Multiple induction heating of mating points in the context of automated assembly and testing processes

Informacje na temat projektu

Identyfikator umowy o grant: BRST960282

Projekt został zamknięty

Data rozpoczęcia 15 Listopada 1996

Data zakończenia 31 Października 1997

Finansowanie w ramach

• Specific research and technological development programme in the field of industrial and materials technologies, 1994-1998

Koszt całkowity Brak danych

Wkład UE Brak danych

Koordynowany przez

Teamtechnik GmbH Montage- und Prüfsysteme
Germany

Cel

The subject of this development plan is an assembly process e.g. for car and motorcycle transmissions with insertion areas of different dimensions. It deals with the topics : 1. Induction warming of many insertion points to the same temperature dependent on the dimensions and different material accumulations; 2. Realizing the temperature measurement over time as well as realizing the power and distance measurements in the interest of quality control and safety, visualizing the measurements results for operation of the facility; 3. Develop the handling systems to positioning the multiple inductors, positioning the work components and for the insertion process with the goal of automating the assembly process; 4. Develop the controller software, interface for standard software. The possibilities for a practical and new method for motor and transmission preparation means the chance of getting into the international market for participating companies. The subject of this development plan is an assembly process e.g. for car and motorcycle transmissions with insertion areas of different dimensions. It deals with the topics : 1. Induction warming of many insertion points to the same temperature dependent on the dimensions and different material accumulations; 2. Realizing the temperature measurement over time as well as realizing the power and distance measurements in the interest of quality control and safety, visualizing the measurements results for operation of the facility; 3. Develop the handling systems to positioning the multiple inductors, positioning the work components and for the insertion process with the goal of automating the assembly process; 4. Develop the controller software, interface for standard software. The possibilities for a practical and new method for motor and transmission preparation means the chance of getting into the international market for participating companies.

Dziedzina nauki (EuroSciVoc)

Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego.

• nauki przyrodnicze › informatyka › oprogramowanie

Aby użyć tej funkcji, musisz się zalogować lub zarejestrować

Program(-y)

• FP4-BRITE/EURAM 3 - Specific research and technological development programme in the field of industrial and materials technologies, 1994-1998

Temat(-y)

• 030202 - Vehicle production

Zaproszenie do składania wniosków

Data not available

System finansowania

EAW - Exploratory awards

Koordynator

Teamtechnik GmbH Montage- und Prüfsysteme

• Wkład UE: Brak danych
• Adres: 31,Zeppelinstrasse ; 15370 Fredersdorf ; Niemcy
• Koszt całkowity: Brak danych