie mécanique génie automobile ingénierie automobile
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique capteurs
- sciences naturelles sciences physiques optique physique des lasers
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
5600 MD Eindhoven
Pays-Bas
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.