Objectif
High density magnetic recording evolves into digitized formats. An international standard has been defined, i.e. the Digital Video Cassette (DVC). The first DVC products have been introduced into the Japanese market in 1995. Market prospects predict 75% growth per year, resulting in 70 million DVC's sold in the year 2002. This offers large profit opportunities. At the moment, only two Japanese companies are in control of this technology.
The high performance tape needed in the DVC system is based on a Metal Evaporated magnetic thin film (ME tape). The state of the art advanced ME tape is a CoO multilayer structure on a PET substrate that is covered by a Diamond Like Carbon (DLC) wear resistant layer and a lubricant on top. The DLC coating is the cost determining factor because its deposition speed is two orders of magnitude lower than that of the magnetic coating, and it is difficult to deposit on a large area.
The objective of this project is to develop and characterize a prototype DVC that is suitable for the next generation video and (computer) data storage applications In this proposal, not electron beam evaporation is chosen for the deposition process, but DC magnetron sputtering. Advantages of this concept are: the possibility of thinner recording layers (better performance), less raw material consumption and high in line deposition speed of the wear resistant layer. The latter makes cost effectiveness of this concept possible. This research objectives are briefly summarized:
1. Obtain know how about handling and thermal load properties of new ultra thin DVC substrates (4.6 and 6.0 mm in thickness), suitable for a webcoating environment.
2. Develop a coating stack by DC magnetron sputtering. This results in three sub objectives:
The total coating stack must be thinner than 120 mn resulting in better recording performance.
An oblique magnetic anisotropy must be induced by the DC magnetron sputtering process.
The process must and can be three times as efficient in raw material consumption.
3. Develop a wear resistant layer using reactive DC magnetron sputtering (SiOx, AIOx). Its thickness will be around 10 nm and deposition (a.o. speed) should be compatible with the total process. 4. A suitable lubricant will be developed and deposited (typical thickness: one or a few monolayers) either in line with the inorganic coating stack (in vacuo) or off line.
The texture of the different layers in the coating stack determines the recording performance and is very much dependent on the sputter geometry. Therefore development is carried out on a semi industrial scale, i.e. web widths of 58 cm. Minimum tape length will be 70 meters (small size cassette).
The duration of the project is 3 years and must provide the consortium with all the information needed for a successful implementation of the process on a production scale, i.e. technology and investments. The partnership covers the complete range of skills necessary for developing a DVC, i.e. a company applying sputtered coatings on films (IST, main contractor), a company supplying and developing lubricants (AUSIMONT), a manufacturing company active on the video market (MPO), a company that is involved in the DVC hardware and that can monitor trends (PHILIPS) and a university with fundamental knowledge on, and an outstanding infrastructure for, research on magnetic recording (UT). The partnership is completely complementary in its tasks and every partner is a major player in its field of competence.
Also three sub contractors will be consulted for scientific and technical support on PET substrates (TDF), Diamond Like Carbon coatings (BEKAERT) and high resolution transmission electron microscopy (HRTEM, University of Antwerp RUCA, E MAT).
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie mécanique tribologie lubrification
- sciences naturelles sciences physiques optique microscopie electron microscopy
- ingénierie et technologie ingénierie des materiaux revêtement et films
- sciences naturelles mathématiques mathématiques pures géométrie
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
9870 Zulte
Belgique
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.