Training Industry in StresS Measurement

Project Information

Grant agreement ID: BRRT975043

Project closed

Start date 1 January 1998

End date 31 December 2001

Funded under

• Specific research and technological development programme in the field of industrial and materials technologies, 1994-1998

Total cost

No data

EU contribution

No data

Coordinated by

COUNCIL FOR THE CENTRAL LABORATORY OF THE RESEARCH COUNCILS
United Kingdom

CORDIS provides links to public deliverables and publications of HORIZON projects.

Links to deliverables and publications from FP7 projects, as well as links to some specific result types such as dataset and software, are dynamically retrieved from OpenAIRE .

Deliverables

Communicating the applicability, reproducibility and reliability of the neutron stress measurement method, and its relation to other stress measurement methods to the engineering community

Work undertaken as part of the training measurements has been extensively published by the members of the TRAINSS consortium. The list of current publications is given below. In addition, measurements were made in accordance to the forthcoming standards (VAMAS and CEN), so that their reliability can be quantified. - "Validation of Residual Stress Predictions for a 19mm Thick J-Preparation Stainless Steel Pipe Girth Weld Using Neutron Diffraction", Edwards, L., Bruno, G., Dutta, M., Bouchard, P.J., Abbott, K.L. and Lin Peng, R. (2000) Proc. 6th Int. Conf. on Residual Stresses, Institute of Materials London, pp. 1519-1526. - Measurement of the Residual Stresses near a short 20o repair in a 19mm thick stainless steel pipe girth weld. Edwards, L., Santisteban, J.R., Stelmukh, V., Bouchard , P.J. and Daymond, M.R. (2000) presented at MecaSENS 2000: an International Conference on Stress Evaluation by Neutron and Synchrotron Radiation, and accepted for publication in Journal of Neutron Research. - "Neutron Transmission Spectroscopy" Santisteban, J.R., Edwards.L., Steuwer, A. and Withers, P.J. (2001) Journal of Applied Crystallography, 34, pp. 289-297 - "Bragg Edge Determination for Accurate Lattice Parameter and Elastic Strain Measurement" Steuwer, A, Withers,P.J., Santisteban, J,. Edwards, L., Fitzpatrick, M.E., Johnson, M.W., Daymond, M.R. and Wang, D.Q. (2001) Physica Status Solidi (a) 185, No.2, pp. 221-230. - "Neutron Transmission Spectroscopy: A Solution to the d0 Problem?" Steuwer, A, Withers,P.J., Santisteban, J.R. ,. Edwards, L., Fitzpatrick, M.E., Johnson, M.W., Daymond, M.R. and Bruno, G (2000) Proc. 6th Int. Conf. on Residual Stresses, Institute of Materials London, pp1239-. - "Finite Element and Experimental Study of Residual Stresses in a Multi-pass Repair Weld" Dong P., Zhang J., Hong J. K., Bell W. and McDonald E. J. (2000) WRC Bulletin 455. - "Direct Measurement of Residual Stresses at a Repair Weld in an Austenitic Steel Tube", Edwards, L., Bouchard, P. J., Dutta, M. and Fitzpatrick, M.E. (1998) in Proc. of Int. Conf. on Integrity of High Temperature Welds IMechE, Professional Engineering Publishing Ltd, London ISBN 1 86058 149 8, pp. 181-192. - "Validation of Finite Element Residual Stress Predictions of a Manual Metal Arc Stainless Steel Pipe Girth Weld", Santisteban, J.R., Edwards, L., and Bouchard, P.J. (2000) presented at Institute of Physics "Workshop on Neutron Scattering and Materials Modelling " Salford University 19-20 April 2000. - "Residual Stresses near Repairs in a 19.6mm thick, 412mm Diameter Stainless Steel Pipe Girth Weld, Bouchard, P.J. (2001) British Energy Engineering Report: E/REP/ATEC/0034/GEN/01. - "Improved Structural Integrity through Advances in Reliable Residual Stress Measurement", Edwards, L and Santisteban,J.R. (2001) Presented at ICNS2001, International Conference of Neutron Scattering 2001 and accepted for publication in Applied Physics A. Material Science & Processing. - "Optimizing Structural Integrity Through Reliable Residual Stress Measurement, Edwards, L. (2001) Proc ICF10, The 10th International Conference on Fracture, Honolulu, 2-7 December 2001. - "Validated residual stress profiles for fracture assessments of stainless steel pipe girth welds". Bouchard P. J., Submitted to International Journal of Pressure Vessels and Piping. - "Residual Stresses near repairs in a 19.6mm thick, 412mm diameter stainless steel pipe girth weld". Edwards L et al. In preparation for submission to Special Repair Weld Issue of International Journal of Pressure Vessels and Piping. - "Direct Measurement of Residual Stresses at a Repair Weld in an 20mm thick 170mm diameter Steel Tube", Edwards, L. et al . In preparation for submission to Special Repair Weld Issue of International Journal of Pressure Vessels and Piping. - F.X. Maillart "Scanning of residual stresses around a cold expanded hole in an aerospace alloy using synchrotron radiation diffraction". Undergraduate thesis, Universite Catholique de Louvain, June '99 - L. Ryelandt, C. Salmon and F. Delannay "Neutron Diffraction Analysis of the Evolution of Phase Stresses during Plastic Straining of Aluminium Matrix Composites Reinforced with a Continuous, Random Planar Network of Fibres ". Materials Science Forum Vols. 347-349 (2000), pp. 486-491 - Q. Furnemont, P. Jacques, T. Pardoen, and F. Delannay "The Macro and Micromechanics of TRIP-Assisted Multiphase Steels, Experiments and Modelling". J. de Phyique IV, in press - MECA-SENS (2000) (A. Steuwer, P.J Withers and R.Burguete, Journal of Neutron research, Vol. 9, No. 2-4 (2001)). - G.Albertini, E.Girardin, A.Giuliani, T.Lorentzen and F.Valente "Stresses in a Formed Steel". Int.Conf.MECASENS 2000- Reims (F) 13-14 Dec. 2000. Poster communication - G.Albertini, E.Labbe, A.Lodini, A.Manescu, R.L.Peng and A.Ponzetti "Neutron Measurements and Finite Element Analysis of Stress in a Centrifugal Bowl made of Duplex. Steel" Int.Conf.MECASENS 2000- Reims (F) 13-14 Dec. 2000 Poster communication - G.Albertini, R.L.Peng,A.Manescu and A.Ponzetti "Neutron Diffraction Measurements of Residual Stress in a Centrifugal Bowl of Duplex Steel" J of Neutron Research (in print) - G.Albertini, A.Giuliani, R.L.Peng, A.Manescu and A.Ponzetti "Neutron determination of the residual stress in a centrifuge bowl after 250 hours centrifugation" International Conference on Neutron Scattering, ICNS 2001 - Munich (D) 9-13 Sept 2001- Poster communication - G.Albertini, A.Giuliani, R.L.Peng, A.Manescu and A.Ponzetti "Neutron diffraction determination of the residual stress in a centrifuge bowl after 250 hours centrifugation" Applied Physics A (in print) - A. Steuwer, P.J. Withers, R. Burguete " The d0-distribution in Al-2024 Friction Stir Welds"Journal of Neutron Research, Vol 9, No.2-4 (2001) - A. Steuwer, P.J. Withers, J.R. Santisteban, L. Edwards, M.E. Fitzpatrick, M.R. Daymond, M.W. Johnson "The Sin2y-Method in Pulsed Neutron Transmission", Journal of Neutron Research, Vol. 9, No.2-4 (2001) - A. Steuwer, M.Preuss, P.J.Withers "Measurement of Residual Stresses in Friction Stir Welds using Neutron and Synchrotron X-ray Diffraction", to be submitted to Mat. Science and Engineering A. - E. Gosselin, "Measurement of the Unstrained Lattice Parameter in Friction Welds", Materials Group M58, Prof. Ch. Braham, ENSAM, submitted, awaiting approval of the Examination Board - S. Matthies, M.R. Daymond H.G. Priesmeyer On the Diffractive Determination of Elastic Single Crystal Constants Using Polycrystalline Samples J.Appl.Cryst. (2001), 34, 585-601 - Microstrain Investigation by Diffraction Line Broadening Analysis using Neutron and Synchrotron Radiation Techniques A.LODINI 80 th Anniversary Meeting of Faculty Techniques of Cracovie, June 1999, Poland (conference invitee) - Methods and Problems in Residual Stress Determination by Neutron Diffraction in different type of composites A.LODINI International School on Advanced Material Science an Technology of Composite Materials, August 1999, Jesi, Italy (conference invitee) - Residual Stress Evaluation by Neutron and Synchrotron Radiations, A.LODINI 8th International Symposium on Radiation Physics, Prague, Juin 2000 (conference invitee) - Residual Stress Measurement in Welded Materials A.LODINI International Conference Thermec 2000, December 2000, Las Vegas, USA, (conference invitee) - Evaluation of residual stress by neutron diffraction in biomaterials " A.LODINI International School on Advanced Material Science and Technology Augu - Residual Stress Evaluation in Railway Wheel/ Axle " E.LABBE- N.POISSON- C.PRIOUL- A.LODINI Journal of Neutron Research, vol. 9, 393-397, 2001 - The Recent Development of Neutronic Techniques for Determination of Residual stresses. Radiation Physics and Chemistry, vol 61, 2001, 227-233 Proceeding of Meca Sens 2000- A.LODINI - M.FITZPATRICK Journal of Neutron Research, volume 9, no 2-4, 2001.