Objectif
In the bicycle, furniture and automotive industry the interest is centred on the use of aluminium tubes for frames. The advantage of aluminium alloys is the light weight, compared to steel tubes. However, the joining of aluminium is much more difficult than steel. The reason is the high melting, tenacious oxide layer, formed immediately on aluminium, when it is subjected to air. Brazing of aluminium is very difficult and for welding only Gas Tungsten Arc (GTA) and Gas Metal Arc (GMA-welding can be applied in production. GTAW gives the highest quality and is widely used in bicycle and furniture industry, but the process can not be easily mechanised or robotised for the thin walled tubes to be joined. So hand welding is the alternative and due to the low wages in Asia most of the bicycle frames are manufactured there. The PPAW-process has shown on steel welding, where direct current (dc) is used, to be capable of hand, mechanised and robotic welding with a quality surpassing that of GTAW. It is thought, that the same will be true for the welding of aluminium. The PPAW process, however, is so new, that the special problems for aluminium welding, e.g. welding with alternating current (a.c.) current, supply of filler material and coping with potential weld defects like porosity and hot cracking are not at all solved, yet. The aim of the project is to make PPAW suited for a.c-welding and to develop the welding procedures to join sheet, thin walled tubes, formed sheet or small diameter rods of aluminium alloys. The expected achievements for the end users (4 SME's, 1 other) are: 1. improvement of the productivity by at least 25%,2. Iower processing costs by saving of weld metal 50% and a lower energy consumption of 10%, 3 improved product quality (good appearance) and 4. lower post finishing (grinding) by at least 90%. For these five end users, the total benefits amounts to 2.25 MECU per year by the introduction of this new technology in their production lines. This is based on 15% reduction in production costs. The expected achievement for the PPAW machine suppliers and robot suppliers (2 SME's, 1 other proposer) is to supply a.c.-machine for aluminium welding which can be used by other industries such as automotive, household articles and furniture. For the machine/robot suppliers, the total benefits amounts to 74 MECU per year. For the users of this technique in different industries, the ttal savings are estimated as 50 MECU per year. The consortium consist of - Suppliers of welding machines: Plasma Modules and Lappe + Marksmann, - Robot supplier: Cloos, - End users: Flevobike, Steco, Bakker, Handicare and ARC( on behalf of Hydro). - Material suppliers: SAPA and ALPOCO and - the RTD performers: TNO and SINTEF. The listed objectives of the proposed project directly refer to the priority areas: of the Brite/Euram III programme; 1 . 1. 1 .S ( adaptation and application of new technologies), 1.1.3.S (development of new production processes for automation), 2.1.1.S ( manufacturing at reduced costs for increased functionality of existing engineering materials and high added-value products).
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles sciences chimiques chimie inorganique métal de transition
- sciences sociales sociologie relations industrielles automatisation
- ingénierie et technologie génie mécanique génie automobile ingénierie automobile
- sciences naturelles sciences chimiques chimie inorganique métal pauvre
- sciences sociales économie et affaires économie économie de la production productivité
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
00740 Helsinki
Finlande
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.