Objectif
The engineering workshops throughout Europe are predominantly SMEs. Higher demands in recent times have been put on those SMEs to increase productivity whilst at the same time they are being presented with increasingly more difficult to cut materials which is beyond the capability of their present machine tools. Although substantial improvements in cutting tool materials have been achieved in recent years these have been developed to be used with more robust, sophisticated and expensive machine tools which the average SME finds difficult to acquire.These conflicting requirements call for a set of new tools which can bridge the gap between the harder and more abrasion resistant cemented carbide/ceramic tools and the more conventional HSS's which are inherently tougher and more benign to intermittent cutting operations. This proposal seeks to introduce a range of alloys tested in a feasibility study and shown to offer encouraging improvements when used in intermittent cutting operations over the best available HSS. The programme of work outlined in this Stage 2 Proposal seeks to further develop the technologies for producing a range of compositions specifically designed to address machining operations such as milling, drilling/reaming, gear cutting/hobbing. This is a good representative range of machining operations that call for high hot hardness and good toughness of cutting tool materials. PM techniques including Mechanical Alloying and Hot Isostatic Pressing will be utilised to produce near net shape blanks from which the relevant tools can be produced. These will be tested under controlled laboratory conditions and industrially on a range of alloys including advanced steels, superalloys and titanium alloys. It is anticipated that a range of compositions will be derived and tools made from these will be tested under various machining conditions so that machining data can be generated for the subsequent exploitation of these technologies/materials. Anticipating the difficulties in introducing new tools to the Industry, a consortium has been assembled covering all the elements of the supply chain to make the exploitation easier. It is estimated that the benefit to the SME partners will be 5.45 MECU over the 5 years after the end of the project and to SMEs outside the consortium 108 MECU.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles sciences chimiques chimie inorganique composé inorganique
- sciences naturelles sciences chimiques chimie inorganique métal de transition
- ingénierie et technologie génie mécanique ingénierie de fabrication fabrication soustractive
- sciences sociales économie et affaires économie économie de la production productivité
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
B66 2JR Smethwick - Warley
Royaume-Uni
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.