Multiple induction heating of mating points in the context of automated assembly and testing processes

Project Information

Grant agreement ID: BRST960282

Project closed

Start date 15 November 1996

End date 31 October 1997

Funded under

• Specific research and technological development programme in the field of industrial and materials technologies, 1994-1998

Total cost € 0,00

EU contribution No data

Coordinated by

Teamtechnik GmbH Montage- und Prüfsysteme
Germany

Objective

The subject of this development plan is an assembly process e.g. for car and motorcycle transmissions with insertion areas of different dimensions. It deals with the topics : 1. Induction warming of many insertion points to the same temperature dependent on the dimensions and different material accumulations; 2. Realizing the temperature measurement over time as well as realizing the power and distance measurements in the interest of quality control and safety, visualizing the measurements results for operation of the facility; 3. Develop the handling systems to positioning the multiple inductors, positioning the work components and for the insertion process with the goal of automating the assembly process; 4. Develop the controller software, interface for standard software. The possibilities for a practical and new method for motor and transmission preparation means the chance of getting into the international market for participating companies. The subject of this development plan is an assembly process e.g. for car and motorcycle transmissions with insertion areas of different dimensions. It deals with the topics : 1. Induction warming of many insertion points to the same temperature dependent on the dimensions and different material accumulations; 2. Realizing the temperature measurement over time as well as realizing the power and distance measurements in the interest of quality control and safety, visualizing the measurements results for operation of the facility; 3. Develop the handling systems to positioning the multiple inductors, positioning the work components and for the insertion process with the goal of automating the assembly process; 4. Develop the controller software, interface for standard software. The possibilities for a practical and new method for motor and transmission preparation means the chance of getting into the international market for participating companies.

Fields of science

• natural sciences › computer and information sciences › software

Programme(s)

• FP4-BRITE/EURAM 3 - Specific research and technological development programme in the field of industrial and materials technologies, 1994-1998

Topic(s)

• 030202 - Vehicle production

Call for proposal

Data not available

Funding Scheme

EAW - Exploratory awards

Coordinator

Teamtechnik GmbH Montage- und Prüfsysteme

• EU contribution: No data
• Address: 31,Zeppelinstrasse ; 15370 Fredersdorf ; Germany
• Total cost: No data