Objetivo
The aim of this project is to fulfil a need throughout
industry for automated Robotic inspection systems that
perform remote in service inspection on large and complex
vertical surfaces and ceilings with far more versatility
and task repeatability than has been achieved hitherto.
The proposal is to build a single inspection instrument
that comprises of a compact climbing vehicle which can
move freely over large vertical areas carrying a
scanning arm with up to eight degrees of freedom and then
explore structures of almost any geometrical complexity.
The greater degrees of freedom will enable it to perform
a variety of scanning routines with a dexterity
approaching that of a human arm. It will be able to move
freely on vertical or horizontal surfaces and will thus
be able to inspect large surface areas and volumes that
can currently only be covered by very large fixed base
robot arms. At the same time, it will be light enough to
be easily transportable from task to task on sites that
are in different geographical locations. For example the
tool might be used to inspect in sequence a ship hull, a
nodal joint on a nuclear pressure vessel, a pipeline, a
storage tank, etc. It will be equipped mitially with
ultrasound inspection probes and eventually with a range
of sensors such as eddy current coil, gas sensor, etc.
Thus the inspection instrument will have all the
versatility characteristic of a human operative but with
the added advantage of faster inspection speed, ability
to work in hazardous environments, greater accuracy and
task repeatability and without the measurement errors
caused by human tedium. The proposed inspection
instrument will automate inspection tasks in the ship
building, nuclear power plant and oil industry that have
previously been performed either entirely manually or
with automation limited to travel on fixed rails, for
example along welded seams.
There is a need for a versatile, accurate and
transportable inspection tool because currently most
automated systems are tailored to do just one task,
frequently in just one place, and with Cartesian type
scanning arms that have limited degrees of freedom. Thus
the range of scanning routines that can be implemented is
very limited. Also the inspection of surfaces with
Cartesian devices is limited to flat or gentle contours
as they cannot scan structures of more complex geometry.
Although multi axis scanning arms with six or more
degrees of freedom are able to inspect more complex
surfaces and inspection systems based on these arms do
already exist in industry they. are usually fixed site
systems, for example robots constrained to translation
motion on monorails alongside a factory production line
or a long welded seam. They have been limited to fixed
site work because of an intrinsic limitation in locating
the spatial position of an inspection sensor precisely on
remote surfaces due to uncertain knowledge of the
environment. This uncertainty plus the invalid assumption
of perfect knowledge of robot dynamic and kinematics
models during control system design leads to poor task
accuracy and repeatability. An inspection tool on the
other hand must have sufficient spatial precision of
sensor positioning to permit high resolution C Scan
imaging with many types of NDT transducers.
To overcome these limitations the project aims to :
- develop a multi axis scanning arm that is
dextrous and can implement a variety of
scanning techniques.
- add mobility at the base of the redundant axis
scanning arm via the climbing vehicle to give
greater volume coverage for inspection purposes than
fixed base and dedicated devices constrained
to move on rails.
- investigate new control methods that use the "Task
Function" approach to improve task
repeatability at remote locations.
- make the arm and climbing vehicle much lighter
than has been achieved hitherto for the same
specifications of precision, through the uæ of composite
material for the arm links.
The versatility of the inspection tool will be tested on
a number of distinct tasks. One task is the inspection of
3D seam wleds on the hull structure of large ships. here
the vehicle could walk the length of a ship's floor or
side and the arm could deploly the sensor in the corner
weld between wall and ceiling. Another task is the
inspection of weld defects on a mock up of a nuclear
pressure vessel provided by one of the partners.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información ingeniería electrónica sistemas de automatización y control
- ingeniería y tecnología ingeniería de materiales compuestos
- ingeniería y tecnología otras ingenierías y tecnologías ingeniería nuclear
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información ingeniería electrónica sensores
- ingeniería y tecnología ingeniería mecánica ingeniería de vehículos ingeniería naval embarcaciones marinas
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
SE1 0A LONDON
Reino Unido
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.