Objectif
- Suitable nodes that fulfil the requirements established for their application in the machinery design. The behaviour of these nodes has been tested statically and dynamically and their results have shown that they are suitable for being used in machinery field.
- Prototype modules of machining centres, big gantry machines, punching machines and wood working machines built with reticular structures.
- Guidelines for designing prototypes modules with screwed or welded reticular structures. The guidelines result from the experience gained in designing prototype modules during the project. These guidelines include the design of the interfaces, the orientation of the bars and the geometrical characteristics of bars and nodes.
- Bases of the architecture for a data processing assistant tool for designing of machine structural modules based on reticular structures. The complete software tool will be done afterwards out of project.
Objectives and content
In industry in general and in the Machine-Tool sector in
particular, it is palpable the growing need of new
technical solutions. As a response to the problems
derived from actual structural elements (beds, columns,
portics mobile parts ..): scarce modularity, high weight
of the mobile modules, not detachable neither reusable,
high cost in time and resources for new redesigns, few
possibilities to obtain customer oriented products, great
dependency of suppliers (mainly founders), scarcely
manageable and costly transportation, costly unions to
the pavement, a new technique for the construction of
these structures in Machine-tool has been outlined.
It consists on structural modules composed of a reticule
of truss elements linked through screwed spherical knots.
This project is going to base on the spatial structures
used in civil engineering, to the construction of machine
structural elements that have been, up to date, made of
castings, welded sheets or in sometimes of polymeric
concrete.
This kind of structural designs offer the possibility of
increasing automation of the design processes by means of
software tools which link CAD with simple Calculus
programs, giving the designer the best design in the
presence of the forces and solicitations of one module,
thus, making the particularisation tasks easier. The
process of automation of design and assembly must finally
give the distribution and characteristics of bars and
nodes and the points where the rest of elements (motors,
guides, protections, ball screws) are to be joint.
After having accomplished a series of behavioural
theoretical analysis of this type of architectures as
compared to the traditional ones, the following
objectives are established:
To get enough data that permits the development of a
methodology, rules, strategies and good practices for
design and construction of several types of machine-tools
with this method.
Developing three prototype modules and experimentally
corroborate their adequate behaviour in existing
machines.
Developing a methodology and data processing assistant
tool for technical design of machine structural modules
based on reticular structures.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie civil
- sciences sociales sociologie relations industrielles automatisation
- ingénierie et technologie génie mécanique ingénierie de fabrication fabrication soustractive
- ingénierie et technologie ingénierie des materiaux papier et bois
- sciences naturelles informatique et science de l'information science des données traitement des données
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
20870 ELGOIBAR
Espagne
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.