Objectif
During the project two main changes in technical program have been incorporated to improve the effective potential exploitation. These changes, included in the revised project at the mid term, consist into:
1) Prototype CCD cameras, suitable for the demanding project specifications to the sensor device, appeared in 99. Therefore they were adopted as basic sensor, replacing the original fast pyrometer. This new approach improves the sensor performance (particles speed and size are measured, besides temperature);
2) In running tests, it has been demonstrated that a on-line process control is meaningless, as no feedback algorithm can correlate in feedback the process variable with the process quality.
Therefore a product control approach has been followed: the diagnostic system will be exploitable as stand-alone device for system validation and calibration purpose as well as a on-off system to enable production.
Due to these changes the following deliverables have been fulfilled:
1) Data base on thermal spray processing;
2) Experimental data base on influence of process parameters on process quality;
3) Prototype of diagnostic system able to measure the particles temperature, velocity and size in thermal spray;
4) Prototype of on-line monitoring system for thermal spray process, adequate for ON-OFF product control;
5) SW for automatic data acquisition, treatment, analysis;
6) Technical requirements and recommendations for process control industrial implementation.
Objectives and comment
Thermal Spraying (TS) is a rapidly growing part of
materials engineering with applications in more than 35
modern industrial areas: mechanics (high- and lowfriction coefficient coatings in dry of lubricated
friction, wear resistant coatings); electrical field
(conducting or insulating coatings, magnetic coatings);
thermal field (thermal barriers, thermal conducting
coatings); chemistry (protective coatings, corrosion
resistant coatings); medicine (coatings for prosthesis
and implants). An actual world market of Thermal Spraying
is about 1 billion ECU, with the previewed annual 15%
increase to the end of decade.
To satisfy constantly restricting demands for process
versatility, efficiency and cost the Project is committed
to update TS with the intelligent system of on-line
control capable to provide an automatic closed-loop
process operation. Proposed R&D activity is to realise
the following development plan:
to transfer the modern powerful diagnostic method of
high-temperature media - laser reflectometry into actual
conditions of TS technologies;
to work out the universal technique for real-time
diagnostics of sprayed material (temperature and density)
and substrate (temperature) for the characteristic TS
processes (Flame Spray, Plasma Spray, Wire Arc Spray,
High Velocity Oxygen Fuelling, High Pressure Spray,
etc.);
to construct an industrial type equipment (remote
optical sensors, fibre delivery system, data acquisition
and treatment unit, feed-back controller) and required
software to provide real-time monitoring of spray and
substrate in course of TS;
to accomplish industrial validation of the control
system for different TS processes and various coating
materials (metals Ni, Mo, W, alloys Ni-Cr, Ni-Co,
composites Al-Si-Polyamide, Ni-Graphite, ceramics Al203,
TiO2, Chromium Carbide and biomaterials Calcium Carbide
and Hydroxyapatite).
The expected achievements concerning the intended endusers due to Project realisation:
reduced costly, time- and materials- consuming preperformance trials (for 20-50%);
increased products quality (15-20%, anti-corrosion and
refurbish coatings deposited by WAS, abradables and solid
lubricants deposited by HVOF, biomaterials deposited by
PS);
diminished product loss due to non-conformity (up to
20% for an advanced spraying enterprise);
reduced losses of powder materials, (in average for 15-
20%; the actual cost is up to 450 ECU/kg for regular
powder and up to 700 ECU/kg for certified powder);
decrease energy and water consumption (7-10%);
ameliorated production environment by diminishing
powder evaporation (15-20%), plasma torch heat exceed
(10-15%), noise due to gas overrun (from 120-130 dB down
to 90 dB), ozone generation (to obey 200-250 kg/m3);
better work conditions for the personnel due to reduced
hand-held operations and staff contacts with hazardous
production atmosphere.
The expected annual benefit of process control
implementation may be estimated as 300-400 kECU for an
average Spraying SME, which leads to a total European
benefit about 45-50 MECU.
In general, the developed and validated control equipment
concerns three large industrial markets: Thermal Coating
Products (250-300 MECU) - a considerable improvement of
products quality are expected and new coating
combinations become possible;
Thermal Spraying Equipment Production (100-lS0 MECU) -
the system of process control is to be integrated into
the updated coating workstations;
Diagnostic Equipment Fabrication (100-150 MECU) - the
achieved innovations shall be transferred into another
diagnostic systems applied for different high-temperature
or plasma technologies.
The Project Co-ordinator and end-users will undertake an
active dissemination policy. The scope of potential
industrial users and targeted groups for dissemination
will be provided in course of the Project via partners
regular consumers and collaborators, sale departments,
contact with correlated projects.
The commercial version of process control equipment will
be available on the market 2 years after the completion
of the Project.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie mécanique tribologie lubrification
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique système d’automatisation et de contrôle
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique capteurs capteurs optiques
- ingénierie et technologie ingénierie des materiaux revêtement et films
- ingénierie et technologie biotechnologie industrielle biomatériaux
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
64030 Montefino
Italie
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.